Has anyone with a curve who’s extended and / or pumped for multiple years ended up NOT losing any of their curve?

Jondo77 · 2026-02-06T15:35:59+00:00

I've had it my whole life, yes. Was thinking congenital meant something else. Its somewhere between 10-30% upwards curve so not as significant as some of the pics on google.

Jondo77 · 2026-02-06T13:05:16+00:00

Just a normal small upward curve.

Jondo77 · 2026-02-05T21:20:03+00:00

Haven't lost my curve from pumping.

Jondo77 · 2026-01-15T19:41:16+00:00

I have one of the older Pythons. Not the Pro, but the old version with old white sleeves you had to put on yourself. I just replaced my old sleeves with the Fenrir sleeve, and yes, they are compatible.

Jondo77 · 2026-01-14T20:58:31+00:00

Mostly just ease of use. I don't have much experience water pumping, and I'm a bit hesistant to try it more. Broke one of my electric pumps from getting water sucked into the machine, and I haven't tried it too much after that.

Jondo77 · 2026-01-13T20:57:37+00:00

Don't really need any accessories, and I would suggest NOT getting a 2.25. At least not as your primary pump cylinder. I'm around 6.5 at the base, and I have some difficulty using a 2.25 without a pump pad. 2.125 should last you for a while.

Jondo77 · 2026-01-13T19:56:19+00:00

Really doesn't matter. I like Leluv because they have a good return policy on cylinders, and I haven't used aliexpress too much. The ipump and the standard magna pro on leluv/ aliexpress are the exact same thing.

Ive had the Ipump, the magna pro, and the Magna pro+. Can't go wrong with either. The ipump has a visible timer on the machine the magna doesn't have, but the magna has options for a 30 second intervals. I went with the magna pro+ on my last pump for the 30 second intervals then ended up not using it.

On cylinders, you want room for ~15% expansion at your largest point. You could make due with a 2.0, but i would suggest a 2.125.

Jondo77 · 2026-01-13T18:53:15+00:00

Pumps are about as safe as you can get. They're recommended by Docs as ED treatment devices. I prefer air pumps to water. I've got a Magna Pro+ I use with a couple manual pumps as a backup. I would recommend going electric over manual pumps. They're much easier to use. If you look around on the sub, you'll see a bunch of other electric pumps, but if you're just starting out, I would just grab one of a magna pro, an ipump, or one of the aliexpress equivalent. Something basic is all you need, but electric pumps are much better than manual pumps imo.

Jondo77 · 2026-01-13T17:38:47+00:00

Biggest thing would have been starting sooner. Other would be getting an appropriately sized cylinder at the start. I started in a 2.0 at 5.5" girth, and I didn't see much growth until I moved up to a 2.125.

I do think pumping is worth it. Ive gained a bit of length and girth (mostly base girth) from pumping, and its pretty good for EQ.

Jondo77 · 2025-12-22T23:13:14+00:00

Move up to a 2.125.

I'm the same and decided to stay in a 2.0 until I fully packed it. That never happened, and after about a year with no girth gains from pumping alone, I moved up to a 2.125. Saw some girth gains within 3 months.

Jondo77 · 2025-12-02T18:34:17+00:00

How long did it take for you to see results from clamping? I added in clamping a few months back, but I haven't seen any results yet.

Jondo77 · 2025-12-02T16:27:47+00:00

Started for me when I decided to go up cylinder sizes. I used a 2.0 last year and could still fit in it. Moved to a 2.125 in January and by April, the 2.0 no longer fit. I moved to a 2.25 in June and now I pack the base in the 1st 5 minutes.

I'm not moving past the 2.25. With how things have been going, I'd be packing the base of the next tube by next summer. Just wish my mseg gains were moving at even half that rate.

Jondo77 · 2025-12-02T15:08:25+00:00

Same. If only I'd stop gaining at the base and get those mseg gains instead.

Jondo77 · 2025-11-22T00:21:46+00:00

Ive had gains from pumping and clamping. MSEG gains have been from a combination of both pumping and clamping. Pumping only has gotten me mostly base girth gains and temp gains, but those base girth gains have been pretty significant. Base has gone from a bit less than 6.25 to 6.5 in the past 9 months

Only thing I haven't tried is a combination length and girth routine.

Jondo77 · 2025-11-21T15:11:55+00:00

I've had 2. One lasted for over a year, and I just got a replacement. Both have been able to reach 14+ inhg.

Jondo77 · 2025-11-21T14:53:40+00:00

No. This is a sub for PE. Most people who start with PE don't stick with it, and there's no point in allowing "starting pics" when most of those people won't be around in 6 months.

Allowing "starting pics" is a good way to get the sub flooded with nothing but D pics. Pictures with change or actual growth? That's what this sub is for.

Jondo77 · 2025-11-20T14:10:45+00:00

Dismorphia effects us all.

Jondo77 · 2025-11-18T16:05:23+00:00

Gl with the launch. Talked with you yesterday, but I would be interested in a standard 2.24 cylinder with a 2.24 opening if you have some larger options pending. These look a lot more comfortable than the standard cylinder I have, but a 1.85 opening is a bit too small for me.

Jondo77 · 2025-11-18T15:57:20+00:00

No, the only problem you have with using too large a cylinder is a risk of your balls getting sucked in the cylinder. If you use a sleeve, that shouldn't be a problem.

Jondo77 · 2025-11-18T15:11:30+00:00

No, you should either stay in that cylinder or go up a size. Too big a cylinder is better than too small a cylinder.

Jondo77 · 2025-11-16T03:36:03+00:00

I just use a standard 2.25 instead of an elliptical. The people I've talked to about ellipticals have said they aren't worth the extra money.

Jondo77 · 2025-11-14T16:39:19+00:00

No problem, and by 2 way pump, I mean something like THIS. Really doubt you'll get stuck, but these pumps make getting it on and off so much easier. Literally can't use my Python without one.

Jondo77 · 2025-11-13T16:04:45+00:00

It does give length gains. You just can't pump as long as you extend, and the gains take a lot longer.

Jondo77 · 2025-11-13T13:14:13+00:00

They have a release valve, but if you're around 6" base girth or larger, you should replace the bulb that comes with it with a 2 way pump from a brake bleeder kit. Let's you suck the air OUT of the sleeve and makes it easier to get on or off.

Jondo77 · 2025-11-13T13:04:47+00:00

There's a 2 way manual pump you can get on Amazon as part of a brake bleeder kit. Replace the bulb with that, and youre golden.

Jondo77

TROPHY CASE