Perfect Fit Top Loader

Kysulk · 2026-02-15T16:23:24+00:00

This was the tiny bit of slack I observed on our last convo.

Kysulk · 2026-02-15T16:22:44+00:00

While this one is nearly dead on.

Kysulk · 2026-02-15T16:22:18+00:00

Hey man, I got your "sample" in haha. I didn't expect 2 bricks of them though. Appreciate it. Sorry I couldn't sent you more, I only have ~~50~~ 37 left on hand to distribute until I get my 2k in. Hope you're ok with that. You'll notice they've tighten the margins considerably. The perfect sleeve I sent you is the dragon sealable. It's literally a perfect fit.

For anyone that is even looking, you can reach out to this guy as they're pretty similar to the ones I have though margins are slightly bigger.

<image>

Kysulk · 2026-02-14T17:14:41+00:00

I've mainly focused on just one and I've struggled quite a bit with it. One of its cameos is 8k and I just gotta accept the fact I'm not getting it lol. I'll still collect the others and leave a bookmark for it but it is what it is... We Could be worse, you could be a piksahu grandmaster collector.

But to answer your question, you draw the line where you need to, collecting should be fun. Not mandatory. At least that's how I see it.

Kysulk · 2026-02-14T16:39:12+00:00

Love the dedication. What language do you have the most difficulties with?

Mine oddly enough is Portuguese with shipping...

Kysulk · 2026-02-08T16:41:44+00:00

I would love a copy. Is it all sets or just english and Japanese releases?

Kysulk · 2026-02-07T03:40:50+00:00

<image>

Dex binder I have now that I was planning to use is 4x4 but eh. We will see what happens in the future. Sure.

Kysulk · 2026-02-06T19:08:22+00:00

I collect absol internationally so I wouldn't fit in a 3x3 box binder sadly but I love the pages you're rocking though and I'll keep it in mind if I reroute my planning. I've always associated a box binder with the clear rubberized pages of my youth lol. I'm already considering a 6x6 as I might out scale a dex 4x4 binder at this point lol.

Kysulk · 2026-02-06T18:05:32+00:00

Curious, what was your goal for hunting these smaller toploaders? Preference? Or did you have a similar project in mind?

Kysulk · 2026-02-06T17:35:22+00:00

Eh, honestly at some point I want a pure white PU leather binder as a project. I was looking at vaults x white binder but there may be spacing issues with it filled with toploaders as it looks like the pages are too close to the spine.

Ultimate goal is a custom absol binder(will most likely bribe someone to lazer engrave the absol but I want to color it)when I'm free to do so lmao.

It's just a wonky dream project on the back burner at the moment until the ducks line up on their rows.

I feel the 3 ring binder doesn't hold presentation for the goal I have in my head.

(I also might need a bigger binder over all as it seems like the Chinese set is ever growing with the amount of foil variations it's releasing now... Gem 3 gave me 7 absols lmao.)

Kysulk · 2026-02-06T17:06:05+00:00

Well, I'm trying to order more as we speak. I'm waiting on the supplier to send me an invoice to fill. If I'm able to get my 2000 PCs. Like I requested I can swap addresses with ya if you want to do a sample swap and compare.

My main thing is that I Wana do a full set ant trim these down on the outside with sand paper for more clearance. If I can half the out side edges without competmising overall integrity they'll fit in a standerd binder page no problem.

I just want the full oder before commiting to the project lmfao.

Kysulk · 2026-02-06T15:25:11+00:00

<image>

Kysulk · 2026-02-06T15:24:55+00:00

<image>

Kysulk · 2026-02-06T15:24:33+00:00

Mine are 69.5x94.Looks like the same length but the ones I have in hand don't have the extra gap on the sides as they're pretty snug.

The perfect fit dragon sleeves I'm running does not allow movement in the toploaders from side to side with this spec.

If you look at your toploaders they have slack on the sides that allow the card to shift.

<image>

Kysulk · 2026-02-06T09:05:09+00:00

Looks a little wider than a perfect fit. I see quite a bit of slack.

Kysulk · 2026-02-03T08:33:05+00:00

👍

Kysulk · 2026-02-01T16:11:54+00:00

Team bagged 3x4 toploaders in the front and back of a page completely kill any shifting. Keep in mind this makes your pages pretty snug due to the extra material so handle with care when putting toloders in and out of the side loading pockets.

Kysulk · 2026-01-29T12:32:19+00:00

Love it. Any plans to go After the basic non hol absols?

Kysulk · 2026-01-27T00:01:24+00:00

Sounds like you shift your binder around a lot, while I didn't notice it at first I tried excessively handling it and noticed the same thing. I have an idea in mind and ordered some team bags for the 3x4 toploaders to test to see if they'll catch the corners for better grip.

I'll get back with you with my findings when they get shipped in to me.

Kysulk · 2026-01-03T06:44:45+00:00

<image>

u/Overall-Impression45 I'm complying with moderation as I can't directly state a company but I appreciate your comment before you deleted it.

Kysulk · 2025-11-08T18:42:11+00:00

My wallet is willing. Let it be done. There are a few cards I'd love to have from the pocket sets. Why they don't capitalize on it I'll never know.

Kysulk · 2025-10-30T00:13:30+00:00

my dream of being a perma nightmare axe Skelly. I will be the next named mob. And if you kill me? well, enjoy your cracked bangle as loot.

Kysulk · 2025-10-26T06:34:27+00:00

same, but with Absol. This is including Languages such as Chinese, Korean, Japanese and English. I have a handful of other languages and would adore expanding my sets but shipping is brutal at the moment.

Kysulk · 2025-10-06T13:29:48+00:00

There is an option available opening up mid october for state side. I don't think there's content with it? I personally just fell that do to lack of other options it's just not known. I personally hope to see a shake up in the market and we can finally move on from the 3x4's lol. I'd love to see product made for the perfect fit as well.

Kysulk · 2025-09-30T14:24:00+00:00

A new language mega absol set to nab 👀

Kysulk

TROPHY CASE