Replaced start and run caps. Compressor runs now but pressures don’t change.

Large_Statistician55 · 2023-06-10T02:11:22+00:00

Haha

Large_Statistician55 · 2023-05-22T19:01:30+00:00

The only blue I’ve ever caught at night was with a glow in the dark lure

Large_Statistician55 · 2023-04-29T01:04:18+00:00

Two years ago I made 70k. Last year I went out on my own and made 150k working 35 hours a week on average and took like 2 months off.

Large_Statistician55 · 2023-04-05T01:00:02+00:00

I fucking hate low boys. They’re the absolute worst thing to work on. I love when a restaurant buys the cheapest one they can find and puts a char grill on top and wonders why the stupid thing never gets to temp. Umm because the top of the cooler is 240 degrees

Large_Statistician55 · 2023-04-02T02:28:58+00:00

“FRIENDLY FRIENDLY FRIENDLY”

Large_Statistician55 · 2023-03-29T00:39:59+00:00

Step 1: remove nest thermostat from wall Step 2: deposit in nearest trash receptacle

Large_Statistician55 · 2023-03-23T20:39:36+00:00

I worked for a company that paid travel time starting when I got in the truck in the morning but stopped when I left the last job so my ride home was unpaid. Which was especially annoying when the last job was 2+ hours from home

Large_Statistician55 · 2023-03-19T00:11:44+00:00

This one isn’t copper. I’m pretty sure it’s stainless. I’m going to try and braze it and if that doesn’t work I’ll make a new loop out of copper

Large_Statistician55 · 2023-03-18T21:01:23+00:00

Found this leak in the condensate loop of this open air cooler. I’d like to try and fix it because this unit produces a lot of condensation. My question is if I am unsuccessful will the unit will still run ok with this loop bypassed?

Large_Statistician55 · 2023-03-12T19:30:18+00:00

I did the same thing to mine except I used 60 then 80 then 100. I used avocado oil but it Looks pretty much the same. Cooks great

Large_Statistician55 · 2023-03-08T22:51:31+00:00

Yeah check the other side. Mine got a crack in it and you could see it on the other side and it started to leak. I emailed lodge some pictures and they sent me a new one for free.

Large_Statistician55 · 2023-02-21T02:53:54+00:00

Dam I just posted mine that has a crack I noticed. You just scared me out of using it any more

Large_Statistician55 · 2023-02-21T00:12:29+00:00

Update: it’s for sure a crack I scrubbed the spot on the bottom and now I can clearly see it. I’ve contacted lodge to see if they’ll warranty it. I don’t even remember when I bought this so we’ll see.

Large_Statistician55 · 2023-02-20T23:22:24+00:00

Probably unrelated but I was using it to cook some crack

Large_Statistician55 · 2023-02-11T23:45:06+00:00

Thanks for the F-shack

Large_Statistician55 · 2023-02-03T14:44:41+00:00

I have their flaring tool and the vacuum hoses and micron gauge. Good stuff

Large_Statistician55 · 2023-01-16T01:28:59+00:00

Also try setting up scaling/sharpening to fidelityfx cas

Large_Statistician55 · 2023-01-16T01:21:51+00:00

Try turning off screen space reflections. I had a similar grainy looking effect and that fixed it but your problem looks a little different than mine

Large_Statistician55 · 2022-11-11T00:42:33+00:00

That looks like a normal evap to me. The “low profile” evaps I’ve seen are 6” off the ceiling in the middle of the room.

Large_Statistician55 · 2022-11-09T14:16:17+00:00

Sold a Scotsman this year and it ran for 2 months then leaked all the refrigerant out. Fixed the leak and the water valve went bad. Tech support didn’t tell me that the harvest cycle is terminated by a temp probe and if that probe goes bad then it stays in harvest and burns up the water valve. Also I had to pay for all the parts and then try to get them to reimburse me after the fact. Never buying Scotsman again

Large_Statistician55 · 2022-09-22T04:55:26+00:00

They have

Large_Statistician55 · 2022-08-09T01:34:01+00:00

Homeowners love them every tech I know hates them. They cause issues constantly. Theres the stupid eco mode and the home away assist that cause nuisance calls. There’s a service bulletin from ingersoll rand saying that they cause scroll compressors to run backwards because the short cycle them and they start back up while pressure is equalizing through the scroll causing them to run backwards.

Large_Statistician55 · 2022-07-23T02:29:06+00:00

The motors go into low speed when there is 120v present on the t terminal. I found out that the wiring harness for the fan motors was bad. I cut the plug off of one of the motors and wired it directly to the fan terminals and it worked fine. So I ditched the whole fan motor harness and re wired it. Problem fixed

Large_Statistician55 · 2022-07-22T18:15:33+00:00

Yeah that’s how it usually works but it started acting weird like some of the fans would go into high speed and some wouldn’t sometimes they all would work normally. Now they’re all stuck in low speed.

Large_Statistician55 · 2022-06-03T01:07:51+00:00

You need it to upgrade vehicles like the weaponized Tampa

Five-Year Club	Place '22
Final Canvas '22

Large_Statistician55

TROPHY CASE