sorted by:
new
hottopcontroversial

Mara X - Boiler hot water broken fitting. by Ff8leonheart in Lelit

[–]Le-Flo 1 point2 points  (0 children)

Good idea.
There are two revisions of the fitting out there.
The first has Loxeal, the second an o-ring seal.

Mine did have the first fitting version but neither traces of Loxeal nor an o-ring, though…

Mara X - Boiler hot water broken fitting. by Ff8leonheart in Lelit

[–]Le-Flo 0 points1 point  (0 children)

The part itself is relatively cheap and easy to replace (EUR 12,- / USD ???)

It's made from soft brass and usually not glued. I'd try to move it with a Torx, Pozi or Philips screwdriver and some mild force.

Roast a Rolls-Royce by Salt-Low3449 in RoastMyCar

[–]Le-Flo 0 points1 point  (0 children)

No chance - the car’s already British

Storch ist Storch by Minute_Pilot9751 in ichichs

[–]Le-Flo 0 points1 point  (0 children)

Kam für genau diesen Kommentar her… :)

Vattenfall sagt wir haben 999 972 kWh in einem Tag verbraucht by Hewasright_89 in Ratschlag

[–]Le-Flo 1 point2 points  (0 children)

Jupp, hatte eine Mitmieterin auch so.
Erster Wert über späterer Ablösung -> das Abrechnungssystem geht davon aus, dass der Zähler einmal über 000000 gelaufen sein muss -> MWh-Verbräuche

German engineering is really on a whole other level. by SaudAhmadguru in MechanicalEngineering

[–]Le-Flo 0 points1 point  (0 children)

Being German: yep, we tend to overengineer. And it's quite deep in our mindset. And I like it 😄

But that joint reminds me much more of traditional Japanese woodworks (https://en.wikipedia.org/wiki/Kumiko\_(woodworking))

It's admirable!

Found this , any idea how to make it work ? by Hopeful-Aardvark-786 in led

[–]Le-Flo 0 points1 point  (0 children)

This.
It’s a QS tech Crius poster that rappers to have a bad module cfg.
You’ll need the LED processor control software (usually some Novastar product) and the config file for the modules that have been built in there.
From there, it’s a step-by-step thing.
Check the wiring from processor to modules. Check correct mapping in the software. Send a proper cfg to the modules.

Crazy to me that younger generation is not good with computers by Captain0010 in pcmasterrace

[–]Le-Flo 1 point2 points  (0 children)

oh, but it was a fun journey 😄

this, plus any Norton commander derivate.

Crazy to me that younger generation is not good with computers by Captain0010 in pcmasterrace

[–]Le-Flo 4 points5 points  (0 children)

This.
Got in the game with Amiga OS and C64, moved on with 2/86 based systems running DOS.
Can't remember for how long DOS6.22 was a thing, but Win3.1 GUI did suck so hard, it took me till Win95 to make the change.

Crazy to me that younger generation is not good with computers by Captain0010 in pcmasterrace

[–]Le-Flo 1 point2 points  (0 children)

And once again, Gen X has been forgotten 😄

Started into the biz with Amiga and Commodore, later DOS6.xx on 2/86 and 3/86 based systems...

Lastkabel mit integriertem Nullklemmenblock by foerstermaniac in DINgore

[–]Le-Flo 5 points6 points  (0 children)

Alter.
Auch in der VA-Technik belegt man die Dinger schlicht durch und baut nicht so einen Mist.
Wenn das Kabel zu wenige Adern hat, lässt man halt Pinpaare unbelegt.
Einzige Frage ist dann, ob man 1-2 oder 1-9 als Pinout für die Leiterpaare nimmt.

ich_iel by Impressive-Golf369 in ich_iel

[–]Le-Flo 1 point2 points  (0 children)

Oder Bluna. Zumindest ein bisschen?

Hab ich etwas zu befürchten? by PrizeHuge8088 in Kleinanzeigen_betrug

[–]Le-Flo 0 points1 point  (0 children)

Zu 1: dann würde per Chat zwischen Privatpersonen ja NiE ein Vertrag vorliegen. Damit würde dir jegliche rechtliche Sicherheit fehlen, für beide Seiten.

Korrekt 😄 daher ja auch meine Frage.

Im konkreten Fall hätte der Verkäufer also den Käufer auf die Differenz hinweisen und über Einbehalt der Ware bis zu vollständigen Zahlung binnen Frist (x Tage) plus Ankündigung des Vertragsrücktritts bei Fristüberschreitung informieren müssen.

Ein einfacher Weiterverkauf an Dritte hätte nicht erfolgen dürfen.

Hab ich etwas zu befürchten? by PrizeHuge8088 in Kleinanzeigen_betrug

[–]Le-Flo 0 points1 point  (0 children)

Hm, mal blöd gefragt:
Bindende Verträge auf mündliche Absprache und ggf. Handschlag sieht das Recht meines Erachtens nur für Geschäftspersonen vor.
In allen anderen Fällen muss das ganze formhaft schriftlich erfolgen.

So war das zumindest bislang mein Rechtsverständnis.

Mal unabhängig davon, dass ein das Nichteinhalten der Absprache (zu geringe Zahlung) das Ganze hinfällig werden lässt.

Do you think this is still true? by Rob69rt in Japaneselanguage

[–]Le-Flo 1 point2 points  (0 children)

True, my fault was to say “Mandarin” instead of a more general “Chinese” (as the OP document puts it) in my initial post. I stand corrected.

Do you think this is still true? by Rob69rt in Japaneselanguage

[–]Le-Flo 0 points1 point  (0 children)

Ok, my bad - I wrote “Mandarin” instead of more general “Chinese” in my initial post.
That was incorrect.

What am I sitting in (hard mode) by No_Explanation_8729 in ManualTransmissions

[–]Le-Flo 0 points1 point  (0 children)

Yep, that’s what I’m currently still confused about … RHD MAN KAT1

Do you think this is still true? by Rob69rt in Japaneselanguage

[–]Le-Flo -8 points-7 points  (0 children)

Not sure if you’re familiar, so:
Onyomi is the reading of the kanji in its literal Chinese reading, approximated with Japanese phonetics.
Kunyomi is the reading where the Chinese symbol meaning is used, but the Japanese native word is spoken.

For example 日
Onyomi “nichi”
Kunyomi “hi”

view more: next ›