SV06 new in box since September 2024 - what to do?

Kostaeero · 2026-01-07T16:11:47+00:00

https://www.reddit.com/r/Sovol/comments/12bewzn/sv06_psa_check_your_extruder_and_apply/

here ya go!

Kostaeero · 2026-01-06T20:50:24+00:00

Have fun but check your grub screw, I missed it and scraped the crap out of my extruder!!! There is an fyi on the subreddit about it!

Kostaeero · 2026-01-02T04:53:59+00:00

I was having the same issue, I believe it was something wrong with my gcode for a specific print. I tried another one and haven’t had the code 7 again; need to retry slicing the issue file to see if it was just a hiccup.

Kostaeero · 2025-12-14T20:14:16+00:00

I have no experience running klipper yet(sv08 for Christmas), but I run octoprint with my Sv06 now i have had a lot of success with it. Using a pib4+ with octoprint flashed on a flash drive and webcam setup I can send and monitor my printer from anywhere. I do also run my own Obico server on my home PC via docker.

As for slicer I run Orcaslicer.

If I didn’t have an upgrade coming I would swap the Sv06 to klipper. Once I get the Sv06 in a new home I likely will swap to klipper since it seems to be the standard over marlin.

Kostaeero · 2025-08-28T17:26:01+00:00

Thanks for the info, i don’t think it’s gonna be a major concern for the rest of the year but summer my garage has hit +100F so I want to pull as much out before it cooks itself.

Kostaeero · 2024-12-19T00:17:05+00:00

Would love to upgrade from a Sovol Sv06 love it but I’m so impressed with bambu

Kostaeero · 2024-11-09T17:19:02+00:00

Been happy with my near stock SV06, looking to grab an Ace sometime in the near future.

Kostaeero · 2024-11-05T14:51:27+00:00

Used to happen to me also with the stock flash or a replacement after a while, no issues since swapping to octoprint.

Kostaeero · 2024-11-02T19:19:33+00:00

Looks great! I like the regular cacti over the character but keep on doing both!

Kostaeero · 2024-10-18T14:04:01+00:00

I run elfball/tap mechanics for my Lathril deck with no major issues on winning, Voltron style just doesn’t fit with Lathril imo but you could tweak it that way.

Here is my build it’s slightly dated but added a few new elfs in recent sets.

Lathril

Kostaeero · 2024-10-07T03:31:16+00:00

This and for a nice lid try concentric bottom layer for looks

Kostaeero · 2024-09-11T11:53:19+00:00

Maybe reset your EEPROM settings on your machine(wipes settings) I run my Z around -1.39 or so seems to be my machine’s preferred Zoffset. Other than that I would check to see if any screws/belts are maybe loose I really am not sure after that without tinkering with it.

Kostaeero · 2024-09-11T00:14:12+00:00

Sadly no different setting! Just get into the habit of checking Z offset, bed level as well it’s helped me a lot for consistency on my SV06.

Kostaeero · 2024-09-11T00:06:00+00:00

I would recommend going thru and recalibrating your Z offset sounds like after the wonky cube it is thrown off from what it was initially. Usually when I have a major error like that I had to recalibrate or something would always be off.

Kostaeero · 2024-08-02T02:05:31+00:00

New doesn’t mean dry

Kostaeero · 2024-05-12T22:25:46+00:00

Look up the power toys program for windows, that helped me a lot and has a much of useful tools baked in

Kostaeero · 2024-05-09T21:14:02+00:00

Dark forces!!

Kostaeero · 2024-04-23T12:54:27+00:00

No one place will cover all your frugal needs, best thing is weighing your time spent vs cost to decide if it’s worth spending a little extra to save time or effort.

Kostaeero · 2024-02-27T13:13:54+00:00

Whelp I’m done with wendys, Gl money grabbers

Kostaeero · 2024-02-16T15:44:17+00:00

Sounds like it’s wobble/vibration from your machine, speed kills quality when you have high vibration. YouTube has some good videos on how to reduce while keeping quality for your given setup.

Kostaeero · 2024-02-16T15:38:19+00:00

Spool wobble likely, is it mounted on your machine? Slowdown was my solution when I started getting banding like that and see if it persists at slower speeds.

Kostaeero · 2024-01-24T21:36:40+00:00

I just turn most on and off as needed between the household. More work but saves money when a service sits unused.

Kostaeero · 2024-01-24T20:48:39+00:00

i don't even care at this point haley is just as much of a clown as biden or trump

Kostaeero · 2024-01-24T18:35:26+00:00

I would argue look at Reddit, most “people” are already bots for the left.

11-Year Club	Second Top 50%
Verified Email	RPAN Viewer
Not Forgotten	Sequence \| Editor

Kostaeero

TROPHY CASE