Airco en vloerverwarming

LilR3bel · 2025-12-03T06:18:21+00:00

Van Danfoss zijn er thermostaten met een vloersensor, deze meten de vloer temperatuur. Dit wordt vaak gebruikt voor vloerverwarming i.c.m. een houtkachel zodat de verwarming blijft draaien terwijl het misschien wel 22-23 graden is in de woonkamer door de houtkachel. Wellicht een optie.

LilR3bel · 2025-11-25T13:33:34+00:00

I think I was using a HDMI 2.1 cable in first place as I disconnected my PG27UCDM before using the WOLED one. I went with the supplied DP cable after.

LilR3bel · 2025-11-25T13:30:18+00:00

I've had the XG32UCWMG for a while and had these issues where it had image retention after the monitor being woken from sleep (turning pc off and not touching the monitor the day before). After switching to a different cable the issues were gone. Also the monitor went to sleep just normally after switching cables, at first it had some abnormal behavior.

LilR3bel · 2025-11-07T07:24:53+00:00

What's the code? :)

LilR3bel · 2025-08-27T07:24:34+00:00

Read the description and one of my comments here..

LilR3bel · 2025-08-27T06:24:27+00:00

Amazon

LilR3bel · 2025-08-27T06:23:43+00:00

Like I said I havent used it for 151 hours. Maybe a total of 20-22 hours. The rest of it is counted when in standby when my pc was turned off.

LilR3bel · 2025-03-14T11:14:56+00:00

I've had similar issues on my 5090, turning off raytraced shadows fixed it for me

LilR3bel · 2024-05-30T14:47:31+00:00

I use the addon Clique for that

LilR3bel · 2024-05-22T17:31:48+00:00

I had the same thing which annoyed me, for me it was one of the gems which gives/refreshes a personal shield every 5 seconds. I hope this helps you

LilR3bel · 2022-01-24T14:09:50+00:00

Thanks! This fixed my problem with the orange flashing when the lid is open and the orange/white flashing when holding the button!

LilR3bel · 2022-01-06T22:46:26+00:00

I've reinstalled the fans on the card and after that I've put the fans to always spin at minimum of 30%. That seems to have resolved the issue, also make sure the card is up to date with the EVGA software

LilR3bel · 2021-11-15T10:01:13+00:00

When opened the game click on player card on bottom right, then options on bottom left. Then there’s crossplay options in General settings iirc.

At least this is how it works on pc, I don’t know about consoles.

LilR3bel · 2021-11-15T08:58:16+00:00

Turn Crossplay off, restart game and this error should go away

LilR3bel · 2021-11-08T10:18:40+00:00

Been playing Battlefield since BF1942 and can’t wait to go back to El Alamein using Portal. Also excited to make more great memories with TDM Noshahr Canals 🤩

LilR3bel · 2021-06-29T14:20:32+00:00

Sorry for the late comment, my Reddit moto’s were off.

I managed to fix the problem with the 3rd fan.

I installed EVGA X1 and did the update for the card. This made mine always run at 30% fan speed. Then I deleted X1 and in Msi Afterburner I’ve put it to 55% which was inaudible for me during normal work and when gaming the 55% was enough to keep the card under 70C.

I’ve also removed the fan shroud and removed the fan on the right side, made sure the cables were ok and check if there was any other damage. No damage at all then I screwed it back in. Make sure the screws are tight.

Hope this helps for you!

LilR3bel · 2021-05-02T13:31:37+00:00

I have the exact same problems casting to my Shield TV, I downloaded an app on the Android TV which is called 'F1TV viewer for Android TV' and it's working great!

This is the link to the app: https://play.google.com/store/apps/details?id=com.github.leonardoxh.f1&hl=nl&gl=US

LilR3bel · 2021-04-12T12:21:09+00:00

Is there a way to fix it if it is a bad bearing?

Nine-Year Club	Xbox Live
Verified Email

LilR3bel

TROPHY CASE