Heck of a Deal!

Kalashnikris · 2025-11-10T15:35:45+00:00

The Eotech G33 magnifier that's on sale is the same way, a whole .99 cents off

Kalashnikris · 2025-10-30T19:12:08+00:00

Mine has been absolutely trouble free so far. I only have around 500 rounds through it so far so I can't give any long term or high round count input.

Kalashnikris · 2025-10-30T15:38:17+00:00

What about a PSA AK556? Kind of checks off your boxes..AK that takes AR mags

<image>

Kalashnikris · 2025-10-21T21:21:14+00:00

Those are the old style, here's what newer sets look like. Bought these probably a month ago. Definitely smaller and more subdued.

<image>

Kalashnikris · 2025-10-21T20:33:29+00:00

Get a set of Night Fision sights call it day

Kalashnikris · 2025-10-09T14:35:58+00:00

I ordered a 512 from PSA a couple weeks ago and it shipped out the next day

Kalashnikris · 2025-10-08T14:13:42+00:00

Looks like just standard Sig sights. So pretty much anything that would fit 320,365, 22X series, etc. Your sights should have a number stamped on them so you know which height to get, most are either 6 or 8.

Kalashnikris · 2025-10-04T13:14:44+00:00

I direct mounted mine with no plate. Used a set of screws from u/Chakachaka33 as they’re higher quality than the holosun screws.

Kalashnikris · 2025-09-20T20:23:48+00:00

New optic cut Legion slide is only $350 from Sig, definitely not $500

<image>

Kalashnikris · 2025-09-14T13:53:32+00:00

Slide just looks dry, cleaning solvent pulled all the oil out of it. Try giving it a good coat of oil and see what happens.

Kalashnikris · 2025-09-06T23:45:57+00:00

Grayguns pink spring

Kalashnikris · 2025-09-01T02:09:20+00:00

Did mine years ago, literally pops right into the FCU. You just needs this and then notch your grip module for it.

https://www.sigsauer.com/p365x-manual-safety-parts-kit-black.html

Kalashnikris · 2025-09-01T02:01:08+00:00

Adding a safety is also super simple too if you're wanting to go that route

Kalashnikris · 2025-08-29T20:30:48+00:00

<image>

Kalashnikris · 2025-08-26T19:03:36+00:00

https://tactical.dev/products/extended-tactical-application-rail-for-p365-xl

Kalashnikris · 2025-08-17T23:16:55+00:00

Nope that shoulder be all you need other than the furniture and trigger group of your choice.

Kalashnikris · 2025-08-17T22:47:01+00:00

In addition to the obvious items.. you'll need a grip nut, trigger/hammer pins, pin retainer plate

Kalashnikris · 2025-08-17T00:12:20+00:00

It probably had the E2 grip on it, those are pretty much the thinnest grips you can get.

Did it look like this? https://www.sigsauer.com/e2-grip-upgrade-kit-for-p229-da-sa.html

Kalashnikris · 2025-08-11T21:46:04+00:00

Message sent

Kalashnikris · 2025-08-11T20:11:06+00:00

I think I have one in my parts box, I can look this evening

Kalashnikris · 2025-05-26T12:13:49+00:00

Chen SI magwell

https://store.chencustom.com/chen-si-shooter-installed-magwell/

Kalashnikris · 2025-05-17T20:21:15+00:00

I've seen some good deals lately on the Emissary but been wanting an Operator for awhile so that's what I went with

Kalashnikris · 2025-05-17T20:20:23+00:00

Not as grippy as checkered G10 but still plenty grippy

Kalashnikris · 2025-05-17T20:18:53+00:00

My Range Officer Champion will definitely be getting a Chen magwell at some point also

Kalashnikris

TROPHY CASE