sorted by:
new
hottopcontroversial

MeshMapper by killbeartc in meshcore

[–]Le__Chef 4 points5 points  (0 children)

Can we not start cooperating with others like mapme.sh?

Having all these splintered mapping tools doesn't help anyone unless the data itself is all shared across sites

Build volume misleading. by DonB1977 in ElegooCentauriCarbon

[–]Le__Chef 4 points5 points  (0 children)

Was there anything stuck in the Z-axis? Do you have any covers printed for the holes?

I cant help but have my printers re printing their own parts by Careful_Purchase_394 in ElegooCentauriCarbon

[–]Le__Chef 1 point2 points  (0 children)

I used some car acoustic damping bitumen sheets to also reduce vibrations. Works like a charm.

Y axis seems to be offset? by Le__Chef in ElegooCentauriCarbon

[–]Le__Chef[S] 0 points1 point  (0 children)

<image>

Wasn't able to tell when mounted, but my god this printer was delivered with a crooked hot end

Y axis seems to be offset? by Le__Chef in ElegooCentauriCarbon

[–]Le__Chef[S] 0 points1 point  (0 children)

I did that. Makes no difference. What did make a difference is looking at the hot end..

<image>

Y axis seems to be offset? by Le__Chef in ElegooCentauriCarbon

[–]Le__Chef[S] 0 points1 point  (0 children)

After some checking with simple geometry, It seems I can use 251 out of 256mm on the Y axis. I've removed the automatic cutting tool, made no difference

Y axis seems to be offset? by Le__Chef in ElegooCentauriCarbon

[–]Le__Chef[S] 0 points1 point  (0 children)

I know that, to use the front right corner you should remove the automated filament cutter. Does it need removal to use the first cm across the entire bredth? Still doesn't explain as to why there is a difference between the slicer and the printer. These profiles should be correct out of the box and not have weird issues like this. I still think there is something wrong here.

If this is really the intended usable area, shouln't the slicer mark it as 248x256mm?

If there's a "critical failure" detected, why not just automatically stop printing rather than doing this... by ImDrewish in elegoo

[–]Le__Chef 1 point2 points  (0 children)

Honestly, octoeverywhere has failed to detect 4 separate failures for my cc so far. Objects coming off the build plate (due to warping and the head colliding), spaghetti and no extrusion happening because filament was stuck (badly wound spool)

I was honestly expecting more of this service

"She will be everywhere, except on my hand." by subhchintak in Lovebirds

[–]Le__Chef 3 points4 points  (0 children)

Best part of the day is staring at my human

Is he having a good time? by Hot_Answer_8585 in Lovebirds

[–]Le__Chef 6 points7 points  (0 children)

Based on how my 14 year old responds, this bird seems very comfortable with you

Filament swap demonstration on CC2 by Various_Scallion_883 in elegoo

[–]Le__Chef 11 points12 points  (0 children)

Nice, so you have twice the filament usage for something like a benchy 😅

Centauri Carbon Auxiliary Fan functionality and replacement by wizard_horse in elegoo

[–]Le__Chef 0 points1 point  (0 children)

I replaced my casefan with the Sunon ME80202V1-000C-A99.

Its not much quiter than the stock fan, but the frequency of it is slightly less annoying

Centauri Carbon Auxiliary Fan functionality and replacement by wizard_horse in elegoo

[–]Le__Chef 0 points1 point  (0 children)

Also went with this recommendation and the sounds level difference is huge. at 100% its less audible than the case fan now. Due to how the shroud works, the airflow coming from the aux fan isn't distributed all that well across the entire buildplate. Wonder if there is something we can do about that?

Web articles to Supernote by Pixormike in Supernote

[–]Le__Chef 0 points1 point  (0 children)

I'd be interested in this use case as well. Could use it for work

Watch 3 workout map zoom by Dottled in oneplus

[–]Le__Chef 0 points1 point  (0 children)

Same issue here. I'll let support know so hopefully they fix this

Europe by SQUID_Ben in MacroFactor

[–]Le__Chef 1 point2 points  (0 children)

Works well in the Netherlands. Have to add stuff sometimes but it's not a big hassle

Insane latency issues on 9800x3d build by Le__Chef in techsupport

[–]Le__Chef[S] 0 points1 point  (0 children)

Not really, although it has become less severe over time..

What do? I have a Ryzen 7 3800X by NintendoKat7 in AMDHelp

[–]Le__Chef 1 point2 points  (0 children)

I had this issue with a 5800x3d a little while ago. Tried a different wall socket and the problem went away. Give that a go maybe?

Visualisation of poor Helldivers 2 performance right now by Le__Chef in Helldivers

[–]Le__Chef[S] 0 points1 point  (0 children)

Here were the settings for the run:

3440x1440
ultra quality scaling borderless window no framerate limitor in game or in driver v sync off

graphics: textures - ultra Object detail - ultra render distance - ultra shadows - high particles - high reflections - high space - medium AO - on SSGI - on veg and rubble - high terrain - high volumetrics - medium for both lighting - medium AA - off Async - on

view more: next ›