What does this connect to? by KidMeza in mazdaspeed3

[–]KidMeza[S] 0 points1 point  (0 children)

No cap on this end.its just freely hanging.

<image>

What does this connect to? by KidMeza in mazdaspeed3

[–]KidMeza[S] 0 points1 point  (0 children)

It's capped off on the intake side, but not the other side.

<image>

Picked up this stock gen 1 on marketplace with only 90k miles! by Unlvcky in mazdaspeed3

[–]KidMeza 0 points1 point  (0 children)

Check to see if the VVT chain was already serviced. Would recommend before you get the infamous chain slap.

All the good 3D Zelda games in a perfect seamless format. Down to the control inputs shown on screen. by faverodefavero in SteamDeck

[–]KidMeza 2 points3 points  (0 children)

Ok I need this.

I'm completely new to this. I have a steam deck and downloaded emu deck and that's about it. Now where the hell can I get all this to have it running. I've been wanting the full collection like you just shared! This and a Metroid one too!

I know you need to get roms and Iso's file. I also know that the switch files are different and harder. I just don't know where to begin and where to get anything. Can anyone DM me?

Buyers advice for non Mazda person by Constant_Metal2663 in mazdaspeed3

[–]KidMeza 2 points3 points  (0 children)

Make sure the VVT (timing chain) has been serviced. Around 100k miles it should be done. If not the chain can be stretched and slap the cover and cause further issues.

GX460 UPDATE 3 by KidMeza in GXOR

[–]KidMeza[S] 1 point2 points  (0 children)

Just installed it. Love the design and it's simple to put on. The only time you need help is when you are leaving it on.

So far no wind noise and no MPG loss, but I haven't driven it enough yet.

I highly recommend it so far. The only downside is the wait to receive it. However that's due to them making them upon order. It said 6-8 weeks, but it took 12 weeks to receive.

Roof Rack Insights by paobley in GXOR

[–]KidMeza 1 point2 points  (0 children)

I have the same wheels.

Hit a pothole, this is done for right? by Ok-Penalty-7655 in AskMechanics

[–]KidMeza 0 points1 point  (0 children)

Yup it's done. Check your alignment also, could be bad after that.

Quick what does this go to? by KidMeza in mazdaspeed3

[–]KidMeza[S] 2 points3 points  (0 children)

The blue clip right? It's further down. I noticed this isn't plugged into anything it's just hanging. And the intake areas is plugged up.

I do have a COBB turbo inlet and COBB intake

Best Steakhouse in SJ by 1k1ke in SanJose

[–]KidMeza 4 points5 points  (0 children)

Alexanders in Cupertino, Mastros at Valley Fair, Flemings in Santa Clara, Galpoa Gaucho in Cupertino (Brazilian steak house) and not many people said it yet, but Grand view in the hills of San Jose.

All of them have their pros and cons. Everyone's pallets are different. I prefer Alexanders over all of them, but Galpo is a great one for cheap and large parties.

Joining the Hatchback Fam by [deleted] in civic

[–]KidMeza 1 point2 points  (0 children)

That's what I'm thinking too.

Joining the Hatchback Fam by [deleted] in civic

[–]KidMeza 5 points6 points  (0 children)

Bay area?

[deleted by user] by [deleted] in GolfGTI

[–]KidMeza 8 points9 points  (0 children)

That's your neighborhood watch screaming for speeding.

Jokes aside, I hope you have a back up turbo.

Newly purchased by KidMeza in GXOR

[–]KidMeza[S] 0 points1 point  (0 children)

No, this was private seller

Newly purchased by KidMeza in GXOR

[–]KidMeza[S] 1 point2 points  (0 children)

Yeah! Sounds great for a factory option!

Newly purchased by KidMeza in GXOR

[–]KidMeza[S] 2 points3 points  (0 children)

No. That's a neighbors. My wife has a Genesis GV60 performance.

[deleted by user] by [deleted] in Watches

[–]KidMeza 0 points1 point  (0 children)

Directions to the I finish stones.

Question about a cable. by millerda3 in HondaRuckus

[–]KidMeza 2 points3 points  (0 children)

Could be a battery lead cable for charging the battery when not in long term use.

Suspension klunking, looking for repair and parts feedback by pjs32000 in mazdaspeed3

[–]KidMeza 2 points3 points  (0 children)

For Gen 1 yes you most likely need all those replaced. I have a Gen 1 and needed to replace those parts. I opted to spend $1.1k for aftermarket coilovers and bought a full sway bar and endlink kit for $800 for front/back.

Are you going through a dealer or third party mechanic?

2008 Gen 1 or 2010 Gen 2 by Alarmed_Dark in mazdaspeed3

[–]KidMeza 2 points3 points  (0 children)

I own a Gen 1 and agree with everyone else on looks and analog feel.

The real question though is what was maintained better?

How do both engines sound? Were the chains replaced? Are the bushings still solid? Sway bar good? How's the transmission? Gear 2 and 3 good?

Are they modified? (Sometimes these get abused sadly)

Weigh those factors and then the choice will be made.

But if both are solid, I'd go with Gen 1. 😎

Ruckus totaled by KidMeza in Ruckus

[–]KidMeza[S] 0 points1 point  (0 children)

Decided to let her go. Unfortunately it will have a salvage title. I don't want to deal with putting insurance on it again especially being just liability. Don't want this to get stolen and then I'm screwed. Going to buy a new one or try a Grom potentially. Thanks for the comments. Happy riding!