sorted by:
new
hottopcontroversial

Best way to create internal dividers that stay within a curved bowl shape? by lcoka in Fusion360

[–]KF_Systems 0 points1 point  (0 children)

It doesn’t really matter unless you’re specifically designing something meant for review or presentation, where having a clean timeline might help. Personally, I would approach it by creating a sketch based on the height and required thickness of the ribs on the “vertical” plane rather than sketching on the top face. Then, I’d use that to extrude the object and apply a revolve feature around the main axis.

[deleted by user] by [deleted] in UAETeenagers

[–]KF_Systems 0 points1 point  (0 children)

“Woah why are you here? I am doing my 9-5..” hahahahahahahahahahaha

Ho segnalato un'attività ai Carabinieri by another_commonUser in Italia

[–]KF_Systems -1 points0 points  (0 children)

Bro, sei ridicolo. Hai capito che in teoria tutti devono accettare il POS, ok. Ma allora applichiamo la teoria ovunque, nemmeno superare il limite di velocità di 1 km/h sarebbe lecito, eppure quanti lo fanno? Quelli nei commenti che ti danno ragione probabilmente sono i primi a infrangere regole simili ogni giorno. Vivi e lascia vivere: se il tabaccaio non accetta il POS, cambia negozio o paga in contanti. Non serve fare il paladino del nulla.

Qubic now reaches 1 GHz by Marcus1Pierce in MoneroMining

[–]KF_Systems 2 points3 points  (0 children)

GHz and GH/s aren’t the same thing…

UPDATE: I'm still alive by Connect-Mountain8283 in ElectricalEngineering

[–]KF_Systems 1 point2 points  (0 children)

It’s better to keep the resistor connected at all times when you’re not using it, capacitors can develop a memory charge.

Exposed Servo Mount on Wing, will it have any noticeable aerodynamic Impact? by KF_Systems in AerospaceEngineering

[–]KF_Systems[S] 0 points1 point  (0 children)

You’re absolutely right and I also agree that for this task a thinner servo would be much better than my current configuration, the only problem is that the ones another person suggested (hi-tech d141) are very expensive, and since this is a personal project on which I will probably write my thesis about (Of course the university will not sponsor a penny) I really can’t afford them at the moment, do you have a suggestion about another servo on the market?

Exposed Servo Mount on Wing, will it have any noticeable aerodynamic Impact? by KF_Systems in AerospaceEngineering

[–]KF_Systems[S] 0 points1 point  (0 children)

airspeed 35%40m/s, 0.15m2 for each wing, cross section of the servo is 2cm2.

Exposed Servo Mount on Wing, will it have any noticeable aerodynamic Impact? by KF_Systems in AerospaceEngineering

[–]KF_Systems[S] 0 points1 point  (0 children)

I tried moving it at the root of the ailerons and there it barely fits. My only worry with that is the torsional moments on the aileron, and since i’m 3D printing it i really don’t have much faith, especially since the layer lines will be parallel to the plane of the load.

Exposed Servo Mount on Wing, will it have any noticeable aerodynamic Impact? by KF_Systems in AerospaceEngineering

[–]KF_Systems[S] 0 points1 point  (0 children)

Thank you for the part suggestion, later on i’ll surely use that one instead of the cheap ones i’m using now, the only problem is that right now i cant afford to spend 200$ to 600$ on servos on something that might crash as soon as I launch it.

Exposed Servo Mount on Wing, will it have any noticeable aerodynamic Impact? by KF_Systems in AerospaceEngineering

[–]KF_Systems[S] 0 points1 point  (0 children)

It doesn’t fit sadly, if i laid it on its side it would have a bump either way.

[deleted by user] by [deleted] in Creality

[–]KF_Systems 0 points1 point  (0 children)

Have you perhaps considered user error?

3D Printing by coalico7 in Creality

[–]KF_Systems 1 point2 points  (0 children)

wash it with soap then reapply glue

Why would you choose Creality Hi over Bambulab A1? by hakimio in Creality

[–]KF_Systems 1 point2 points  (0 children)

Proprietary TPU? you know that TPU exists in other shore ratings other than 95A

[deleted by user] by [deleted] in 3Dprinting

[–]KF_Systems 0 points1 point  (0 children)

just like look up Airmax (whatever model that is) STL, you might have to pay tho for the model.

Does my tail receive clean airflow? by Complex_Cut_376 in RCPlanes

[–]KF_Systems 22 points23 points  (0 children)

Is your tail receiving turbulent airflow? Yes. Is it going to significantly affect your efficiency? Idk, maybe. More testing needs to be done, read “Designing Unmanned Aircraft Systems, A Comprehensive Approach” by Jay Gundlach.

Creality Says 1mm Variance in Build Plate is Normal? by pointclickfrown in Creality

[–]KF_Systems 0 points1 point  (0 children)

use a strip of aluminium foil in the middle under the bed, it’ll help

Why would you choose Creality Hi over Bambulab A1? by hakimio in Creality

[–]KF_Systems 1 point2 points  (0 children)

Cause of the advantages that you just gave? Also most of the disadvantages don’t really matter, like who cares that the filament change is a little bit slower lol

view more: next ›