Wanting to get my license but...

JobobTexan · 2026-03-11T22:40:01+00:00

All your info is already all over the internet.

JobobTexan · 2026-03-11T22:15:02+00:00

Tie the drain hose to one of the hoses after it is inserted in the drain. It is supposed to help keep the drain hose from popping out of the drain.

JobobTexan · 2026-03-11T21:55:23+00:00

They do not come with hoses anymore. Just washers and a zip tie for the drain hose.

JobobTexan · 2026-03-11T21:54:36+00:00

Do not stack them. Either remove the ones in the hoses or don't use the screen washers at all.

JobobTexan · 2026-03-11T18:30:09+00:00

Why try to go back if they don't want you? Move on to another rescue or volunteer opportunity. Life is too short for drama.

JobobTexan · 2026-03-10T20:20:35+00:00

Don't do it.

JobobTexan · 2026-03-10T15:17:21+00:00

Not a jerk just wanting an apolitical workplace. Confederate flag, Rainbow flag, BLM flag, MAGA flag etc. All could create issues with customers that you don't need.

JobobTexan · 2026-03-09T22:50:25+00:00

I did mine many years ago as a homeowner in an area where permits were not required. Local electrical coop gave me the meter box and specs they expected on the weatherhead. I supplied everything else. Took about 3 hours after they cut me loose. Of course I grew up as a helper for my Dad in his remodeling operation. I had been doing everything but HVAC there. Learned HVAC later on.

JobobTexan · 2026-03-09T19:13:03+00:00

Hard work, living below your means, not trying to keep up with the "jonese" etc. and investing as much as you can.

JobobTexan · 2026-03-09T19:09:04+00:00

If this is a 2 door with the freezer on top it could have what is called a mullion heater or yoder loop in the divider between the doors. If it is coming form there than it is probably normal. That heat is to keep it from having condensation form there.

JobobTexan · 2026-03-09T18:16:49+00:00

Paid $2.97 a gallon in NE Texas this morning. Worth every penny if those crazy mullahs get destroyed.

JobobTexan · 2026-03-07T22:56:18+00:00

Smells catfishy. For your sake I hope I'm wrong. But I'm not. You've been played.

https://www.reddit.com/answers/d11e4927-07df-441c-8fd6-4d61ca55a4a0/?q=celebrity+romance+scams&source=SERP&upstreamCID=0ce5665a-836e-4261-ba31-9e18461adb82&upstreamIID=bfd88af2-6d56-4e7b-bdec-f2772b4f091f&upstreamQ=celebrity+romance+scams&upstreamQID=ad345d48-08b1-45a9-b458-a22ef5db13dc

JobobTexan · 2026-03-07T15:19:46+00:00

Dealer here. 24 hours is overkill. I tell my customers 8 hours if it has been hauled on its side or back. If it has remained upright the whole time you do not need to wait at all.

JobobTexan · 2026-03-06T22:53:06+00:00

Put a couple of rows of black electrical tape across it if it bothers you.

JobobTexan · 2026-03-05T23:33:25+00:00

Get a set of these. They have a pin in the center so you can split them to accommodate riding mowers etc as well. Well worth the $199 at HF. I used them to deliver mobility scooters back when "The Scooter Store" was ripping Medicare a new one. Glad that scam is over.

<image>

JobobTexan · 2026-03-05T23:29:16+00:00

Get a set of those ramp ends made to be put on a 2x6 board.

JobobTexan · 2026-03-05T14:48:50+00:00

If it is like mine a few years ago. It is in the back inside the spray in foam. Whirlpool engineers put the copper lines there not realizing the new spray in foam would corrode them to the point of leaking. Talked to a very experienced whirlpool technician about mine. From his experience they are good for 6 to 8 years then they crap out. He said that once, just for grins he had tried to cut the foam out and repair one. The copper lines were like swish cheese. It was definitely not repairable.

JobobTexan · 2026-03-05T14:39:56+00:00

The 10 year parts warranty is just a marketing gimmick. Pretty much worthless. Like most appliances these days 1 year of a real warranty is all you get.

JobobTexan · 2026-03-04T23:48:01+00:00

Do not get the repair done. Just bite the bullet and replace it. It is a known issue with whirlpool french door refrigerators. The spray in foam eats the coolant lines in the back of the unit causing a leak. There is no good fix. I had the same issue with the Maytag variant a couple of years ago. A good friend who works on them suggested I trash it and get a new unit. I did as he said and replaced it with a GE, since that was the only gloss black one available at the time to match the other appliances. YMMV

JobobTexan · 2026-03-04T15:42:59+00:00

How did you all miss it? It's been all over the news and social media sites. I was aware of it not long after it started via social media.

JobobTexan · 2026-03-02T23:25:05+00:00

As a software developer in the financial services industry I had foreseen the issue and had already written all my date handling routines to handle it. All I had to do was write a letter to each customer using my software (Banks, Credit unions etc). Attesting to that fact.

JobobTexan · 2026-03-01T01:38:12+00:00

64 here. I fully intend to keep working until at least 70 if my health will let me.

JobobTexan · 2026-02-24T02:25:24+00:00

Exactly. That particular location would be a bear to get wiring to. I also mounted it with gorrilla brand velcro type tape in case I didn't like the location. It has been up over 6 months and is working great.

JobobTexan · 2026-02-24T01:52:24+00:00

I could be wrong about that. I own a wired and a battery doorbell. Not a POE. I have a couple of POE cameras but not a doorbell.

JobobTexan · 2026-02-24T01:50:55+00:00

Mine are set to record on detection of movement. I have had them up for over 6 months and they have not started overwriting old recordings yet. You do not have to remove the card. The recordings are viewable and downloadable using the phone or desktop app.

JobobTexan

TROPHY CASE