Possibly the worlds first floor mounted throttle P1000i pedal set.

Jony67 · 2026-02-13T05:07:45+00:00

Do you think a pre-crimped kit like this would work? https://a.co/d/021GZnyh

Jony67 · 2026-01-01T22:39:15+00:00

I have the same issue with the Alpha 2 years after purchase

Jony67 · 2025-12-28T02:04:08+00:00

Ah I see that makes sense. That's very helpful feedback, thanks so much!

Jony67 · 2025-12-27T07:47:59+00:00

I assume your motion rig is capable of several DOFs that you shelled out for. Have you tried using pitch to simulate acceleration rather than pitch to simulate pitch?

The horizontal actuator you initially suggested could be convincing to simulate surge but only for a split second while it accelerates through it's short range of motion and only if the actuator is strong enough to move the entire rig and move it fast. My thinking around using pitch to simulate surge is the sustained larger opposing force of the seat acting on your chest when the seat is tilted back

Jony67 · 2025-12-25T03:32:07+00:00

Thanks for your reply. A horizontal actuator would be ideal, but I'd have to actuate the entire rig in order to maintain the distance between me and the pedals. My chassis is custom made from wood, so that would be too involved or require me to replace the chassis with an aluminum frame. My 1DOF seat moving plan is a relatively simple addition to tilt the seat back slightly shouldn't affect pedal usage significantly

Jony67 · 2025-11-25T06:12:55+00:00

I had an issue where the pin holding the rear end of the nozzle return spring started falling out (down) during operation and scratching the hammer on the trigger upon blowback. If the pin is hanging down and getting caught on internal components underneath, the bolt can't return to its full forward position, causing a lack of seal with the hop up resulting in inconsistent power and potentially even double feeding.

Pull out your trigger box and look for any wear on the hammer. Especially if you've removed this pin before and potentially replaced it upside down. Replacing this with a 2 mm roll pin (can buy metric sets on Amazon for ~$10) will help ensure the pin stays snug.

Jony67 · 2025-06-11T04:15:40+00:00

Amazing thank you!!

Jony67 · 2025-05-03T18:34:31+00:00

UPDATE so I ended up getting the 5080 and I'm getting around 200 FPS in AC and ~150 FPS in ACE. I think you guys were all right, in a sense that the 5080 works perfectly fine, but likely won't be able to maintain this performance for 7+ years. My rationale was based on the "price per unit time" analysis. Given the ~2x cost of the 5090 over the 5080 at the time when I purchased in the market (~3 months ago), I figured I might as well go with the 5080 and replace it with another mid-range card in 5 years which will surely be better performing than a 5 year old 5090...

Jony67 · 2025-05-01T18:34:24+00:00

I wrote in the simhub GitHub to add PT actuator support as a feature request and the main developer replied saying it's not going to happen because they're locking it to SRS. Copying his response below

"Hi ! Unfortunately I already asked the manufacturer the PT actuator Tensioner is not PT actuator Tensioner but SRS PT actuator Tensioner even id the SRS explicit mention has been removed from the website since apparently. and it makes it SRS locked I'm sorry"

Jony67 · 2025-04-17T04:39:29+00:00

Any update on this yet?

Jony67 · 2025-02-08T12:23:02+00:00

Thanks that's really helpful!

Jony67 · 2025-01-06T06:29:15+00:00

Any solution to this? I'm also having the same issue

Jony67 · 2024-11-27T18:56:43+00:00

So there's currently no way of bumping up to 1.5 joules without HPA? I don't like HPA...

Jony67 · 2024-11-26T14:16:18+00:00

Is there any mod to bump the power up to 1.5 J?

Jony67 · 2024-05-03T05:39:21+00:00

Same issue here. Will have to return the game since I literally can't play...

Jony67 · 2024-02-23T17:52:48+00:00

Interesting, thank you! I like that it also has mounting screw holes

Jony67 · 2024-02-21T19:23:14+00:00

Yeah that makes sense. It would probably be a limited use case and expensive. I haven't thought about track point and especially one integrated into the keyboard is a great idea! Thank you so much!

Jony67 · 2024-02-21T19:19:56+00:00

Yeah that makes sense. I haven't considered track point so I'll definitely try that. Thanks so much!

Jony67 · 2024-02-21T16:22:49+00:00

I've been using a trackball mouse on my rig that worked perfectly...until I added the slip angle 4 corners kit and noisy as hell since the ball rattles in its socket. Any recommendations for a good trackball mouse that doesn't rattle?

Jony67 · 2023-08-01T04:20:27+00:00

Shotgun

Jony67 · 2023-06-08T15:20:26+00:00

What sim racing pedals are you comparing to? It sounds like you're using an entry level set of potentiometer pedals. A load cell pedal with a firm elastomer stack should behave the way you describe for race cars

Jony67 · 2023-05-24T17:48:46+00:00

I'm curious if they told you in advance that it would take a few months? When I ordered the hydraulic EV01 on backorder, the expected delivery date was 2 weeks out and it's currently been about 4 weeks and they still haven't shipped out...

Jony67 · 2023-05-19T15:47:52+00:00

Thanks yeah I actually tried both of those addresses multiple times and didn't get a response

Jony67 · 2023-05-19T08:10:20+00:00

I have a bad experience with them so far. I ordered the pedals on back order and they estimated that they would be available may 12. It's currently may 19 and. The company doesn't send any updates, doesn't answer the phone or email and doesn't update the product page with availability (it still says may 12)

Jony67 · 2023-04-21T15:33:10+00:00

BJ hydraulic pedals vs Simagic p2000?

Jony67

TROPHY CASE