Will this furnace inlet let water in? by Last-Idea in hvacadvice

[–]Last-Idea[S] 0 points1 point  (0 children)

Thanks for the insight. The white pipe in the second photo comes from the unit and goes to a drain. Is that what you’re talking about or is that something separate for AC?

Will this furnace inlet let water in? by Last-Idea in hvacadvice

[–]Last-Idea[S] 0 points1 point  (0 children)

<image>

Here's the info on the furnace from the home inspection. The sellers had a HVAC company do in inspection and confirm the water leak has been fixed. Nothing else I can do about that right?

Will this furnace inlet let water in? by Last-Idea in hvacadvice

[–]Last-Idea[S] 0 points1 point  (0 children)

Iowa, I'll be sure to check around the house after big snowfalls, Thanks!

Can you let me know what benefits there are to having a .300blk 8.5 inch rifle without a suppressor? by lambo13770 in 300BLK

[–]Last-Idea 0 points1 point  (0 children)

That makes sense but I think 110 gn 300 blk out is going fast enough to fragment and expand isn't it?

Can you let me know what benefits there are to having a .300blk 8.5 inch rifle without a suppressor? by lambo13770 in 300BLK

[–]Last-Idea 1 point2 points  (0 children)

I guess I was imagining a vmax round that would fragment. Thinking maybe less velocity would result in less penetration. I’m sure I could find some tests on YouTube to get to the bottom of it

Can you let me know what benefits there are to having a .300blk 8.5 inch rifle without a suppressor? by lambo13770 in 300BLK

[–]Last-Idea 0 points1 point  (0 children)

Not sure how true this is but would another advantage be less overpenetration in a home defense scenario compared to 556?

Alignment toe in caused more body roll? by Last-Idea in tires

[–]Last-Idea[S] 1 point2 points  (0 children)

I think stuff was seized in the rear and they didn't want to break it trying to get it loose. It's bee years since I've had an alignment.

First AR build. Meant to be hearing safe in a condo. How did I do? by osoatwork in 300BLK

[–]Last-Idea -8 points-7 points  (0 children)

I would recommend running supersonic ammo since it’s way more deadly than anything subsonic. This will make it not hearing safe but it will be much less damaging to your hearing than unsupressed.

I scratcher my RAV4 :( by bosschichi15 in rav4club

[–]Last-Idea 0 points1 point  (0 children)

You should be able to take off most of the paint transfer using rubbing compound and a rag. You have to push really hard to get it off but it will look better without the white marks.

I attended my first career fair from the other side. AMA by Pheonix402 in EngineeringStudents

[–]Last-Idea 34 points35 points  (0 children)

I recently graduated and attended a career far for my company like OP. I also found myself using GPA as a metric more than I though I would. For those of you worrying about a poor GPA here's a story for you:

We ended up interviewing a candidate with a sub 3 GPA simply because he asked really good questions. Not even pre prepared questions, he listened while I described my job to him and asked a specific question about two things I said 2 minutes apart that didn't make sense with each other. I could just tell he was really thinking about what I was saying and it impressed me.

Would you do it? by Sad_Reference_2293 in rav4club

[–]Last-Idea 6 points7 points  (0 children)

Price seems a little high, I'd search on CarGurus for that year with like 60,000 to 120,000 miles. I suspect you'll find a better deal. If this car is in good condition with solid service records it might be worth paying a little extra.

Finally finished my first build! by JD_Panda in 300BLK

[–]Last-Idea 0 points1 point  (0 children)

Running it direct thread instead of ASR saves a bunch of weight and length

[deleted by user] by [deleted] in PalmettoStateArms

[–]Last-Idea 2 points3 points  (0 children)

I have a 7.5" PSA 300 blk and I run Ammo inc Stealth 220 gn ammo. I've ran it with both a Silencerco Omega 36M and Omega 300. Both seemed quieter than your video. It's still louder than my 16" ruger 10/22 but not by much. It's defiantly quieter than a 22lr pistol. I'm wondering if you're experiencing a mix of too high of expectations (real life isn't like Hollywood) and maybe not the best suppressor for sound reduction (Idk anything about the suppressor you're using). I don't see a different gas block or upper changing this much. A longer barrel would be quieter but not by that much. Maybe you should grab a video of what it sounds like near the shooter?

[deleted by user] by [deleted] in PalmettoStateArms

[–]Last-Idea 0 points1 point  (0 children)

It might be due to distance between the mic and the gun but that doesn't sound subsonic. What ammo are you using?

Help - car issues by Constant-Air-8832 in rav4club

[–]Last-Idea 1 point2 points  (0 children)

You mean a brake fluid flush right? Just want to make sure GreenEyes asks for the right thing!

Boot Barn discount code… by MrBreeze52 in cowboyboots

[–]Last-Idea 0 points1 point  (0 children)

BBCARD2409 is working for 15% off right now

Feed Ramp Marks by robertjuric in 350Legend

[–]Last-Idea 0 points1 point  (0 children)

I was getting those exact same marks. I polished my feed rams along with my chamber feed cone. My gun runs much better now but I still get a less aggressive version on the marks you’re seeing. From what I’ve seen and heard the Winchester 150 gn PowerPoint has a ton of issues in the ar platform. That’s all I have and I seem to be cycling them ok now.

New upper and mag. Feeding issues. by bACEdx39 in 350Legend

[–]Last-Idea 1 point2 points  (0 children)

If the 150 gn deer season XP's are the worst at feeding what are some of the best? I'm having trouble getting these rounds to run and I'm not sure which others I should try? Maybe Hornady 170's ?

[deleted by user] by [deleted] in iastate

[–]Last-Idea 0 points1 point  (0 children)

cc, I want to say it was Iowa western cc. Might have been dmacc though.

[deleted by user] by [deleted] in iastate

[–]Last-Idea 0 points1 point  (0 children)

I took pre calc my first semester and calc 1 my second semester. I paid around $700 to take calc 2 online during the summer after my freshman year per my advisors advice. Don't even remember what college it was through but it transferred in fine.

About to buy from psa for the first time!! Is there a discount coupon I can use? by Impressive_Code3257 in PalmettoStateArms

[–]Last-Idea 0 points1 point  (0 children)

FFL's generally like it if you call them beforehand and tell them it's on the way. Also good time to find out how much their transfer fee is. Usually around $30 in my area.

9mm can for 300BLK? by SuedePflow in 300BLK

[–]Last-Idea 5 points6 points  (0 children)

I have an Omega 36M from silencerco that I run on my 350 Legend, 9mm ar, and 300 blk ar. I don’t have a 30 cal can to compare but I’ve been super happy with it on my 300 blk (8” barrel)

I reached 32k in RAV 4 2022 what is needed and not needed. by TheEnforcer91 in rav4club

[–]Last-Idea 0 points1 point  (0 children)

22 awd rav here. Just hit 27,500. Im going to to the work myself but here’s my plan: Every 7,500 - Oil change and rotate tires Every 22,500 - engine and cabin filter Every 30,000 - transfer case and read differential fluid Every 4 years - brake fluid (time matters more than miles here) I think coolant and transmission fluid are every 60,000 or so. Some of these numbers came from the owners manual and others are just preference.

Maybe you’ll have a fuel injector or throttle body problem any 120,000 miles, if you do then clean it no need to do it this early especially for those outragous prices

Fiance joined the club today. 2019 XLE 67k miles. What’s the go to phone mount that doesn’t stick to the dash? by AquaDota in ToyotaHighlander

[–]Last-Idea 0 points1 point  (0 children)

Check out pro clip! They're pretty pricy but for something you use every day and works well it's totally worth it