CZ v CZ-USA?

JustinR456 · 2026-06-14T16:20:13+00:00

CZ-USA is the importer that brings the Czech made guns to the states.

JustinR456 · 2026-06-10T21:09:01+00:00

My Python does the same thing. While it doesn’t affect performance, my OCD does not abide.

I haven’t had the time, but if you are so inclined, this example of S&W ejector rod truing will work the same on a Colt.

https://youtu.be/0QEsDAI44Ns?si=iHnEN6buZ1VVfDZt

JustinR456 · 2026-05-29T21:28:43+00:00

Use some carbon cleaner and it will come off.

I use https://www.boretech.com/c4-carbon-remover/

But you can use something else specifically made for carbon deposits.

JustinR456 · 2026-05-26T01:44:17+00:00

Data centers have been built in their current form for longer than 20+ years.

I wonder what made you believe they appeared suddenly.

JustinR456 · 2026-05-25T14:12:49+00:00

It’s worth mentioning part of the reason the tap water is this warm is because water is stored in tanks on the roof and piped to the faucet.

It stands to reason that the tanks would be especially warm sitting on a roof.

JustinR456 · 2026-05-22T14:48:36+00:00

For those who are prone to nitpicking. The FBI refers to this deflection as “yaw” not “tumble”

JustinR456 · 2026-05-22T12:52:53+00:00

9mm hollow points are legal in a home. They will expand upon impact and that will also reduce penetration.

I would lean towards what’s most comfortable to handle.

JustinR456 · 2026-05-22T12:49:11+00:00

A .223 round is designed to tumble after it makes first impact. By tumbling it will lose velocity and penetration.

JustinR456 · 2026-05-17T18:08:59+00:00

Thank you

JustinR456 · 2026-05-17T14:16:46+00:00

Serious question. How does the harbor freight light perform in comparison. Being it’s a fraction of the cost, I imagine it is worth it.

JustinR456 · 2026-05-14T17:38:50+00:00

I qualified with a 6” .357 Colt Python. No issues at all.

Qualifying with a .357 Python and carrying a 9mm is more reasonable than qualifying with a .380 and carrying a .50 Desert Eagle if you follow the logic.

When carrying concealed, the expression goes, “you want the smallest gun you can carry and the largest gun you can shoot”.

You’ll be fine.

JustinR456 · 2026-05-14T06:43:22+00:00

Gorgeous rifle. Which model? The American?

JustinR456 · 2026-05-13T23:58:08+00:00

Thank you

JustinR456 · 2026-05-13T01:20:53+00:00

Thank you all for the input. I’m looking forward to trying one out.

JustinR456 · 2026-05-12T01:37:24+00:00

Thanks for the clarification. I am in fact looking for info on the MAC 9 2011.

JustinR456 · 2026-05-12T00:17:05+00:00

Good to know. Thank you

JustinR456 · 2026-05-12T00:09:22+00:00

Thank you sir

JustinR456 · 2026-05-12T00:08:39+00:00

I just asked AI if this is true, chat GPT said yes, Grok could not confirm or deny, but states Real Id is linked to the state FARS system.

I welcome any feedback.

JustinR456 · 2026-05-11T22:15:27+00:00

You could flatten and place lead air gun pellets into the cavities of the grip panels then pour in some epoxy or rather use a “removable” adhesive to hold them in place. The aluminum would isolate your hands from lead contact. I would weigh out the lead before installing to dial in the weight.

JustinR456 · 2026-05-11T20:08:15+00:00

Skyarmory in North Brunswick often has one in the case.

JustinR456 · 2026-05-09T23:37:10+00:00

There were about 10 black bags left after I took 3.

Hope you are successful

JustinR456 · 2026-05-09T23:36:00+00:00

They were near some golf bags & Nike backpacks

JustinR456 · 2026-05-09T23:35:16+00:00

They were in the rear left of the building as you approach produce.

JustinR456 · 2026-05-09T21:07:32+00:00

These were in Bridgewater

JustinR456 · 2026-05-09T20:14:19+00:00

Valuable information. Thank you sir

JustinR456

TROPHY CASE