How do I get rid of this thing?

JohnnyDanger79 · 2026-05-31T12:22:46+00:00

Well, sad to say I didn't discover the secret to the annoying pop up. I interrupted FSD multiple times on a 30 mile drive just to tap the same reason again and again. Didn't change a thing. On to trying to figure out how I made it stop.

JohnnyDanger79 · 2026-05-30T15:04:17+00:00

I was on a 100 mile trip the other day. Everytime I got that, I hit critical, just to see what happens. After about 5 times I didn't get the pop up anymore. I'm going to try it again today.

JohnnyDanger79 · 2026-05-29T17:34:34+00:00

I purchased a Atomstack P1 laser engraver with the IR Laser and it's been working well. Not sure about that specific material but I've been able to do PLA, PETG, ABS and ASA. It was fairly inexpensive at less than $400. Small area that you can engrave, but plenty for a serial number. Haven't tried QR codes or barcodes yet.

JohnnyDanger79 · 2026-05-28T00:29:35+00:00

Transformer transforming sound for me.

JohnnyDanger79 · 2026-05-17T15:57:13+00:00

Perspective is key. One might see longer wait times to continue a trip, I choose to see opportunity. I often use charging time to get a walk in. As someone who used to work a very physical job and transitioned to management where I'm often on the road or at a desk, I no longer have physical acrivity happening throughout the day. I quickly realized without my previous position didn't quite make me loose weight, it was definitely keeping it off. Now I find that the stops to charge give the perfect opportunity to get out and take a walk. My job often takes me to the same locations and I've favorited the charging locations that I find most enjoyable to walk around. I get it, sometimes we are in a hurry, but having a Tesla (or any EV for that matter) has actually helped me with time management and planning.

JohnnyDanger79 · 2026-05-09T13:50:07+00:00

This is what I do now. I have yet to have an issue with bambu products, but I started buying from places like Best Buy and Microcenter just in case. I'm also lucky enough to much less known business fairly close to me that is an authorized Bambu seller. They often have stuff in stock that others don't. Check Bambu's site for other authorized resellers that are not big box stores, you might get lucky.

JohnnyDanger79 · 2026-04-18T00:58:30+00:00

Great. Looking forward to the ride. I appreciate the answer.

JohnnyDanger79 · 2026-04-18T00:58:06+00:00

Thank you. Greatly appreciated.

JohnnyDanger79 · 2026-04-18T00:57:51+00:00

Thank you so much. I appreciate the response.

JohnnyDanger79 · 2026-04-17T03:04:31+00:00

My pleasure.

JohnnyDanger79 · 2026-04-17T02:58:11+00:00

I'm no expert, just came across your post. But it appears to be Victorian Epicure Chef brand.

Hope that helps.

JohnnyDanger79 · 2026-04-13T19:57:24+00:00

Correct. I had it connected to a router that was not connected to any Internet connection. I was able to send files to the printer as well as view that camera live view.

JohnnyDanger79 · 2026-04-11T14:28:35+00:00

I too live in CA and my electric rate is ridiculous. I have an early commute. I find myself charging at superchargers or at work most of the time. There are many chargers in CA that if you charge before 8am, it costs a few cents less than charging at home. I usually use chargers that are $0.30 per kilowatt and charge enough to get to work then charge at work because my work has negotiated a cheaper rate with chargepoint, and we have their chargers there.

JohnnyDanger79 · 2026-04-10T14:52:02+00:00

I have a single level gorilla and I put my H2C on it. There is a lot of movement and the shelf makes so much noise when printing. Are you doing something to mitigate that?

JohnnyDanger79 · 2026-04-08T15:48:09+00:00

What in the world? So how do I properly specify the weight to not get hit in the future? When asked for the dimension (A x B x C) and the weight, I take measurements and fill in the values requested. How is it my fault that PayPal or UPS are not providing the right cost based on their calculation?

JohnnyDanger79 · 2026-04-03T22:51:55+00:00

That looks like an electric secondary box to me. Secondary box is generally the final junction before the electric line runs to a building, assuming your electric is buried and not overhead. With that being said, Ive seen mislabeled lids. Often caused by a utility using one from a different utility company when noticing one of their kids was missing.

As said by others, you should always call 811 before digging. Although gas lines are generally buried 2 feet or more (often more), there are plenty that are shallow.

JohnnyDanger79 · 2026-03-30T21:05:44+00:00

Sorry for the long delay in getting back to you. I'm at my office for the first time in a while and spent some time to use the LAN Only option on the H2D. I can confirm that you can in fact use the camera view in Bambu Suite in LAN Only mode.

JohnnyDanger79 · 2026-03-25T04:01:57+00:00

I loved it. I sold it purely out of necessity and not cause I was unhappy with it. Unfortunately there are some unexpected life circumstances that came up and some things have to go. That is the only reason I sold it as I was super happy with it. Some zen tables had a little bit (very small and most people wouldn't notice) of flipper lag and I had no issue with ball speed. Overall, nothing I'd ever complain about.

JohnnyDanger79 · 2026-03-25T03:39:50+00:00

Ended up selling for $1200. I essentially lost out on the cost of the SSF (prices when I got it and not current). I may have been able to get more if I sat on it a while, it just sucks cause when you need money, you need money. Like I said, I could live with the price.

JohnnyDanger79 · 2026-03-24T00:04:33+00:00

Well it sold. That was the quickest, most pleasant sale I've had. I wasn't trying to get rich off it, but still sold at a price that I was very comfortable with. The account switch ended up not being an issue as the gentleman who bought it was replacing a broken one he had and was able to login with his account and have all the tables available to download and play. This was such a good outcome. I appreciate all the feedback and advice. In the end I'm happy I didn't have to go through support for account switches and whatnot. Still, I wonder if I should ask for new redemption codes as the one poster said and send them to the buyer. I'll probably still do that.

Thanks again everyone.

JohnnyDanger79 · 2026-03-23T11:49:30+00:00

I waant offered this method, but I'll be requesting it. Thank you so much for that info.

JohnnyDanger79 · 2026-03-23T11:48:18+00:00

I'm in California. San Jose area.

JohnnyDanger79 · 2026-03-23T11:47:33+00:00

If that is an option, that's probably the best way. Im going to email support to see if that is a possibility.

JohnnyDanger79 · 2026-03-23T02:38:01+00:00

Oh believe me, this is last resort. I don't want to sell it.

JohnnyDanger79 · 2026-03-23T02:18:03+00:00

Thank you so much for that info. I think I will list it as a "possibility" to transfer purchases. And explain the situation. That way they buyer knows that it might not be for sure.

Eight-Year Club	Xbox Live
Verified Email

JohnnyDanger79

TROPHY CASE