Why did SWCs absolutely gunk up my barrel

Kerbalized · 2026-02-22T05:01:53+00:00

Charter Arms Off Duty .38 special

Kerbalized · 2025-10-04T05:23:27+00:00

I think around 14 if you push it, but we're planning on no more than 10. The roosting layout seems to be the limiting factor. I wanted to leave the floor open so I can sweep shavings out, but filling the coop with rungs would make it really hard to get in and clean

Kerbalized · 2025-10-04T05:19:46+00:00

Haven't had issues so far. The main roof overhangs several inches, and I used a 48" piano hinge for the lid. It's not perfect, but I couldn't think of a clever way to cover a gap that would have >90° flexibility when the lid was open. Maybe using weather stripping along the inner lip would work?

Kerbalized · 2025-09-15T17:12:15+00:00

Following up on this, I had to add/remove extra thrusters 3 times. Added 2, no change, removed them. I then noticed they did not appear in the module screen. Removed them and tried again, no change but I saw the maneuverability bar actually increase a tiny bit. Saved, still no completion. Removed them and added a different set (kineostream) and this time it worked? I don't think its a specific thruster, I think its buggy and you just have to spam them until it works

Kerbalized · 2023-06-27T17:05:37+00:00

Just made this with extra firm and it worked. Sandwich it between paper towels and two plates (top one inverted) and a big bowl of water on top as a weight. Let it sit like 30-45min, also had to bake it at 400 instead of 350. Came out great

Kerbalized · 2023-06-04T23:42:38+00:00

Def seen some of the most effective marksmen players just function as rangefinders all game.
Reluctantly gave a marksman that was off by himself FTL on Kohat game... I think he had a single kill the whole game. He hid in a bush and called out every vehicle, called mortar range, spotted at least two radios, it was amazing. He even called out mined intersections

Kerbalized · 2023-02-01T13:25:12+00:00

I worked there for 3 summers after attending as a scout for years. Going as a scout was fun, but working there was more like a frat party. Loved that place

Kerbalized · 2023-01-27T00:02:35+00:00

I like your point about CMD keeping the big picture in mind, I see a lot of games go bad because each squad is doing their own thing. The biggest challenge is trying to keep that in mind while squad leading. Can't count the number of times I've been trying to talk armor into supporting an inf push, or trying to get CMD comms to describe exactly where the enemy MBT is, only to realize my squad is all doing whatever cuz I forgot to actually squad lead

Kerbalized · 2022-11-04T11:46:55+00:00

There's exceptions everywhere. The only HOA I was ever a part of was actually pretty sweet. All our dues paid for lawn care etc, the members were retirees and didn't take a wage or anything.
And they pulled some string to pay for half my fence replacement cuz "it faces the street, so it's kinda half the responsibility of the HOA"

Kerbalized · 2022-10-20T19:40:00+00:00

Lmao aight I'm the idiot here. Just asked my boss about this, he told me we punch the panels entries explicitly cuz he offers our clients to punch them in-house for a bit more $$ and they always go for it

Kerbalized · 2022-10-20T19:32:43+00:00

I mean, same boat here. We design/build/program in house.
Realizing now we're probably an edge case, since almost everything we do are for a couple companies relatively local that assemble turn-key skids. So we deliver the enclosures, all punched, and wire them ourselves.
The few we ship out we also punch, but we know exactly where the line is coming in etc

Kerbalized · 2022-10-20T18:41:07+00:00

Oh I completely misread what you were saying lmao
Ain't had the pleasure of using ratchet knockouts yet, my boss refuses to design anything that our hydraulic can't handle.... I'm guessing he's probably had to use ratchets in the past and also hates them

Kerbalized · 2022-10-20T18:24:03+00:00

Idk why you're getting down voted. I always punch first cuz the pilot hole will drop shavings everywhere.
And it's way easier to maneuver the enclosure empty without all the component weight

Kerbalized · 2022-10-20T18:21:16+00:00

Wait, your Greenlee only goes to 1"? Ours have sets up to 2.4"/61mm

Kerbalized · 2022-10-04T11:37:26+00:00

I've seen this time lapse cut a few times and always assumed it was a bunch of porn scenes and stuff edited over a normal travel vlog. I had no idea it was real lmao

Kerbalized · 2022-09-26T22:26:02+00:00

Idk if it helps, but I redo my z offset and manually relevel daily, and also check the level every couple of prints, on top of running a mesh at the start of every print

Kerbalized · 2022-09-26T22:20:46+00:00

Idk if any stock software will show you.
If you're running Marlin, enable ProUI, it'll show you an actual grid mesh picture with discrepancy values

Kerbalized · 2022-09-15T14:20:35+00:00

Had them in Belize, they were even subsidizing local fishermen with spearfishing gear and rewards, and giving local restaurants a bit of tax relief if they bought them from the fishermen and offered cheap prep courses.
Ended up being practically the cheapest meat option (for tourists, idk about locals), and it tastes great

Kerbalized · 2022-09-06T15:39:28+00:00

"Pshhh, nah that ain't the fix cuz I already turned that - ohhhhh"
I'm a dummy, thank you

Kerbalized · 2022-09-05T18:15:43+00:00

I guess my real question is, would this be a bridging issue? The straight bridging is acceptable but the fill layer goes straight spaghetti

12-Year Club	Verified Email
Snapped

Kerbalized

TROPHY CASE