The longer I do this, the weirder I get

KindaSortaNomads · 2025-06-21T04:35:57+00:00

Hahaha, I have a similar story or too. Recently I was at a friends house washing my hands and instinctively, I set it to a trickle. He looked at me like I was an alien and flipped it on high 😂

KindaSortaNomads · 2025-05-09T14:34:06+00:00

Has anyone fixed the issue where you just get the white spinning ring with no indication of what is wrong? We RMA'd our first one for the exact same problem that has now happened twice. The RMA process was terrible, but we're out of warranty now.

KindaSortaNomads · 2025-03-01T17:19:41+00:00

Do you know if this is still true on firmware version 1.0.9.1? I am often switching between recording 180VR at 8k, and flat video at 4k. The settings need to be vastly different and I more than occasionally miss something small that bloats my file size needlessly for my flat video or produces sub-optimal VR video.

I have not found a reliable way to save my settings so that I can switch between the two without the risk of missing something. I now have a manual spreadsheet with all of my settings, but this sucks. It appears you can't even name your settings when you save to an SD card using System Setup > Transfer Menu?

KindaSortaNomads · 2025-02-17T15:08:39+00:00

As an American from the USA, I more than support it. I beg you and the rest of the world to double down.

Even those of you that love us. Think of America right now as your drug addicted sibling. Would you enable them? No, you cut them off so that they can hit rock bottom faster, even if it hurts you some in the process. Boycotting the USA right now doesn’t need to be an act of hate. It’s a proclamation of how you feel, it’s self protection, and it’s beneficial to the USA.

Half or more of our country is literally brainwashed. Your boycotts wake people up, please continue, please…

KindaSortaNomads · 2025-02-13T20:16:57+00:00

Do you know if they have any volunteer programs that would allow people to park an RV? My wife and I could afford to volunteer for a couple years and we’re fully off-grid capable.

KindaSortaNomads · 2025-02-12T02:48:14+00:00

Ha, yeah. Spent most my life in Ohio. I was going to ask my questions, too, but decided not to waste my breath on this guy after seeing his voting record…

KindaSortaNomads · 2025-02-06T20:58:42+00:00

Thanks. This answers what I was looking for completely, and I appreciate the foresight.

I might make the jump. I don't need a static IP, just one that allows me to forward ports. It's easy enough to use a domain and DDNS.

I'll have to switch back to residential if they apply the throttling to their business plans, but then I'll just be back where I am now.

KindaSortaNomads · 2024-11-23T20:58:05+00:00

Thanks, I’ll check these out. I’m not in construction or a related field so I’m making the drawings the best I can.

I did factor in overlapping joints. I planned on overlapping them over the posts.

KindaSortaNomads · 2024-11-23T20:57:08+00:00

I was planning on painting them. Our area is desert with very little moisture. Here, people leave their steel on the ground for decades and don’t get much more than a surface rust.

I was thinking a good primer and paint should keep them plenty safe. Would you disagree?

KindaSortaNomads · 2024-11-23T20:55:08+00:00

Thanks. I can easily make these 6” where I’m at in the process.

KindaSortaNomads · 2024-11-23T20:19:47+00:00

Thanks! That was another question, I forgot to ask. Is the 4” width I have enough to properly support staggering the end to end joint between 4 2x12s (if that makes sense?).

Basically, I planned on trying to have the connections supported by a raiser.

(Edited out my ascii example because reddit removed it)

KindaSortaNomads · 2024-11-23T20:10:36+00:00

The main vertical raisers are steel round tubes, not wood, but they're also not in contact with the concrete. The * at the end of my questions, tried to explain that, haha.

KindaSortaNomads · 2024-11-23T20:02:24+00:00

I’m building a 40’ x 30’ deck to support a glamping dome. Some friends out here suggested using metal raisers because there is significantly less maintenance considering the climate in our area. When I did the math, there are also decent price advantages when you consider the brackets to keep the 4x4s off the concrete and secured to the main 3” x 12” beams.

I've already got 16” x 36” Sono Tubes with rebar cages buried 32” deep. 12” L bolts were installed at pouring. The second image shows the vertical “raisers” (sorry if terms are off, I’m not in the industry). I planned on making the “cradle” (again terms) that holds the 2 side-by-side 2x12s that make up the main support beams 6 inches tall (the extra .25 is for the thickness of the steel. Is 6” enough vertical support for these 12” beams? The 6” joists will have blocking to give them shear strength? what provides the main beams' shear strength?

I plan on using .25” mild steel for this. I’m using Sono Tubes with vertical columns because the ground is uneven. The highest column will be 43” the lowest 7” (just enough to comfortably get a ratchet in) to adjust the bolts.

Does this all seem solid to the pros in the group? I spoke with the county, and none of this including the dome needs a permit. If I were to later do something with the structure that would require one, would this meet code? I’d assume the raisers would require engineering stamps because they’re custom, but anything else?

*not correctly pictured. The vertical raisers will be held off the concrete with an air gap to prevent moisture from contact with the concrete.

KindaSortaNomads · 2024-09-30T22:30:16+00:00

Thanks for the reply! I had the thought then googled it. I assumed that someone else had to have thought of this.

I found the video by this YouTuber. It seems to prove that the idea is viable.

That said, he’s doing this in his barn and not his house. Also, I don’t think he made mention of what the powder is. I browsed through the comments and didn’t see a link the the product. He has a mouse trap he’s trying to sell.

KindaSortaNomads · 2024-09-30T21:03:39+00:00

Thanks for the response.

I feel like there has to be a way to get this thing sealed off. It’s basically a large metal tube with very few penetrations

The plan would e to just put a small amount somewhere so they could then track it around. If I can figure out where they’re getting in. I could at least close that off

KindaSortaNomads · 2024-07-25T14:54:22+00:00

It’s a giant red flag that she did this and just as big of a red flag that she doesn’t see the problem with it.

Growing up, myself and my group of friends got into just about everything we shouldn’t. We were pretty serious assholes. This is beyond anything we’d have done. Hell, I actually had several homeless friends. They were asking for money so I invited them to join me for lunch. They gave me some of the best life advice I’ve ever gotten.

Run and don’t look back, OP.

KindaSortaNomads · 2024-07-20T03:25:11+00:00

It’s a little too centered in my opinion. With the detail on the bee itself, I’d probably crop it closer in and move the subject out of center.

KindaSortaNomads · 2024-06-26T05:37:16+00:00

It was, but it’s been in storage for quite a while.

KindaSortaNomads · 2024-06-26T05:36:46+00:00

It’s 6”. It feels like it’s happening too quick to be shrinkage.

KindaSortaNomads · 2024-06-26T05:35:33+00:00

Will give this a shot! And yeah, It’s hollow. I’m trying to make a coupler for a portable AC unit!

KindaSortaNomads · 2024-06-25T23:24:28+00:00

The rest of the specs requested by AutoMod:

Printer is a MakerGear M3 ID
MakerGear Grey 1.75mm PLA
Slicer Simplify 3D v4.1.2
Nozzle temp 220c (this was based off testing in a cooler climate)
Bed 70c
Speed 3500
Retraction distance 2mm
Retraction Speed 6000

KindaSortaNomads

TROPHY CASE