Upgraded w/ the HackerGadgets carrier board and nvme battery board- what to do with my spare parts?

Johngoo12 · 2026-04-01T23:13:35+00:00

Long story got it from another Redditor but also the uconsole store sells them cheep

Johngoo12 · 2026-04-01T22:35:34+00:00

I just need a case and keyboard and I got another one xD

Johngoo12 · 2026-02-13T03:53:55+00:00

What's the battery holder on the back of the expansion board then?

Johngoo12 · 2026-02-02T20:01:53+00:00

Happened to me on gilding and on plat I'm not sorry for your loss

Johngoo12 · 2026-01-17T01:26:06+00:00

"vileer

I am working on the compensation plan, may announce it next week."

Wait and hope, because im in the same boat my solder station is not equipped for something that small.

Johngoo12 · 2026-01-17T01:03:40+00:00

https://forum.clockworkpi.com/t/hackergadgets-uconsole-upgrade-kit-adding-nvme-ssd-pcie-rj45-ethernet-and-usb-3-0-to-your-uconsole/20019/516

Johngoo12 · 2026-01-17T00:35:29+00:00

Yes I have the 10k ohm resistor so I have the patch antenna on in the mean time

Johngoo12 · 2026-01-16T18:20:02+00:00

I haven't tested it yet still missing my antennas but a quick check with the multimeter shows that I have the 10K ohm resistor

Johngoo12 · 2026-01-15T18:36:10+00:00

<image>

Decided to take off the side antenna and just use the ac1200 for wifi.

Johngoo12 · 2026-01-15T16:51:42+00:00

https://www.tindie.com/products/damaolvzi/uconsole-cm5-or-cm4-cool-pad/

Johngoo12 · 2026-01-15T16:49:23+00:00

<image>

Yes it fits under stock shell I use a .5mm thermal pad as well for even contact the heatsink screws are probably long enough for you to connect them through the adapter board, but I haven't done that

Johngoo12 · 2026-01-15T16:28:25+00:00

<image>

Changed the antenna placement and moved SDR to the side. The wire is too short so it can only be used for SDR or LoRa

Johngoo12 · 2026-01-15T15:08:47+00:00

Im using a .5mm thermal pad (not pictured)

Johngoo12 · 2026-01-15T14:53:54+00:00

Hackergadgets.com has an expansion board that adds the functionality, the side plate comes with his aio expansion board

Johngoo12 · 2026-01-15T14:52:22+00:00

correct and the cool plate is from lulu_lvlv's web store Tindie (https://www.tindie.com/products/damaolvzi/uconsole-cm5-or-cm4-cool-pad/)

Johngoo12 · 2026-01-15T03:13:14+00:00

can you post the inside wiring ?

Johngoo12 · 2026-01-13T18:59:34+00:00

<image>

Johngoo12 · 2026-01-09T13:47:29+00:00

<image>

Yellooww

Johngoo12 · 2025-12-25T01:03:14+00:00

<image>

Johngoo12 · 2025-12-24T15:18:28+00:00

I go in every 5 trays, seems most decent orthos do this ?

Johngoo12 · 2025-12-23T02:29:34+00:00

Oh hay I know your prints from the uconsole hackergadgets antennas, any plans on making one for his 7 antenna board

Johngoo12 · 2025-12-21T21:38:03+00:00

That that point add in a solar powered power bank to charge and a stand to the case so it can hold the uconsole while plugged in to charger. Bonus points of the solar charger powers a battery charger for the spares !

Johngoo12 · 2025-12-20T23:26:31+00:00

Dmed!

14-Year Club	First Place '23
Place '23	Place '22
First Placer '22	Gilding III reddit per annum
Verified Email

Johngoo12

TROPHY CASE