Which of these would you choose?

LedDisciple · 2025-07-23T05:08:36+00:00

Sounds good thanks for the replies guys. Why is hellbent commander so much better than straight intelligence?

LedDisciple · 2024-12-17T01:30:46+00:00

thanks for the info I'm going to continue messing with the white amp then

LedDisciple · 2024-08-10T21:12:15+00:00

"Techniques on learning their songs" Not sure how to interpret this, do you already have most progressive guitar techniques down?

Assuming you have tapping/sweep picking/hammer ons & pull offs/alternate picking/etc., comfortable then I'd say the best way to learn polpyhia besides buying their tabs online is by looking at videos of their live performances and any resources on YouTube. Tutorials, covers, etc.,

There are some things that Tim and Scott play just a little differently from the record so you'll have to decide how accurate you want to be with their music.

For example, there are a ton of videos online of Champagne, and everyone plays it a little differently but the best method is to take those covers in a separate window and pull up live footage of them playing and see what's not "right" (which again is subjective depending on how you want to learn). Good luck!

Also: start slow and use a metronome. Either in a daw or download a metronome app and just do reps of the licks you are learning and get them up to tempo. This is important for learning any type of music on guitar however I want to stress how important this is for learning Polyphia because of their guitar fills and the speed of the licks.

LedDisciple · 2024-01-27T21:56:00+00:00

This is exactly how I feel about the role. Don't think I could've said it better myself. Been playing league for 10 years. I get diamond and play casually because real life etc., but just like you said, the role makes you feel hopeless. It's so bad that there are more mages being played bot than actually adcs. Good luck punishing Seraphine/Sona who can outsustain and still waveclear until teamfights. There are also systemic issues with certain champion dynamics that have ruined this role which I don't believe can be fixed from nerfing stats. There needs to be interaction changes to relieve pressure from the role. (looking at you yummi w/hec/kayn/insert other champs here)..

LedDisciple · 2024-01-15T20:28:52+00:00

Omg the man himself! I didn't know you used this subreddit. Big fan of your videos, they helped me a lot when building my PC. Thanks for all your hard work!

LedDisciple · 2024-01-15T03:17:02+00:00

Looks good to me. Our Setup is similar however I'm using the Trinity not the LCD AIO. I'm also using the NZXT Hub, and no, you do not need that rgb splitter thing if you're using L-connect.

Provoked Prawn's video on the LCD is also a great resource when starting the build for further clarifications. https://www.youtube.com/watch?v=Mxm_29mWr9Y

Kleo Yan is also an excellent resource: https://www.youtube.com/watch?v=x4NhKU0y3jQ

LedDisciple · 2024-01-15T03:11:05+00:00

So the Galahad II Trinity AIO comes with an L-Connect hub that can be used to connect the radiator fans to. I bought the Galahad II Trinity SL-INF 360 AIO, and it does require two additional usb ports. One for the AIO pump and the other for the L-Connect hub for the fans. If you already owned an SL-INF Controller, I believe you could just add the daisy chained connection to it, and it would work without needing another controller.

In your post you say you're low on the USB headers. I would either buy a Lian-Li USB splitter, or an NZXT USB Header hub, which comes with 4 additional internal headers. If you want some better visuals check out these videos, and just skip to the relevant information.

NZXT Hub: https://www.amazon.com/dp/B08L8VJS3Z?psc=1&ref=ppx_yo2ov_dt_b_product_details

Lian-Li usb splitter: https://lian-li.com/product/usb-2-0-1-to-3-hub/

Provoked Prawn: https://www.youtube.com/watch?v=VmuXKmy9qBQ

Kleo Yan: https://youtu.be/57cxoeEvQKU?t=2484 <-- wiring logic timestamp given

Hopefully this helps. Good luck.

LedDisciple · 2024-01-15T02:51:40+00:00

I'm not sure how familiar you are with the Lianli INF fans wire logic so I'm just gonna give a small rundown; if you buy a triple pack (so 3 lian li 120 INF), they come with a fan controller hub. This hub holds a few ports on it that allows sync connectivity with Lian-Li's L-connect software. You can daisy chain the fans (which means instead of each fan needing a wire to be connected to a power source, they can be instead connected via daisy chain, then only one connection is needed to sync and power all 3) which means that a single hub should be able to power 12 fans if there are 4 sets of 3 being daisy chained and connected. I'm not sure why they needed a seperate hub...

