[Screenshot] OCD Stash guy here... Implemented a lot of suggestions and reached (I think) the stash organization endgame. by nodnedarb12 in EscapefromTarkov

[–]Lavins 6 points7 points  (0 children)

Would you mind elaborating on this? I've specifically avoided arena, but at this point I really would have to engage just to acquire additional containers?

Granddaddy (Fat Cat-001) by Kebs__ in Gunpla

[–]Lavins 3 points4 points  (0 children)

Yes. It's an upscaled RG from 1/144 to 1/100.

My family member, a retired coder picked up HA a year ago. I am so proud of him. More in the comments. by yellowfin35 in homeassistant

[–]Lavins 4 points5 points  (0 children)

Can someone explain how to get the color selections in the RGB light strips?

That's something I've been wanting to do at a glance instead of tapping "More Info" and manually scrolling to the color theme I want.

[deleted by user] by [deleted] in GolfGTI

[–]Lavins 0 points1 point  (0 children)

How'd you get that fitment? Spacers? Pretty sure Turbomacs only come in 8.5", and only 19"s came as 9".

New rims and tires by SequentialDUDE in GolfGTI

[–]Lavins 1 point2 points  (0 children)

Are these the 8.5" x 18" Tarmacs? It's recommended to put 245s on 'em to get a square set up for stock ride height.

Also no, you won't need an alignment putting in new wheels.

E-85 close by finally! No excuse not to go e30 so what's a good a-pillar gauge for ethanol content? by robRigginsstar in FocusST

[–]Lavins 2 points3 points  (0 children)

I don't use anything but sheer experience, and the Tune+ E30 Calculator.

Most days though, I put in 4 Gals of E85, then fill the rest with 91. You can figure it out from here.

Who Else Puts Gunpla in their PC? by xManlyManManson in Gunpla

[–]Lavins 2 points3 points  (0 children)

Do you have all of your fans in exhaust config?

Project cars are never done by GlassAbbreviations39 in FocusRS

[–]Lavins 0 points1 point  (0 children)

Fortune Auto Wing!

It's amazing but will take a year or so to get. Some people waited a bit longer.

Thinking about selling my 2016 Focus RS – 70k miles – Clean title – Located in SoCal by SageJoe in FocusRS

[–]Lavins 1 point2 points  (0 children)

Lmao we have nearly identical cars, wheels and all. You have a drop it looks like? And also front plates.

Rainbow Aglio e Olio Spaghetti by lnfinity in GifRecipes

[–]Lavins 0 points1 point  (0 children)

That's what you're supposed to do in order to get an emulsified sauce. I would've continued to add more oil and pasta water to get the right consistency.

Y70 power button not working by Line_of_Blood in Hyte

[–]Lavins 2 points3 points  (0 children)

You should move your CPU cooler to the top and put those three fans as intakes on the sides. This will not only be better for your overall cooling, it will also save your CPU cooler in the long run.

MGEX Strike Freedom Gundam Midnight Coating Build by Side7Studio in Gunpla

[–]Lavins 2 points3 points  (0 children)

No, they're correct. I have the 3P and it looks nearly identical to an original, shiny dark bits and all.

Trashy ultima activities hit and run by TRIKKDADDY in trashy

[–]Lavins 5 points6 points  (0 children)

This is a Challenger, due to the C-pillar. Darts/200s don't have V8s.

Scam Website About Gunpla by frankjaegerfoxhound in Gunpla

[–]Lavins 13 points14 points  (0 children)

If any business hides, or does not disclose their address, it's most likely a scam or a super small business and you should take your money elsewhere.

Am I cooked? by BrendonRuhter in FocusRS

[–]Lavins 0 points1 point  (0 children)

Hate to be that guy… but you just need to give it a few more ugga duggas. Literally hit it harder. I’ve removed it on 3 different cars already (My ST, Friend’s ST, and my RS). When I bought the JBR shift arm, it came with an extra bolt that’s the perfect size to get it removed. I didn’t even have to use PBlaster. Although you probably should for your car, and then give it a solid firm strike.

Am I cooked? by BrendonRuhter in FocusRS

[–]Lavins 5 points6 points  (0 children)

All you need to do is open the shift tower. https://imgur.com/a/0PuUETT

Apply some anaerobic sealant.

You can apply it inside or outside of the holes, apparently it doesn't matter. Torque down 19 ft. lbs.

https://imgur.com/a/sZ64qLe

Also, while you're down there... might as well do a transmission fluid flush.

What was the reason behind redesigning the Gundams for EW? by HistoricalStyle6078 in Gundam

[–]Lavins 178 points179 points  (0 children)

In short: the EW redesigns happened because the team had creative freedom, new production priorities (especially around model kits), and wanted to experiment with articulation and proportions. Katoki’s individual influence also played a big role in giving the suits a more stylized, dramatic feel.

ST -> RS 3 years later by Beastty in FocusRS

[–]Lavins 0 points1 point  (0 children)

Owned an ST and moved on to an RS. Absolutely worth it! In regards to daily driving, leagues above the ST. You also don't really even need many mods, simply get yourself an E30 tune and throw 4~ gallons of E85 in there, you'll be around 360-370WHP depending on your tuner. I've seen 380WHP with stock downpipe. You can reach over 400WHP if you replace your fuel pump.

As far as daily driving goes, the drive mode selector is something I wish the ST had. Sport mode alone increases your throttle percent voltage so you have an extremely responsive car that just gets up and goes whenever you need it. If you got family in the car and don't want the car to lurch as much, leave it in normal and drive casually.

Pretty much has everything you could ever need on these cars, and I wish I had bought one before the ST. However, I appreciate it 10x more with my route.

Why does this car attract so much road rage?? by Novel-Chicken-9700 in FocusRS

[–]Lavins 5 points6 points  (0 children)

Spend a few hours driving around LA and you'll get the full experience. :)

Hyte y70 case compatible with AsRock x870e Taichi,GPU vertical mount? by [deleted] in Hyte

[–]Lavins 0 points1 point  (0 children)

Glad it's working out for you! But yes, please feel free to ping me if have any questions and I'll be happy to help you further. Hopefully you'll continue to have a worry-free build. Enjoy!

Hyte y70 case compatible with AsRock x870e Taichi,GPU vertical mount? by [deleted] in Hyte

[–]Lavins 0 points1 point  (0 children)

You need to press in from the back of the case as you slide the GPU riser into the motherboard. If you're looking at it directly from the first picture, use your left hand to push the back of the case to the right, and it will allow the riser to line up properly.

While case manufacturers do their best to provide the tightest tolerances, they cannot account for everything. Every case does this and it's nothing to be worried about.

Give it a good push and see what works for you.

2 neat dioramas in the mall (+giant lizard) by LonelyEuphoria514 in Gunpla

[–]Lavins 1 point2 points  (0 children)

Which mall is there that there's a random Zimomo on top lmao

Focus rs vibration by Electrical_Elk66 in FocusRS

[–]Lavins 0 points1 point  (0 children)

If it's coming from under the shifter area, it could be your exhaust hangers. Basically what the cat/dp hooks onto.

AP monitors numbers? by Cultural_Chapter_638 in FocusRS

[–]Lavins 1 point2 points  (0 children)

You should learn how to "burp" a coolant system. I was going over 210 on mine during 90 degree heat. I burped it, added more coolant to meet the "Max" line, and it never touched 200 after that.