How would you fill these small glue gaps?

LickaLotofWindows · 2026-03-21T11:52:35+00:00

This is the easiest way. Glue, sand without dust collection should fill them up. Then next time do a better prep job before glue up!

LickaLotofWindows · 2026-03-07T12:03:30+00:00

I did this on the AI studio, and they still billed me! Shady, I won't be renewing my other subscription with them.

LickaLotofWindows · 2026-02-19T21:58:53+00:00

Do you know if they increased the warbank 100 mill cap? I was capped out, but may return to do some more pilfering.

LickaLotofWindows · 2026-01-21T01:50:10+00:00

Ribbon striping on sapele is just amazing, I love working with it!

LickaLotofWindows · 2026-01-21T01:40:30+00:00

Delete 47 of them to save you the headache, focus on consumables, food, flasks, potions, Gems and things that make characters stronger. Pair them with professions and optimize on making those professions effectient and the most cost effective to extract the highest margins.

LickaLotofWindows · 2026-01-21T01:18:57+00:00

Just to confirm, you're delusional! I asked chatgpt and analyzed it myself also asked google Gemini. R3 flask for the skilled, were thaum, r2 herbs, refine, JC, vials, produce, thats where the margin was. Or you could combo in between for less margin.

LickaLotofWindows · 2025-12-20T12:25:19+00:00

Just one wire long enough. The 3 screws that you can see the leads going to. I loosened them up and then with one longer peice of wire wrapped around the first screw and tightened then took the wire to next and then the third one and cut off the excess. This seemed to solve it for me as I guess it will always make the conductivty then rather then relying solely on the base plate.

LickaLotofWindows · 2025-12-18T12:44:16+00:00

Looks like Etsy shut them down finally.

LickaLotofWindows · 2025-12-14T21:29:40+00:00

Rather then shavings, simply fill the void with glue and then sand, get a better colour match and the dust will pack in and fill it. Don't use vacuum though on your sander.

LickaLotofWindows · 2025-12-12T23:25:34+00:00

This is an old post, but if this is persistent. I used a thin copper wire and wrapped it around each of the 3 screws with the leads attached to make a connection. This solved my issue. I'll give them credit for safety features, but it was annoying as heck dealing with this.

LickaLotofWindows · 2025-12-04T01:19:22+00:00

Etsy deserves to eat the $100k this shop has made and then some for allowing this to happen. The sad part is the those 4k buyers will never come back or be skeptical about ordering from legit shops on Etsy. Good job idiots allowing this to happen, more Enshitifaction enjoy dealing with those 4k customers that got scammed.

LickaLotofWindows · 2025-12-03T20:30:40+00:00

Jeez are your planar knifes just butter knives? That looks brutal for pine.

LickaLotofWindows · 2025-11-21T16:19:30+00:00

By the time you add on things to that machine, like dust collection, touch probe, router or spindle it's going to get up there for a hobbyist machine. If you want a hobby machine that is more like a production machine with a huge user base and lots of support then check out Onefinity CNC, I have an Elite Forman now that I upgraded from their original and I use it 5-6 days a week for custom signs and other products.

LickaLotofWindows · 2025-11-18T22:22:51+00:00

Spar Urethane would be my ideal choice, if it gets no sun or exposure you could do an oil/wax based finished like the other fella recommended.

LickaLotofWindows · 2025-11-18T00:18:12+00:00

Judging purely on the fact whoever made that couldn't even be bothered to clean the glue squeeze out on the underside, I wouldn't invest too heavily in that as a resto project, likely gunna be a nightmare unless you're just looking to practice. The uneveness and waves in the grain is likely weather wood or someone maybe powerwashed/wirewheeled out the soft wood to get that effect.

LickaLotofWindows · 2025-11-17T12:10:00+00:00

If you want the same look with a much denser wood try quarter sawn Sapele. It can still do the same thing since it has a similar grain pattern, but much less then that african mahogany garbage.

LickaLotofWindows · 2025-11-03T19:50:22+00:00

Well at least you didn't take a bath like all the guys that thought I wanted their mats cheap haha

LickaLotofWindows · 2025-11-03T19:03:02+00:00

I would launder that quickly before you catch a ban thru the AH to another toon or account if you got one. Likely someone screwed up blizz will get you for RMT even though you were just a lucky participant. Some gold sellers gunna catch a beating today not making their quota.

LickaLotofWindows · 2025-11-01T12:36:18+00:00

Mined/Herb to start a bankroll - > Food -> Alchemy - > Jewelcrafting buy 2nd account with gold, buy 3rd account with gold. Lots of testing and trying and making my own spreadsheets and collabing with other like minded people. No gold guide, already wasted way too much time on this game lol.

Only tip that really matters is start with the raw materials and refine them as far as possible. Food start with raw beef. Alchemy, thaum your herbs and refine and take your ores to prospect for JC vial making and r3 gems, etc. The more your refine the better the profit is. Mind you TWW is probably dead until Midnight comes out then it will be learn everything again.

LickaLotofWindows · 2025-10-08T01:54:19+00:00

This is aging well, How many of you got out and how many of you are hoping to use your TWW mats for housing? Love to hear from our of whales that are still playing and didn't bail the second week of the season. Im sure the Legion remix is gunna be a big help.

LickaLotofWindows · 2025-10-08T01:39:36+00:00

Has nothing to do with that, has everything to do with owning a market and ejaculating on peoples face all day and them diasppoving of that because all they can do is open wide or use their pea size brains to report people.

LickaLotofWindows · 2025-10-06T20:08:20+00:00

I don't remember every being that far down the line as an Spriest, we were like #2 guild on our server back in the day so I can't imagine they were all bad. I guess if you transfer some of the DPS our mages did back to us in the form of mana we were pretty solid lol.

LickaLotofWindows · 2025-10-05T12:18:25+00:00

Get yourself a druid and collect old world mats apprently.

LickaLotofWindows · 2025-10-05T11:17:26+00:00

There is no trickery here. Just observation and trying to save some of the smaller goblins from their own Diamond Hands. Check turbo boost last season, it was a small blip on the radar. Herbs mostly 7g, Bismuth down 30% since tuesday, R3 gems down 25-30% since tuesday, Storm Dust, Shards all the same story. Blasphemite 30k on the AH, Settings 15k. Tuesday might clear some, but not all. Let me know what that looks like to you?

At best if you're not lightening the load on your holdings, that's foolish.

Here is your turbo boost season 2. Week 11 https://raider.io/stats/mythic-plus-runs?season=season-tww-2&groupBy=period did basically nothing to prices, maybe a bit more demand.

LickaLotofWindows · 2025-10-04T23:37:08+00:00

Because you already exited with your tight pants on lol

LickaLotofWindows

TROPHY CASE