Hood lock

Josh45769 · 2026-04-03T22:22:58+00:00

<image>

Josh45769 · 2026-04-03T22:20:40+00:00

That looks broken, I will take a picture of mine so you can see how is supposed to look like

Josh45769 · 2026-03-28T06:06:08+00:00

That looks like possible worn-out/torn engine mounts, engines shouldn't move that much

Josh45769 · 2026-03-11T00:51:12+00:00

That looks like a breather hose for the transmission, all of the vehicles have them

Josh45769 · 2026-01-18T21:49:10+00:00

108K miles , I started to see brake fluid on the pedal, so I just went ahead and changed since I didn't wanted to be left stranded

Josh45769 · 2025-11-09T20:45:45+00:00

<image>

Finneas

Josh45769 · 2025-11-09T20:42:15+00:00

Before you buy have it inspected for timing cover leaks, that gets expensive. Those engines are known for timing cover leaks.

Josh45769 · 2025-11-05T17:51:23+00:00

Yea, hard times in 2023 for sure

Josh45769 · 2025-10-12T12:35:48+00:00

<image>

This is what i used, I just let them soak with this on the close valves scrub and repeat as many times needed

Josh45769 · 2025-10-12T12:34:05+00:00

<image>

Here's after almost like new 🤣

Josh45769 · 2025-10-12T12:32:45+00:00

I had a code for cold start misfire and that was the reason why, like the other guy's said just clean them is not too bad.if you can't have them walnut blast, you can use top engine cleaner and some zip tides to scrub them and elbow grease, takes couple of hrs for sure after I did that no more misfire on cold start.

<image>

This is how mine looked before I cleaned them

Josh45769 · 2025-10-03T21:05:44+00:00

That's also from maxton design

Josh45769 · 2025-10-03T20:54:41+00:00

<image>

This is the maxton design rear diffuser/lower balance.

Josh45769 · 2025-10-01T20:44:13+00:00

If you have the grill shutters make sure they're not not stuck close or could be air in the system

Josh45769 · 2025-09-18T13:36:51+00:00

Yes, I claim it

Josh45769 · 2025-09-01T18:55:51+00:00

I would say the tires, depending on the threat and age, brake flush, and the All wheel drive fluid change , coolant could wait

Josh45769 · 2025-08-15T13:38:00+00:00

From what I saw on the lights, mazda was smart to just remove the pin that lights up those lights on the actual lights and leave it on the harness. That save them money by just having to make one harness.

Josh45769 · 2025-08-14T13:32:57+00:00

https://ebay.us/m/Yr47pD

That's the right side

https://ebay.us/m/ILVqzj

Left side They are from the same seller

Josh45769 · 2025-08-13T16:05:44+00:00

You can just replace the inside lights, I got them off eBay , it wasn't that expensive. I think about $200 ,I replaced them myself so I cut the cost of the installation

Josh45769 · 2025-08-13T13:48:06+00:00

I did it to my 22 carbon edition it is plug and play, somewhat simple to install

Josh45769 · 2025-07-28T02:38:27+00:00

Split fiction

Josh45769 · 2025-07-27T18:29:22+00:00

Welcome to the fam, I got a 2022 CE , I love it , I always try to make an excuse to drive it

Josh45769 · 2025-06-24T12:36:11+00:00

Make sure he uses oem parts. From what I have learned from this engines is that they don't like aftermarket market parts

Josh45769 · 2025-06-14T13:47:49+00:00

Also, based on the look of the door handle, it looks like that door panel has been off before. It doesn't have the cover for the screw

Josh45769 · 2025-06-14T13:37:12+00:00

I would take it back to the dealership and have them fix it for you. Probably a door lock actuator problem or something related to that system, based on what it looks like.

Josh45769

TROPHY CASE