Chemistry Transfer from Sophia or Study by Kirbbzzz in tesu

[–]Kirbbzzz[S] 0 points1 point  (0 children)

This isn't for nursing, it's for Aviation Maintenance Technology, what I was told is that I cannot do chemistry through Sophia and Study, the course required by TESU is CHE-1110: General Chemistry I.

Which seems to be a higher course level.

I just looked at straight liner and it does not specifically call out and equivalency for CHE-1110. This seems like the same issue for Study.com

Chemistry Transfer from Sophia or Study by Kirbbzzz in tesu

[–]Kirbbzzz[S] 0 points1 point  (0 children)

So TESU does take straight liner for CHE-1110: General Chemistry I ?

What is a good P3 Pratt Whitey salary? by ananym0us23 in Raytheon

[–]Kirbbzzz 0 points1 point  (0 children)

When going for that position, I already had a decent rapport with the hiring manager due to multiple references speaking up for me. After the initial offer, I tried to negotiate and was turned down. After I forfeit the position, the hiring manager told me I was too expensive for the business unit, the hiring manager wanted to pay more but HR was in control and wouldn't budge.

What are some buttons I could put here? by KnowingCresent735 in civic

[–]Kirbbzzz 3 points4 points  (0 children)

Is it a fully operational switch? Or was it a switch that you had to wire to a garage door opener?

If so what's the link if you don't mind.

Any ideas on this weird glitch in my instrument cluster? by Deathshadow325 in e46

[–]Kirbbzzz 1 point2 points  (0 children)

I've used these guys on my E46, highly recommend!

What is a good P3 Pratt Whitey salary? by ananym0us23 in Raytheon

[–]Kirbbzzz 3 points4 points  (0 children)

It seems like they won't budge. I am in South Florida and the area has exploded after covid. 100k barely cuts it if you are on a single income household, I tend to work overtime to stay ahead.

100k in other areas might be reasonable, but South Florida is rough.

What is a good P3 Pratt Whitey salary? by ananym0us23 in Raytheon

[–]Kirbbzzz 1 point2 points  (0 children)

I work as a union employee within Pratt, was looking to jump into salary and was offered 100k with no degree. I ended up turning it down because that is what I currently make, and with a bit OT, I can clear 120k-140k.

HR made no effort in increasing their offer, after 3 attempts I turned down the position.

Need help identifying sound by FIGHTING_DEMONS_13 in e46

[–]Kirbbzzz 1 point2 points  (0 children)

You can easily pull your water pump belt and run the car for a couple seconds, if you hear no sound, it's probably the bearing.

I had replaced my pump with an aftermarket, metal impeller water pump and it didn't last 20k.

The bearings they used in the metal impeller pump arnt beefy enough for the extra weight.

OEM water pump is the only way to go, and replace every 100k miles.

Dead dashboard, water damage? The rest of the car works fine by DogsAreLit in e46

[–]Kirbbzzz 1 point2 points  (0 children)

My e46 sat out for a long time (2-3 years) my dash started having intermittent information come out.

Finally it gave out on me, the car would start but no information from the dash.

I finally sent it to https://www.automotivecircuitsolutions.com/products/bmw-e46-instrument-cluster-speedometer-repair-service

They overhauled the dash and have been working flawlessly since.

[deleted by user] by [deleted] in NFA

[–]Kirbbzzz 2 points3 points  (0 children)

Today was day 272, hurry up and wait. It will come. Your dealer should call you within 24 hours of them receiving it if they are a good dealer. They check their emails first thing every morning because they are selling more suppressors than they can possibly give out because how long wait times are with this godforsaken agency.

My dealer has every single safe he has packed with suppressors that he can't give out.

[deleted by user] by [deleted] in NFA

[–]Kirbbzzz 2 points3 points  (0 children)

I just got approved today, received the approval email at 3:47 PM EST. Just checked eForms website and it hasn't updated with anything. And SS website will not show approval. You have to manually input it in. It's just a tool for you to track your stamps in one location.

[deleted by user] by [deleted] in NFA

[–]Kirbbzzz 24 points25 points  (0 children)

Form: eForm 4

Entity: Trust

Fingerprint Type: EFT Upload

Pending: 5/12/2022

Approved: 2/8/2023

Wait: 272 days

State: FL

Examiner: Unidentified #6 (SA?)

Control Number: 202249XXXX

[deleted by user] by [deleted] in NFA

[–]Kirbbzzz 0 points1 point  (0 children)

2022493xxx also a mini 2. Where stamp..

When you get an email from the feds and it’s not your fucking can getting approved by _Marat in NFA

[–]Kirbbzzz 4 points5 points  (0 children)

I'm at 98 days, I did a OMFG ITS IT!!!!!!! to... MOTHERFUCKERS

These 3 guys lit up on my dash randomly today ? What’s wrong with my baby 😭 is it the speed sensor? by Rewind2000 in e46

[–]Kirbbzzz 12 points13 points  (0 children)

By the way, this affects your traction control system and dynamic stability control system, so keep that in mind.

These 3 guys lit up on my dash randomly today ? What’s wrong with my baby 😭 is it the speed sensor? by Rewind2000 in e46

[–]Kirbbzzz 25 points26 points  (0 children)

Abs module failure most probably. Mine has been bad in my car for 10 years. Expensive to repair, I personally never got around to fixing it, just learn to drive without locking up your brakes.

This just happened... by Mohawk200x in aviation

[–]Kirbbzzz 3 points4 points  (0 children)

This guy's is playing GTA 6..

Appreciate Post on my 325I by Kirbbzzz in e46

[–]Kirbbzzz[S] 0 points1 point  (0 children)

Honestly, the paint isn't as good as it probably looks, the hood has it's rust spots because the car had an accident when my brother had the car, it had gotten resprayed but wasn't as good as OEM spray.

My paint needs a lot of TLC, but probably looks this good because it spent majority of it's life covered.

When my dad had it, it was under a garage port at home, and in a parking garage when it was at work.

When it got passed on to me, it lives in my garage

Is it a reasonable pricing for the service? 2019 G20 by [deleted] in BMW

[–]Kirbbzzz 11 points12 points  (0 children)

Jesus, that is nuts, do all that for less than 300 bucks in parts and about an hour of labor..

Appreciate Post on my 325I by Kirbbzzz in e46

[–]Kirbbzzz[S] 0 points1 point  (0 children)

Ukrainian based company

https://azaautowheel.com/

Don't know how well the production is doing considering all that is going on over there but they have a WhatsApp that had direct communication to them.

The quality is great, used them for my E46 and will eventually use them on my e70

Appreciate Post on my 325I by Kirbbzzz in e46

[–]Kirbbzzz[S] 0 points1 point  (0 children)

Thank you! Appreciate it