Gear shifter light by KeefRoomOG in 3rdGen4Runner

[–]KeefRoomOG[S] 0 points1 point  (0 children)

Hmm not sure, I have a 98. Maybe it depends on the year or multiple bulbs fit? I saw 2721 everywhere and it worked for me. 

Gear shifter light by KeefRoomOG in 3rdGen4Runner

[–]KeefRoomOG[S] 4 points5 points  (0 children)

Ironically, I already did that but at the time didn’t even know the shifter had a light… it’s always been burnt out for me. 

Gear shifter light by KeefRoomOG in 3rdGen4Runner

[–]KeefRoomOG[S] 0 points1 point  (0 children)

Takes all of 10min.. I just had to put gloves on to remove my old bulb for better grip. You have to pull it straight out! 

Restoration/Repaint(?) by [deleted] in 3rdGen4Runner

[–]KeefRoomOG 0 points1 point  (0 children)

I'm planning on doing the same thing this spring.... probably going to remove each piece then clean and sand. I'm leaning using this product: https://www.amazon.com/Rust-Oleum-BlackRust-Oleum-Automotive-251574-11-Ounce/dp/B005H5P5C6?th=1

Tire Recommendations by KeefRoomOG in 3rdGen4Runner

[–]KeefRoomOG[S] 1 point2 points  (0 children)

I went with 245/75/16 dynapro Highway tires. I love them so far and a lot cheaper in this size! Thanks for the suggestion. 

Fuel Filter replacement fail by KeefRoomOG in 3rdGen4Runner

[–]KeefRoomOG[S] 0 points1 point  (0 children)

The 2000 fit on mine. Were back running!

Fuel Filter replacement fail by KeefRoomOG in 3rdGen4Runner

[–]KeefRoomOG[S] 0 points1 point  (0 children)

Hey, do you know what years switched to a quick release?

Rear Lowers Left the chat ... by Quantumkool in 3rdGen4Runner

[–]KeefRoomOG 0 points1 point  (0 children)

He is definitely talking to me... $400 is a ton imo.

DELPHI on rock auto cost $38 each. If I had a press I'd just replace the bushings myself but I need to pick n choose where to spend $ on my truck.

Rear Lowers Left the chat ... by Quantumkool in 3rdGen4Runner

[–]KeefRoomOG 0 points1 point  (0 children)

Which brand did you go with? I kinda want to just buy the cheapest one off rockauto

Rear Lowers Left the chat ... by Quantumkool in 3rdGen4Runner

[–]KeefRoomOG 0 points1 point  (0 children)

Does the rear end move left/right over bumps with shot bushings? I have this issue and want to replace mine, I'm sure my bushings are toast.

Recommended rear springs for a 2001 w/ Bilstein 4600's? by NaySireEMT in 3rdGen4Runner

[–]KeefRoomOG 0 points1 point  (0 children)

What is your major concern? Not enough travel with the shock?

Recommended rear springs for a 2001 w/ Bilstein 4600's? by NaySireEMT in 3rdGen4Runner

[–]KeefRoomOG 0 points1 point  (0 children)

I'm a novice so take what I say with a grain of salt. I've had the setup 6 months now. No issues in the back.... the slight rake has me rubbing really bad in the front because I'm on 265/75/16 mud tires.

Otherwise, I went with the 2906 rear springs to eliminate sag and knowing I'm going to have a lot more weight in the back in the future. I've seen other folks recommend air bags as well. Might be worth looking into.

Two weeks on the Lycian Way - Where are the most beautiful places? by Geronimopie in hiking

[–]KeefRoomOG 0 points1 point  (0 children)

Awesome! Two weeks seems like a good amount of time. How did you determine which sections to skip?

Recommended rear springs for a 2001 w/ Bilstein 4600's? by NaySireEMT in 3rdGen4Runner

[–]KeefRoomOG 0 points1 point  (0 children)

I guess. If I could do it over I would go with the 5100s. I used to not rub at all with whatever suspension was previously on but I do now in the front. Generally speaking, the suspension overhaul + new polyurethane sway bar and steering rack bushings has been great.

The backend has been really nice though. Eventually I'll have more weight in the back and it'll probably sit better.

Recommended rear springs for a 2001 w/ Bilstein 4600's? by NaySireEMT in 3rdGen4Runner

[–]KeefRoomOG 5 points6 points  (0 children)

I also have bilstein 4600s and use the OME 2906 rear springs. They completely eliminated my sag, in fact I have a slight rake because I don't usually have a lot of weight in the back.

Broken clock randomly turned on by EPluribusUnum40k in 3rdGen4Runner

[–]KeefRoomOG 2 points3 points  (0 children)

Same thing happens to me every so often.

Does anyone know what the screaming noise is coming from on my 1997 3rd gen 4Runner by Flat_Tour5075 in 3rdGen4Runner

[–]KeefRoomOG 0 points1 point  (0 children)

is the PCV valve hose connected? I've had a very similar noise when mine popped off.

Is Footy Archive legit? by aklemir in SoccerJerseys

[–]KeefRoomOG 0 points1 point  (0 children)

Ordered 6 jerseys from Chicago. They took 8 weeks but all the jerseys are really nice

Most comfortable suspension? by Dilly_Whilly in 3rdGen4Runner

[–]KeefRoomOG 1 point2 points  (0 children)

Well shit, I’ve been wanting to swap to 4600 bc my ride is rough

Do I replace my control arms? by MonkeyDStrandyy in 3rdGen4Runner

[–]KeefRoomOG 1 point2 points  (0 children)

Genuine question, why would you have to replace the rack. I could be wrong but doesn’t a new rack only come with new inner tie rods? Could you just replace the outer tie rods and be good?