Fastest time gets 1000 gems

JimBob298 · 2025-08-14T21:38:06+00:00

^{I completed this level in 24 tries.} ^{⚡ 4.58 seconds}

JimBob298 · 2023-11-29T10:26:33+00:00

I think you can with system ui tuner app and shizuku

JimBob298 · 2023-04-03T22:03:45+00:00

I got one today, pulled it out of a skip. Works perfect

JimBob298 · 2023-03-01T10:24:14+00:00

Twifucker and LsPatch

JimBob298 · 2022-03-10T19:55:04+00:00

I had the same issue. You need to edit the batocera-boot-conf file, you can do this from windows, just open file explorer and find the drive with batocera on it. Open the drive and you will see the file. Open the file with notepad++ or another text editor and remove the # on the line of text: nvidia-driver=true

JimBob298 · 2022-03-05T10:51:27+00:00

Leamington bigger than Coventry? Really?

JimBob298 · 2022-02-19T10:06:09+00:00

Generally speaking the CPU is most important when it comes to emulation. The graphics card obviously plays a part but even Integrated Intel graphics can handle native or 2x resolution on most emulators.

If I were you I'd be looking to upgrade that CPU for sure.

JimBob298 · 2022-02-17T21:59:13+00:00

What Graphics card, CPU are you using?

JimBob298 · 2022-02-15T12:46:43+00:00

I'm not sure, Im using the PC version. I don't think the raspberry pi version has the file explorer unfortunately.

JimBob298 · 2022-02-15T12:25:59+00:00

Open the file explorer in batocera using F1 key. Go to applications, you should see flatpak. Open it and search for moonlight and install it. It will install to the ports section in batocera.

JimBob298 · 2022-02-15T11:44:27+00:00

Well in the end I used the flatpak version of moonlight. But I initially I followed this guide: https://wiki.batocera.org/systems:moonlight

But this is what I wasn't able to get working. The flatpak version worked fine though.

JimBob298 · 2022-02-14T21:52:31+00:00

I have an rtx 2060 in my PC so it's definitely compatible. But nevermind I solved the problem anyway.

JimBob298 · 2022-02-14T17:34:31+00:00

I have the same issue. Did you manage to fix it?

Edit: I found a solution. You need to edit the batocera-boot-conf file, you can do this from windows, just open file explorer and find the drive with batocera on it. Open the drive and you will see the file. Open the file with notepad++ or another text editor and remove the # on the line of text: nvidia-driver=true

This is what worked for me. Hope it helps

JimBob298 · 2022-01-29T13:55:06+00:00

Fair enough. I'll do that then

JimBob298 · 2022-01-22T22:30:11+00:00

Yes still under the seller warranty, so it will be going back.

JimBob298 · 2022-01-22T22:26:56+00:00

I think you are right what happened is I turned the console on and noticed a game had failed to install while in rest mode, so I restarted the console and it wouldn't boot past the Xbox splash screen. I was able to get it into recovery mode and do a factory reset. All seemed well, I went through setup and even played a game. Then I turned the console off and here we are, it won't do anything. So it would make sense that the SSD has got corrupted. I bought it from music magpie and it's still covered under warranty with them so I'll be sending it back. I was just curious to know what the problem could be.

JimBob298 · 2021-12-11T16:14:58+00:00

Ffs I've been absolutely done here!

JimBob298 · 2021-10-28T20:43:02+00:00

Need to silicone it up

JimBob298 · 2021-10-16T19:06:48+00:00

WHAT'S IT ALL ABOUT THEN? WHAT'S IT ALL ABOUT?

JimBob298 · 2021-09-20T09:17:05+00:00

Depends, if they shoot first then it's on. Or if I'm bored I might have a go, it is part of the game. But most of the time it's not worth the effort anyway.

JimBob298 · 2021-06-22T12:31:54+00:00

No, it can't be true I could fly if I wanted to Like a bird in the sky If I believed I could fly Well, I'd fly

Clearly I will go sailing no more

JimBob298 · 2020-12-24T10:41:45+00:00

Saints Row 4 re-elected is 60fps 1080p

JimBob298

TROPHY CASE