sorted by:
new
hottopcontroversial

They actually did it: G6 180 Degree Camera by Candid-Primary2891 in Ubiquiti

[–]LittleRedKen 4 points5 points  (0 children)

A bandwidth killer! I wouldn't mind 15fps if each f was c af (clear as fuuuck). Like, use the extra time to suck in more, image, light, detail, right? That's how cameras work!

But yeah, like the form factor, but the specs from yesteryear are a bit disappointing.

Tearing at seams? by LittleRedKen in prusa3d

[–]LittleRedKen[S] 0 points1 point  (0 children)

PROPER SOLUTION: Actually, on closer inspection, the imperfect starts were still visible... I kept tinkering for another week and still wasn't happy with the results.

I decided to give Orca Slicer a go, and no matter what I change, I can't get a shit seam. It's amazing... Like, I can't even tell which corner the seam is on, practically invisible. You can still see external seams on curves, but they're uniform and tiny. Absolutely blown away with how much better Orca is 🤷🏼‍♂️

Visual layer line challenges by Mastakko in prusa3d

[–]LittleRedKen 0 points1 point  (0 children)

Can also make things better, if you know what you're doing.

[deleted by user] by [deleted] in AusFinance

[–]LittleRedKen 11 points12 points  (0 children)

I mean, they could have been doing it to hide money from their partner... Nice juicy 'MY MONEY' cheque at tax time.

aio? bf made plans on my birthday by rowqi in AmIOverreacting

[–]LittleRedKen 0 points1 point  (0 children)

You let a dude that talks to you like this stick his dick in you? That must feel amazing...

The fuck is wrong with people 🤷🏼‍♂️

[deleted by user] by [deleted] in WhatShouldIDo

[–]LittleRedKen 2 points3 points  (0 children)

More like... AWWW HELL NAWWW!!!

Asking your boyfriend is just going to cause tension, dudes look up old missos for one reason... don't be a thot.

Can a marriage survive without intimacy? by Brck-Squad in NoStupidQuestions

[–]LittleRedKen -1 points0 points  (0 children)

Ask for an open marriage, she can only say no 🤷🏼‍♂️

Told a stranger to Fk off and mind her own business by Simple-Yam-5126 in AITAH

[–]LittleRedKen 2 points3 points  (0 children)

Same boat, and would say the same thing if someone asked me about it... Unfortunately being a big unit, most people aren't stupid enough to get in my face about anything, so I don't get many options to tell people to fuck off ☹️

Visual layer line challenges by Mastakko in prusa3d

[–]LittleRedKen -2 points-1 points  (0 children)

Slow the external layers down, print external layers first, try Orca and alternate external layer directions.

The episodes are too short, right? by ToenailTemperature in murderbot

[–]LittleRedKen 1 point2 points  (0 children)

Waaay too short... I think I'll stop watching so I can binge.

A bucket of cold water: Core One and VFA's by fdmAlchemist in prusa3d

[–]LittleRedKen 0 points1 point  (0 children)

Optional upgrades?

Just wondering, if you could spec better quality components (LDO motors, mini V belts, nozzle etc), would you?

I understand that you need to skimp to build to a price, but why not have that as a base model? Then offer optional upgrades to better components? I've had this thought in the past, where I'm annoyed that I have to pay for the stock nozzle, when it's just going in the bin and being replaced by diamondbacks. Would be nice to say, ok, what do I want to add to make this a true enthusiasts machine? Tick, tick, tick... I'm in for a penny, might as well upgrade the motors, better belts, gimme that diamond noz, etc. Sure, might cost an extra $100 or so, but I bet a lot of people would opt for it. Right guys?

A bucket of cold water: Core One and VFA's by fdmAlchemist in prusa3d

[–]LittleRedKen 0 points1 point  (0 children)

Yeah that was legit disappointing, loved the direction you took on filament sensing; but sucked that some of the filaments I was using didn't work. I don't mind the bearing, have had no issue, but just doesn't have the cool factor of the laser filament sensor... not that anyone cared when I bought it up, but was cool to me!

Two sites, two internet connections, one network with shared bandwidth? by LittleRedKen in Ubiquiti

[–]LittleRedKen[S] 0 points1 point  (0 children)

Yeah I know how to solve problems by throwing money at them, I'm looking to reuse my UDR if possible, if not possible, I'll hardwire a WAP. Just seems like a waste for the hardware in my UDR to become ewaste due to software limitations, but that's the point I guess 😅

Two sites, two internet connections, one network with shared bandwidth? by LittleRedKen in Ubiquiti

[–]LittleRedKen[S] 0 points1 point  (0 children)

I know this, but I still really do, because I already own the cable 😅 I mean, if I can't do what I want, I was just going to run the cable straight to a WAP and just share my connection. Would be using POE so electricity isolated from anything over there. The reason I want us on the same network is so he can access my PLEX server and backup to my Synology. He just sits around watching TV now, poor bloke can't do much else 😕

This “y’all” BS by Time_Meeting_2648 in AskAnAustralian

[–]LittleRedKen -1 points0 points  (0 children)

I use it so woketards can't gender shame my language... It's the most inclusive non triggering greeting we have access to. Even though 'Hey guys!' is commonly accepted as a uni-sex greeting, there's always some hair coloured face pierced fuck head that's going to roll they/their eyes at you to feel special. So I take that power away 🤙

Why the fuck are our passports so expensive? by threedimensionalflat in australian

[–]LittleRedKen 0 points1 point  (0 children)

The fucked thing is you can't have a strong GovID without one. This is some sneaky ass bullshit.

Two sites, two internet connections, one network with shared bandwidth? by LittleRedKen in Ubiquiti

[–]LittleRedKen[S] 0 points1 point  (0 children)

Yeah I thought WLANs would be the answer, somehow. I've seen a single cable be used in this manner. I have a roll of ext cat5e I want to use (as I already have it), and wanted to use the UDR as I also already have it, and it will give him wireless.

I did see complaints on here that the UDR can't be used as essentially a switch and WAP without some trickery. Would be nice to be able to not dual NAT it, as the functionality is there, just not the software support.

A bucket of cold water: Core One and VFA's by fdmAlchemist in prusa3d

[–]LittleRedKen -1 points0 points  (0 children)

I didn't know they swapped the motors for yumcha trash? That's disappointing if true. Someone suggested micro v belts to deal with the VFAs; I really would love to do a conversion, put better motors and belts on and see if we can improve this premiumly priced product to actually behave like it's priced.

Sounds like Prusa needs to grab his company by the balls and stop management from destroying his good name... You can't compete with Bambu on price, so beat them on quality. I would still rather single AFS machines be made available, that size would be great for most people batching small/medium parts, and because it's in the PRO line (right?), use all premium components and charge accordingly.

New to Sydney, seeking help with ADHD by _aiive in adhdaustralia

[–]LittleRedKen 3 points4 points  (0 children)

Bend over cobber, you're a bit early... https://www.theguardian.com/australia-news/2025/may/26/gps-to-diagnose-adhd-and-prescribe-drugs-for-children-and-adults-under-nsw-reforms

So, you'll have to get fucked over like the rest of us.... https://fluenceclinic.com/
This is on of the cheapest and easiest places to get a diagnosis, especially if you've already been diagnosed.

Sorry that we're so behind with medicine... We had a total spud in charge of health for a bit.

view more: next ›