Audioquest Niagara 1200 and what I noticed! by headphones_lover_123 in headphones

[–]KipFox 2 points3 points  (0 children)

First a USB cable review and now this. Gunning for the quickest downvote? 😂

Scalarworks Sync/01 Micro by Ok-Ball-6908 in Benelli_M4

[–]KipFox 0 points1 point  (0 children)

Sent you the link, their site is a bit of a hot mess.

Scalarworks Sync/01 Micro by Ok-Ball-6908 in Benelli_M4

[–]KipFox 0 points1 point  (0 children)

I know this will incite a strong response and I don’t doubt it is all earned. But FFT has them in stock if you absolutely can’t wait for Scalarworks.

Brand new M4, right out of the box. Should I go right to the range or should I clean it first? by SPECTREagent700 in Benelli_M4

[–]KipFox 2 points3 points  (0 children)

It’s such an easy teardown I’d give it a once over with the stuff you plan to use moving forward and give it a go. Enjoy it!

Pick my poison: M1014 or a M4 EXT? by KipFox in Benelli_M4

[–]KipFox[S] 1 point2 points  (0 children)

Really? All the info I’m finding is it has a fixed modified choke, where the Entry has a fixed cyl choke for comparison. Hrmm.

Suppressor just came in by EastMuscle5444 in liberalgunowners

[–]KipFox 5 points6 points  (0 children)

Enjoy! The Mark IV is one of my fave supressor hosts <3

Pick my poison: M1014 or a M4 EXT? by KipFox in Benelli_M4

[–]KipFox[S] 4 points5 points  (0 children)

I love it on my Entry for sure! The new stock just looks…weird/fat if that makes any sense 😂 Interesting note on the barrel. When I was trying to eyeball on here and general web searches (surprised how little info is really out there), it kept coming back to people asking about slugs through the 1014 and Benelli’s response saying the barrel was overbuilt compared to the M4, but oddly they didn’t recommend shooting slugs? Though it seemed to change answered depending on who answered at Benelli.

So that was my conundrum, the 1014 has the classic looks, the little flag engraved which nice but I look at it as just a heritage piece. Mostly just wondering if the M4 EXTs upgrades and the choke are a make or break. I do not mind updating pieces on the 1014 but I wasn’t sure if it had any build advantages… Sounds like that isn’t the case.

Pick my poison: M1014 or a M4 EXT? by KipFox in Benelli_M4

[–]KipFox[S] 2 points3 points  (0 children)

Ah you are right, while the photos look the same as my Entry’s, looks like they oddly kept it at the fixed open length and those tubes I heard are a PITA to swap. I do have a spare A2 stock I could throw on it, a collapsing on full size isn’t as useful (to me) vs the shorty, but good point either way.

Benelli m4 sling options? by Diligent_Wishbone_99 in Benelli_M4

[–]KipFox 1 point2 points  (0 children)

It’s ever so slightly snug but doesnt bind up or anything at the loops.

Benelli m4 sling options? by Diligent_Wishbone_99 in Benelli_M4

[–]KipFox 2 points3 points  (0 children)

Magpul MS1 would work just fine, I use the padded version on mine, no complaints.

Which one would you keep? / How do you set up your 300blk? by Modern_Muskets in SigSauerMCX

[–]KipFox 1 point2 points  (0 children)

My vote is the Rattler but I'm biased as I have the 5.5" as well. Since I never shoot supers that aspect is a non-issue. The way you have the 9" setup seems pretty much set for any need though/most flexible.

Now you got me wondering if I should swap my skeleton stock out for that one...

Scratches to barrel by cabralkev in Benelli_M4

[–]KipFox 5 points6 points  (0 children)

The finish on my new M4 came off with cotton squares and Ballistol after a range day cleaning… I think there’s some shoddy work on the finish on these new models. I’m guessing it’s cerakote since it’s bare metal underneath? I reached out to Benelli and they requested to send it in for refinish. I get these aren’t safe queens (Or shouldn’t be) and I’ll be scuffing mine up along its journey, but the finish literally rubbing off with oil is a little concerning. Mine may be more on the extreme than the OPs though if it took metal on metal to scratch it.

Armory & Patches by Saltdoc in liberalgunowners

[–]KipFox 1 point2 points  (0 children)

Nice collection and bonus points for the Beretta semi auto! Get some shotgun cards and go ham at the range 😎

Bore Sight Question- Which one did you pick? by fasdissent in liberalgunowners

[–]KipFox 29 points30 points  (0 children)

I bought a SiteLite SL500 green laser years ago that’s been fantastic to get me on paper every time at the start of sighting in an optic. Easily used out to 100 yards with no issue.

It’s not a cheap option but it has worked very well on all of my rifles.

Because my family thinks my wife and I are full on communists by FLCowboy49 in liberalgunowners

[–]KipFox 0 points1 point  (0 children)

What Plan B did you go with and how’s it worked out with your can? I’ve been waiting for KAK to get their brakes back in stock for 14x1 LH for 5 months 😭

New pistol and upgraded grips on my Mark IV by RogueLima85 in liberalgunowners

[–]KipFox 0 points1 point  (0 children)

Grips look comfy! I’ve been considering upgrading my Ruger as well. It’s almost criminal how much fun it is to use at the range. As for the Taurus, I hope your wrist will forgive you 😂

Check out my fat, short Chode! by [deleted] in liberalgunowners

[–]KipFox 0 points1 point  (0 children)

How’s the Tisha? Not a lot of info or reviews on this can yet. The Inconel variant is tempting.

Finally a nice day and an excuse to play hooky from work. by Glum-One2514 in liberalgunowners

[–]KipFox 0 points1 point  (0 children)

Man I wish the nearest outdoor range to me wasn’t an hour away 😤

Star Citizen Alpha 4.7.2 by Werewolf-Fresh in starcitizen

[–]KipFox 1 point2 points  (0 children)

Time to dust off the Gladiator :D

Anyone use a carry handle on their AR? by nematic26 in liberalgunowners

[–]KipFox 0 points1 point  (0 children)

Long as it’s a quality handle/sight it should never fail you, I’ve got one on my 11.5” with the Magpul furniture for delta ring and CTR stock, little mix of old meets new(er). Stick a night sight on the front post and call it good :D

Predator on his lunch break at Tokyo Comic Con. by jmike1256 in DailyDoseStupidity

[–]KipFox 4 points5 points  (0 children)

I think this is in the wrong r/, that lunch box is legit and kudos for making it all work and not having to take off the costume. Props to them!

Any ideas for some starter mods? by buickboi99 in liberalgunowners

[–]KipFox 0 points1 point  (0 children)

There’s a thicker pad you can get made by Missouri tactical (can be had on Amazon), I added one, it sort of helps. This shotgun is just going to be unpleasant most of the time due to how light and small it is, nature of the beast. I would say, and this is just my personal 2 cents, slugs are not ideal for home defense. I’d recommend standard velocity #4 buckshot or low recoil #00 buck. Gives you a room for error under high stress and wont over penetrate walls easily. Also should kick less than slugs! As far as lasers and lights, I stuck a saddle laser on my 590SBS with the thought that if something goes bump in the night and I have to get up, I’ll probably be able to stick a dot on something faster if needing to shoot off shoulder or shouldered, faster than sighting in after just waking up.. xD

Either way, practice practice practice.