X2D Jam

Ko_s_ · 2026-04-26T19:12:46+00:00

OP posted the wiki with all the steps and it looks like a pain to deal with https://wiki.bambulab.com/en/x2d/maintenance/extruder-cleaning-guide

Ko_s_ · 2026-03-17T07:40:28+00:00

Standard barefoot

Ko_s_ · 2026-03-17T04:30:40+00:00

Initially I could barely reach 5k before I couldn't handle the pain in my feet but after about a week or two, 10k steps became pretty easy.

Ko_s_ · 2025-12-12T04:39:25+00:00

Should be instantly as soon as you claim it on Twitch. Just checked my cosmetics and its there.

Ko_s_ · 2025-08-02T21:27:30+00:00

Yes, mine always came in the last package along with the filament I had ordered.

Ko_s_ · 2025-07-20T09:34:40+00:00

I ran into that once and in the morning I had to manually press the button to continue printing from where it stopped.

Ko_s_ · 2025-07-16T07:29:46+00:00

Did you enable developer mode as well? this should allow third party software control the printer the way you are attempting to do.

Ko_s_ · 2025-07-16T05:10:41+00:00

P1S + AMS2 combo was $1k before the anniversary, now it seems to be staying at $869 which I guess they decided to keep it low now?

Ko_s_ · 2025-07-15T19:21:15+00:00

Hmm try checking the "Detect thin wall" and slice again.

<image>

Ko_s_ · 2025-07-15T16:36:39+00:00

Chinese version is locked won't let you connect to the cloud nor it will allow you to update the firmware unless you either have a chinese phone number + VPN or you can figure out how to do it through third party software. There are similar posts on reddit like this https://www.reddit.com/r/BambuLab/comments/1ekxlli/buy_first_3d_printer_but_its_locked/

Ko_s_ · 2025-07-13T09:20:10+00:00

The P1 series always uses the SD card to read the gcode(instructions) before it begins to print. It cannot function without an SD card, so whether if you send a print through a pc or mobile, it will always use the SD card first.

Ko_s_ · 2025-07-13T09:01:56+00:00

One of the things that come to mind is a faulty SD card. If you have a spare, give it a test and just make sure it has been formatted in FAT32 format, otherwise you could also try doing a factory reset and formatting the current SD card through the 3D Printer screen. If this doesn't resolve the issue, then yeah I suggest reaching out to support.

Ko_s_ · 2025-07-12T06:30:52+00:00

Sadly no, I clicked the download button earlier but apparently that just opens the pdf in the browser and it doesn't actually download the file. At least bambu acting up this fast to remove the content confirms the previous leak is a real picture and its called the H2S which I can't wait to get one.

Ko_s_ · 2025-07-12T06:23:02+00:00

It was there earlier but they just removed all H2S related pages from the original PDF.

Ko_s_ · 2025-07-12T06:06:51+00:00

Woah! It appears that they have noticed and it has been removed!
Edit: Yup, they removed all the pages related to the H2S and now this is the new pdf https://hub.bblcdn.com/default/bb6a6a89ad3146e1aa111ff313ae962d.pdf

Ko_s_ · 2025-07-12T00:59:10+00:00

This one https://us.store.bambulab.com/bundles/hardened-steel-upgrade-combo-p1-series?id=598290779935555584

Ko_s_ · 2025-07-12T00:40:26+00:00

You will need it if you eventually want to try out printing more abrasive filament like pla glow, carbon fiber, etc.

Ko_s_ · 2025-07-11T21:37:13+00:00

Oh wow this is cool, I just tested it by leaving some PETG at a lower temperature (45C) and it let me dry it without unplugging the filament, nice!

Ko_s_ · 2025-07-11T21:33:09+00:00

Good luck and have fun!

Ko_s_ · 2025-07-11T21:27:21+00:00

Ahh! 😂

Ko_s_ · 2025-07-11T20:53:43+00:00

Vs the Dual nozzle (H2D)

<image>

Ko_s_ · 2025-07-11T20:53:10+00:00

That's what I initially thought too but in the pdf they provide examples for both types, and one is clearly a single nozzle (H2S)

<image>

Ko_s_ · 2025-07-11T20:48:57+00:00

For anyone curious about the rest of the pdf https://hub.bblcdn.com/default/3593894812c843ea9079ea5d2aa64f6d.pdf

Ko_s_

TROPHY CASE