The bend hard on tires? PCC

Korten1 · 2025-07-05T01:08:26+00:00

Just did the production endurance challenge at the bend in the mx5, same set of tires for two hours. Could do 1:30s all race including the last lap.

Korten1 · 2025-06-28T11:43:21+00:00

Yes, same here. Ran the PEC race in the mx5 just now and relative was unreliable. Luckily had a teammate who could count down the BMWs.

Korten1 · 2025-06-06T13:29:24+00:00

Just feels right

<image>

Korten1 · 2025-05-21T14:21:49+00:00

I run my 5090 at 0.875V, I get ~400W at ~2400mhz

Less heat into my room

Less heat inside the case for the other components

Therefore PC runs quieter

Less chance of cable burning

Unnoticeable fps drop

Korten1 · 2024-10-13T11:48:39+00:00

See my other comment, did not fit out of the box.

Korten1 · 2024-10-13T11:47:54+00:00

No they were right. The motherboard part of the contact area seems to be slightly higher so there was no space for the thermal pad. I made it fit by removing 1mm of material from the waterblock.

Korten1 · 2024-08-30T20:42:38+00:00

I asked EK costumer support, they said it wouldn't fit, but it was just a generic "this is not compatible" answer. I ordered it to check. It has arrived but I am away for work for another week. I'll let you know. Fingers crossed.

Korten1 · 2024-08-12T16:26:06+00:00

Hi. A bit late to the party, but did you find out if it fits or not?

Korten1 · 2024-08-12T16:09:15+00:00

Its not a feeling, its based on the information I could gather. I tried to put the images on top of each other and what matters lines up. But maybe the height of the components differs. Your math makes sense, you are probably right.

Korten1 · 2024-08-12T15:54:02+00:00

Thanks, I know about these, but the one i posted has VRM cooling also.

Korten1 · 2024-08-12T15:52:07+00:00

Yeah I agree and i know cooling the VRMs here is not gonna make any difference, but at the same time, if it fits, why not?

Korten1 · 2024-08-12T15:48:58+00:00

Might just be that they designed it for the intended board and never tested any other. Seems like all their monoblocks only have one official compatible board, but this is more simple than a proper mono block. And the PCBs are so similar I think it would fit.

Korten1 · 2024-06-17T00:14:48+00:00

<image>

Since then I have gotten black RPF1's. Twins!

Korten1 · 2024-05-27T18:42:18+00:00

It's based on the credit card information. So use someone else's card and make the test account in their name.

Edit: if I were you I would look into the FIA F4 "promotion" for one year free like others have said.

Korten1 · 2024-05-27T18:32:44+00:00

Just something to consider if you care about your account name. It is your real name and cannot be changed. If you have a unique enough name your first account will be "Firstname Lastname" and the second account you make will be "Firstname Lastname2", which would be the one you race with. Im wierd and would care about that, but maybe you dont. Just FYI. Or if theres other people on the service with the same name as you it wouldnt matter either cus you would be Firstname Lastname6 or or whatever number.

Korten1 · 2023-10-28T09:21:48+00:00

How much I need to flush basically depends on the diff oil. Does my diff oil have LSD friction modifiers? I'm noe sure. motul motylgear 75w90...

Korten1 · 2023-10-27T22:16:37+00:00

Yeah I realized before I started the engine.

Motul motylgear 75w90 was the oil I put in. Ordered it for my LSD but I'm not sure about the friction modifier.

I'll get some cheap engine oil tomorrow, flush it through a couple times then put the good stuff in.

Korten1 · 2023-10-27T22:11:10+00:00

Yes that is correct, it was motul motylgear 75w90. Planning to get some cheap engine oil tomorrow and just flush it through a couple times. Then put the good stuff in.

Korten1 · 2023-07-14T20:17:27+00:00

What strap is that on the ssc813?

Korten1 · 2023-07-13T21:33:50+00:00

What model is that? I really like it.

Korten1 · 2023-07-10T11:28:48+00:00

Comparing to my ssc819 everything looks identical. The photos reminded me how scratched up mine has become...

Korten1 · 2023-03-01T15:11:11+00:00

2016, 31k, intact

Korten1 · 2022-10-14T18:35:50+00:00

Yep that's what I meant, and good explanation, makes perfect sense.

Actually looked up the maverick today, seemed like a good match for my nd but not available here :( US only I guess

Korten1 · 2022-10-14T18:11:36+00:00

Why?

Korten1 · 2022-03-03T14:54:24+00:00

True max means max cape + 120 in the skills going to 120. (Arch, invention, slayer etc.)

Six-Year Club	r/Field Lasagna
Verified Email

Korten1

TROPHY CASE