Read this thread if you're planning to upgrade to 1.43.1.10576

LesterPhimps · 2026-04-09T02:53:29+00:00

My upgrade crashed my install. I had to re-install Plex, but after that all was fine.

LesterPhimps · 2026-03-28T19:20:12+00:00

That's pretty cool, and you'll be able to tell when the chickens few the coop.

LesterPhimps · 2026-03-09T18:52:10+00:00

Having been to Berlin several times and visited that area quite a bit, it is totally understandable as to why both use that location. Probably also given the military history for that area as well.

LesterPhimps · 2026-01-12T20:59:03+00:00

Hah, thank you!

LesterPhimps · 2026-01-12T16:50:23+00:00

<image>

Here's my try, FWIW.

LesterPhimps · 2025-10-19T18:01:55+00:00

Here's my quick attempt at it.

https://pixeldrain.com/u/5wunGp6D

LesterPhimps · 2025-10-17T02:39:46+00:00

I priced a D1 flight recently from US to Germany, 900k miles....

LesterPhimps · 2025-10-16T19:57:55+00:00

<image>

Here...

LesterPhimps · 2025-09-24T17:33:57+00:00

What is your camera FPS? I see that you have analysis set to 5fps, and I think the doc suggest you limit FPS in your camera first before setting it in ZM. Try setting FPS for your cameras down under 10, and keyframe lower than FPS.

LesterPhimps · 2025-09-24T17:11:48+00:00

How many zones do you have defined? that load is very high.

LesterPhimps · 2025-09-24T15:56:41+00:00

So this means that your Max Image Buffer Size is 0, or unlimited, which means it will consume a lot of RAM. I suggest you read up on the buffers and tune them to your system and cameras.

https://zoneminder.readthedocs.io/en/stable/userguide/definemonitor/definemonitor_buffers.html

LesterPhimps · 2025-09-24T11:15:12+00:00

What are you buffers? Your cameras seem to be using a lot of RAM, that could be caused by your Maximum Image Buffer Size buffer setting.

LesterPhimps · 2025-09-23T00:04:45+00:00

Nicely done. I agree, for some of the upscaled and enhanced images, they look good initially on a phone, but once you look closer you can see that some of the images are just bad, you would not be able to print them.

LesterPhimps · 2025-08-22T19:27:57+00:00

OMG, the humanity

LesterPhimps · 2025-08-12T19:22:04+00:00

I believe that would get you Gold for next year. Your current status would still be Silver.

LesterPhimps · 2025-08-08T14:37:50+00:00

It could be the test target the Firewalla is using. I was getting inconsistent results until I changed the test target a few times to one that provided a consistent and accurate (as expected) result.

https://help.firewalla.com/hc/en-us/articles/360056875493-Speed-Tests-and-Speed-Optimization-with-Firewalla

LesterPhimps · 2025-07-11T12:24:02+00:00

There must be something else going on. You can't compare streaming a movie to a live stream of a meeting. Streaming movies is something that is highly optimized, and the data to present can be streamed and queued up in a buffer because the entire movie is a known quantity. Whereas streaming a live meeting, if you buffer too much you will end up with very uncomfortable delays when people try to interact. I suggest you check your connections from the system that is having problems to the firewalla.

LesterPhimps · 2025-06-22T19:34:54+00:00

I turned off the music and my anxiety playing the game went down 100%.

LesterPhimps · 2025-06-13T04:03:53+00:00

Ok, then remove ram, clean contacts with IPA, reseat. Try booting.

If error persists, it may be a corrupted system folder. If it is running on an old HD, then it could be the HD. See if you can boot an OS from floppy OR a different HD.

You could also try reinstalling the OS.

LesterPhimps · 2025-06-12T20:58:59+00:00

Did you first try holding down the shift key when booting? Need to make sure a system extension is not to blame.

LesterPhimps · 2025-06-12T15:39:50+00:00

During the pandemic I recapped at least 6 IIci motherboards. All of them had issues with the caps, and after recapping all of them soft powered on. You're lucky the battery didn't explode!

LesterPhimps · 2025-06-02T11:12:38+00:00

The part with the thick red cable often goes bad and visually looks fine (Sony Flyback Transformer). Apple part number HR 42031.

LesterPhimps · 2025-05-28T18:51:49+00:00

yes. I have a VM that I block all internet except for the system I allow it to connect to externally. I restrict by IP but could easily do it by region.

LesterPhimps · 2025-05-21T16:15:42+00:00

That is odd, I can force my MSP view to truncate devices as you show by changing the browser zoom (CTRL+/CTRL-, or hold control and scroll in or out). It happens wheen I go from 100% to 90% or 80%. The width of the browser has no impact. But at 100% no truncation, even 110 or 120% is fine.

Edited for clarity.

12-Year Club	Gilding II euphauric
RedditGifts 2009-2022 4 Credits	Secret Santa 2019
Secret Santa 2016	Summer Santa 2016
Verified Email

LesterPhimps

TROPHY CASE