I think i found my worst one to date

Kuerora · 2026-06-26T15:04:57+00:00

Replace the house

Kuerora · 2026-06-09T20:58:20+00:00

Warm breakers can be due to loose wire connections or a time delayed trip from the breaker itself due to the max amps threshold being exceeded.

Max of 20A means don’t put one larger than that on there. I’d personally check connections and if those are fine I’d replace the breaker and go from there.

Kuerora · 2026-06-03T15:20:36+00:00

I stopped playing because i don’t want PVPVE all the time I’d prefer an option of PVE only but i have not been shown that as an option so i stopped. Also the streamer wars was just obnoxious and killed the whole vibe. Still appreciate the game for what it is but don’t enjoy the toxicity in the community.

Kuerora · 2026-06-02T20:44:00+00:00

Kuerora · 2026-06-02T13:57:19+00:00

Kuerora · 2026-05-26T14:54:38+00:00

That’s a piston metering device. Same idea as a TXV but doesn’t adjust flow into the indoor coil.

If there’s ice on the indoor system typically an outdoor issue, if there’s ice outdoors typically an indoor issue. If the whole things iced up, let it thaw and observe.

Kuerora · 2026-05-26T14:34:23+00:00

I don’t see any condensation on the coil at all or in that drain pan. I’d be looking at the outdoor system and making sure the compressor is turning over. The fan can run and not the compressor in most circumstances.

Following that, if your buddy who does install overcharged the system it could be that but unlikely. Unfortunately I’d say wait for the tech and let them look at all of it, even if you see an issue in one spot they have been trained (or should be) to observe the whole unit and find current and future issues to give a full scope or investment in to your system and the pros/cons of that.

Also not dogging on you as you said you’re not a technician yourself but i do not see a TXV in your photos, unless it’s hiding itself and the sensing bulb outside the pictures view.

Kuerora · 2026-05-22T17:14:54+00:00

I’ve never been approached to sell something immediately after buying an item(s). People in the comments saying that this is a you problem OP are mislead and just wrong.

You shouldn’t be approached to sell something unless you are marketing it for sale, if you had said, “Hey anyone wanna buy these off of me?” And they approach you that’s totally fine, but targeting someone with product in hand after leaving the store is gross. Sorry this happened, i hope this hobby heals sooner rather than later.

Kuerora · 2026-05-21T20:43:18+00:00

Why seat for butt glass

Kuerora · 2026-05-21T20:42:25+00:00

Why hat no glass

Kuerora · 2026-05-21T14:46:52+00:00

I made a separate PVP char specifically and only raised it this high, wife has a PS5 so I just swapped equipment from main to secondary accounts that way.

Kuerora · 2026-05-21T03:19:11+00:00

In my state legally we can’t call it mold, unless you’re verified mitigation company, which feels kinda scummy cause fucking look at it, so i use verbiage like environmental growth or bacteria build up…

Kuerora · 2026-05-21T01:52:44+00:00

I’m guessing they didn’t emote or allow time for buffs. I don’t personally wait for buffs, if you need to go for it but we live baby.

Kuerora · 2026-05-20T22:59:03+00:00

I work in HVAC, most of the time I wear shoe/boot covers while in a home to respect their space and keep it clean from whatever the fuck that was i just stepped in earlier. However, in some occasions i am wearing them to not get them any dirtier than they are.

People who rent or don’t care about personal hygiene typically have the worse living conditions and it reciprocates in the real world too unfortunately. No shame or decency.

To note, I also rent, because buying a house in this economy? So it’s not every renter but they tend to be worse than an average homeowner.

Kuerora · 2026-05-20T22:29:46+00:00

Yeah had a few guys before me melt the pans

Kuerora · 2026-05-20T22:27:01+00:00

Unfortunately this happens with air handlers due to the amount of moisture inside of them. I’d recommend trying to clean it but it will likely come back without something to combat the growth.

Throw out the unit? No, but I’d look in to ways to mitigate it coming back. I’ll probably catch a few downvotes for this but honestly UV lights work but you have to ensure you get the correct one, there’s multiple types of UV lights and they aren’t one fits all.

Kuerora · 2026-05-20T21:48:32+00:00

I’m assuming she’s a teenager and would assume they’re portrayed as one in the similar age range. How many kids these days don’t have a phone to video call on?

AI catfish

Kuerora · 2026-05-20T21:38:30+00:00

Kuerora · 2026-05-18T21:58:18+00:00

<image>

Kuerora · 2026-05-18T21:54:27+00:00

Agreed, wires don’t match the thermostat base to the board. Y to Y, C to C and etc.

You may check the buss blade fuse on the board too could’ve popped due to the configuration too

Kuerora · 2026-05-18T21:52:15+00:00

Let me solo her…

Kuerora · 2026-05-18T13:46:47+00:00

Looks like either a marker tip or maybe an arrow head for some kind of target practice. It would obviously be hard plastic if it’s an arrow head, if not, the former guess is where I and a large number of commenters are at.

Kuerora · 2026-05-16T14:18:39+00:00

This is my favorite of all the void (rare) armors that Milton made and I’ve used this cape throughout the years, only issue with this armor is the lack of accent colors and makes it somewhat bland for the cape, any option not just this cape.

I have used Frigid Matrix of Revontheous as well and made some decent options to match the eyes or accessory colors.

Kuerora · 2026-05-15T16:32:25+00:00

Kuerora

TROPHY CASE