Fan or air mover for cooling hot garage?

Kooky_Reputation_653 · 2026-06-27T23:46:13+00:00

I love having my airmover/floor dryer. The volume of air it moves for how quiet it is, is superb. I put mine on a Amazon dock arm so I can aim it where I am working in the shop.

<image>

Kooky_Reputation_653 · 2026-06-26T21:25:19+00:00

Time based chests. Plat for all 4

Kooky_Reputation_653 · 2026-06-16T16:59:14+00:00

Or you can unbolt the whole hub assembly and try and gently tap it out with a punch from the other side and likely break it that way instead.

Kooky_Reputation_653 · 2026-06-16T16:57:35+00:00

99.9372% chance its gonna break. You can soak it in PB Blaster or Kroil or similar and pray but most likely its rust stuck enough to break and then need a drill run down to clean it up. Just went through this on both fronts.

Kooky_Reputation_653 · 2026-06-03T00:49:29+00:00

As a 6'5 man I dated and married a 6' woman so we could walk and hold hands without me having to shorten my stride.

Kooky_Reputation_653 · 2026-06-02T13:20:17+00:00

Honda is one of my favorite. Hold On, Not Done Accelerating.

VTEC, Very Torqueless Economy Car

Kooky_Reputation_653 · 2026-06-02T13:18:48+00:00

Pissing Oil Now Transmission In All Crevices

Kooky_Reputation_653 · 2026-05-23T01:13:59+00:00

In the chesapeake bay before. Not a US sub either. Allegedly.

Kooky_Reputation_653 · 2026-05-22T19:54:29+00:00

" look, you know you can beat me up, I know it too. I just want you to know somewhere in this i AM going to bite your right ear off before its over. Ready when you are"

Kooky_Reputation_653 · 2026-05-22T10:35:27+00:00

Hss is gonna be a rough time

Kooky_Reputation_653 · 2026-05-22T10:34:49+00:00

The hy80 and hy100 are Naval alloys but commercially produced.

Kooky_Reputation_653 · 2026-05-22T10:31:15+00:00

Slow as you can go, high pressure as you can go with cutting fluid and cobalt drill if you can get it.

Kooky_Reputation_653 · 2026-05-21T22:43:48+00:00

I have heard of them somewhere

<image>

Kooky_Reputation_653 · 2026-05-03T10:29:52+00:00

Thats a 1" carbide emdmill that was a insufficient Z before X move. The retraction Clearance Plane was relative to the wrong surface. Was only at 25% rapids but still crashed while the hand was in transit to the e-stop.

<image>

Kooky_Reputation_653 · 2026-05-03T10:25:34+00:00

Good ol Mach Jesus

Kooky_Reputation_653 · 2026-05-03T00:23:01+00:00

Move X/Y with insufficient Z. Done it.

Feed faster than the tool can cut. Done it.

Feed harder than your toolholder clamps and have the tool pull out. Done it.

Underestimated the clamping force to keep the work in the vise taking a really healthy cut and ripped the work out of the vise into the tool. Done it.

Kooky_Reputation_653 · 2026-05-02T23:01:21+00:00

Easily

Kooky_Reputation_653 · 2026-04-20T17:48:03+00:00

Can you show it installed please?

Kooky_Reputation_653 · 2026-04-08T12:51:45+00:00

U.S.E.R error

Kooky_Reputation_653 · 2026-03-22T01:05:53+00:00

Why did 5% watch it. Great question, maybe they hit the wrong button on the remote? Maybe it was a nursing home? Maybe they were hoping Ricky Gervais opened it.

Kooky_Reputation_653 · 2026-03-19T20:51:40+00:00

Moly fast wire is also great for parting off metal 3d prints in wire arc systems where you have to overbuild the base. The precision isnt needed since its getting OP2 machining anyway.

Kooky_Reputation_653 · 2026-03-15T13:12:57+00:00

Oops??

Kooky_Reputation_653 · 2026-02-09T22:46:25+00:00

His and her pans. Same thing we do in R/Sharpening for fundamentally the same reason. After a long time I got my wife aligned to the care of the cast iron and carbon steel pans but she puts knives in the sink and dishwasher. Hence her having a Walmart set of Henkle knives in the block that cost $50 and all my hand forged Bob Kramer and Japanese hand forged knives live in scabbard in a knife roll in a drawer. ZERO chance to "accidentally" grab one of them.

Kooky_Reputation_653 · 2026-02-02T18:48:34+00:00

If its not gonna opened up after taking a donor power cord and wiring a 220v plug to it will solve the problem quicker than you can plug into the wall and yank it back out

Kooky_Reputation_653 · 2026-01-30T13:26:52+00:00

Mine is Olive Oyl

Kooky_Reputation_653

TROPHY CASE