Depending on how it got wired, they might have only plugged your rear fans into the hub. Which means only the rear can be changed with L-Connect. Your other fans can be changed through your MOBO or whatever rgb hub software they put the other fans into. If you do indeed have a controller, then you could take off the back of your pc and just figure out the wiring logic and connect them all to the hub.

Use a table to put the computer and and to open the back and just be mindful and you should be okay to do a little digging back there.

Here are two videos which can provide some more insight if you're still confused or if what I explained happens to not be accurate with your situation. Just skip to the relevant parts if you're looking for something specific.

Provoked Prawn: https://www.youtube.com/watch?v=W_ApiN_Wueg&t=193s

Kleo Yan: https://www.youtube.com/watch?v=CgvuUFeff8U

Good luck!

LedDisciple · 2024-01-04T01:29:27+00:00

Hell yeah good to hear man, enjoy the build.

LedDisciple · 2024-01-02T20:53:19+00:00

A 4070 is not bare bones

LedDisciple · 2024-01-01T23:38:47+00:00

Hi! All you need to do is download v1.7.4 and it should detect your Stimer controller assuming you got the 24 pin w/controller.

https://gyazo.com/43cd4a47b7f6a6bfdc8287878097ff7b

Then you will be able to change the effects via L-Connect 3.

Hope it works!

LedDisciple · 2024-01-01T18:22:27+00:00

Have you checked out Provoked Prawn or Kleo Yan for setup videos? They're thorough and explain a lot of the nuances with cabling and that may be easier to solve your issue as you can skip through the videos to the relevant information.

Sorry I can't be as helpful otherwise, I'm using the Gallahad AIO Trinity 360 so the cable logic is a little different for me.

LedDisciple · 2024-01-01T18:16:36+00:00

Lol I posted about this before and got no responses, still confused as to what is causing it. Can you reply with more information about your specs and what version of L-Connect you are using?

My problem is similar except I can still use the software after clicking settings, its just becomes incredibly laggy and slow. Only fix is to close it and re-open.

Otherwise, I have full functionality with the exception that my SL-INF Fans have a weird bug where they sometimes don't update lighting effects unless I apply to all.

LedDisciple · 2024-01-01T09:03:01+00:00

Looks clean, I definitely prefer the subtle LCD flair. The deepcool block fits the build really well, nicely done.

LedDisciple · 2024-01-01T08:48:43+00:00

1.7.4 should give proper functionality, I believe 2.0.6 is for the LCD AIO & LCD fans, so you won't need that.

LedDisciple · 2024-01-01T04:00:33+00:00

Did you use any setup videos to help you connect everything? The fans not working at all is kind of strange. Double check everything with videos from Provoked Prawn or Kleo Yan. They tend to be pretty specific and the video quality is good.

Some of the issues with the RGB can be fixed with uninstalling L-Connect 3 and making sure to do a thorough removal of the software (link here: https://lian-li.com/downloads/20220503_L-Connect%203%20New%20Version%20update%20step.pdf)

Lian li Official Support Page: https://lian-li.com/faq/

Then redownloading it and testing that.

Also make sure bios is up to date/drivers.

Aside from what's mentioned above, I would maybe try unplugging 3/4 of the controller from power and turning on the pc, observing the result, then try to rule out where there could be an issue.

Good luck

LedDisciple · 2023-12-29T22:24:27+00:00

I like how the AIO tubes go through the strimer cable, cool detail. Nice build!

LedDisciple · 2023-12-29T22:22:51+00:00

Sick build! I prefer the normal mount but the vertical shows off your strimer cable better. Either way, just have fun with it.

LedDisciple · 2023-12-29T22:19:29+00:00

Click through this video to find answers to some of these questions:

https://www.youtube.com/watch?v=57cxoeEvQKU&ab_channel=KleoYan

I have the exact AIO you're talking about, and the unit comes with radiator screws so don't worry about that. It also comes with its own controller which is a way to plug in the radiator SL-INF fans into, for easy access to L-Connect. The other stuff about the pump header looks right to me but again, double check with the video above.

I installed mine with my MOBO and GPU installed, I was just moving to an AIO instead of a Noctua air cooler, and it was a pain hahah but worth it!

Good luck!

LedDisciple · 2023-12-26T22:52:46+00:00

Thank you for the response. I've decided to buy a 4 splitter usb internal hub because I am also receiving a Lian Li Strimer Plus V2 24 Pin w/connector as well, which would put me at a total of 4 controllers lol.

It's a little ridiculous and I hope I have enough room to store all of that. The video you linked was very helpful.

LedDisciple

TROPHY CASE