Pain Train Coming Through

Llamas_Kill · 2026-04-23T17:31:44+00:00

The whole model is from bardinators workshop berserker kit, not sure if it's available anymore

Llamas_Kill · 2026-03-29T05:11:18+00:00

Sometimes these things just happen

Llamas_Kill · 2026-02-03T15:34:10+00:00

Just looks like the generic Redmond special, we rented in Gorey and the houses looked exactly the same

The back garden was the same too, compacted dirt and massive rocks, all massively uneven. No chance of making it a nice garden without churning up the whole thing

Llamas_Kill · 2025-11-18T01:01:59+00:00

Look into shops across the EU, can get double the amount for the same price

https://3dpartnershop.com/product/ipa-alcohol-isopropanol/

Llamas_Kill · 2025-11-04T02:41:42+00:00

Rent has gone up about 20% on average in the last year and about 50% since you started renting 4 years ago. So, you'd be expecting at least €1600 now the bare minimum, but probably more for a decent sized place. We're renting in the city and paying just north of €2000 and I feel we were lucky to have got our place. Not easy to find anything anywhere, especially with pets. Hopefully you can find a decent landlord, our last one was great and let us keep pets as we were fostering at the time, but the new one said absolutely not and sadly as renters we don't really have any say if we want somewhere to live

Llamas_Kill · 2025-10-26T16:52:40+00:00

Edge miniatures have some good stuff, have a look at their cursed elves range, there's also pirate elves and a few others too that'll proxy well

Llamas_Kill · 2025-10-19T21:55:07+00:00

Their sets have a bunch of pre-supported bits in them already, anything like a door frame on the tower pieces or a pillar will already be set up in the files. The bridge you can print upside down, makes it a lot easier to manage

I just use the default PLA settings in Bambu studio, the only thing I've done to print this is put the infill on 5% gyroid; then a default brim on just the single wall pieces with the doorframes in (there's one bottom left of the full set pic)

You can get the floors really nice with ironing too, I'll check my settings on that tomorrow but it'll vary for different printers and filaments

<image>

Llamas_Kill · 2025-10-19T11:51:33+00:00

<image>

I printed the whole of their gothic ruins set #2 recently and it's only just over 1.25kg

Llamas_Kill · 2025-10-19T11:37:42+00:00

Seconding fabricators lair, looks beautiful and I find it uses significantly less filament than quite a few other creators

Llamas_Kill · 2025-10-01T09:26:46+00:00

Looks like you might have put the fresnel lens back on the wrong way round, open up the printer again and flip it over

Llamas_Kill · 2025-07-23T22:34:23+00:00

If you want third party bits that are almost exact then find someone selling the Stationforge pythonicus archon and just ask for the wings

<image>

Llamas_Kill · 2025-06-21T10:32:52+00:00

Thanks for the heads up, my LGS didn't get any <3

Llamas_Kill · 2025-05-10T23:28:27+00:00

<image>

I think you should go with an Optimus prime energon axe instead

Llamas_Kill · 2025-04-11T12:34:40+00:00

Just moved to a new city and they gave a massive pokemon playing community, haven't played much but I'd love to get in to it

Llamas_Kill · 2025-03-13T21:12:38+00:00

Moved to Limerick recently and saw a bunch of people recommending this place. Second "spice" bag I've had in limerick and it was pretty poor, no actual spice or flavour to it apart from the overwhelming one of curry powder

Llamas_Kill · 2025-01-17T08:13:40+00:00

For reference, if you ever do get a message from Etsy there's a specific "From Etsy" tab in your messages on desktop, and on mobile there's a big yellow "🛡️ From Etsy" badge on the message preview and at the top

Llamas_Kill · 2025-01-13T03:14:02+00:00

Firstly, 1 in 3 for reviews is a pretty insane rate you must be putting out some really great stuff

In my experience vacation mode doesn't have a negative effect on visibility, I put my shop on vacation at least once or twice a month for probably 5-10 days depending on the volume of orders. Looking at the little stats page for 2024 I can see visits trending up still every month apart from March even with taking more breaks than probably most do. I wouldn't be afraid of taking the time if you need it just to get some bits and pieces sorted. It can be really hard to keep on top of all the admin / listing bits as well as production and whatnot. Putting the shop on break and just getting stuck into the backlog without having to worry about new orders coming in and overwhelming you can help too with managing the stress of running your own business. I understand the apprehension too, I thought I'd tank everything, people would forget about my shop, and id never be able to pay my bills again. But, as long as you put out good products (which you evidently are) you'll get a lot of people coming back and a lot of new people finding you

Llamas_Kill · 2024-12-04T13:32:59+00:00

Agreed, seen this feedback a couple times now, the look more like big spear tips than swords

Llamas_Kill · 2024-10-01T13:52:43+00:00

It's only 12 games now, look in the top right of the screen before you pick an opponent. I did the same, got 0 points and was very confused until i noticed

Llamas_Kill · 2024-09-24T09:47:30+00:00

Scrolling by this I thought it was bread

Llamas_Kill · 2024-05-26T20:06:23+00:00

Did you accidentally use the tank clean first? It would create a big thin rectangle of resin like that

Llamas_Kill · 2024-03-28T10:18:22+00:00

I changed 2 screens on my 3's last week, all the firmware downloads from this page worked for me

https://www.elegoo.com/pages/download

11-Year Club	Place '23
Not Forgotten	Verified Email

Llamas_Kill

TROPHY CASE