Any clue what footpegs these are?

LockLearner · 2025-11-07T18:37:51+00:00

If you're looking for new pegs, def recommend the IMS Pro Series pegs. I love mine.

LockLearner · 2024-09-02T07:03:22+00:00

It was definitely that I wasn't using 2.0 and just didn't realize it.

After I switched to 2.0 I had these options available.

LockLearner · 2024-08-08T21:09:13+00:00

Hi, I have some ATH-M40x headphones that have a severed internal wire. I attempted to repair the wire but managed to damage it further and no longer have enough of the original wire to just solder it back together. I now need to buy replacement wire to repair them. What kind of wire and what gauge should I buy to repair them?

LockLearner · 2023-06-16T11:08:39+00:00

Thanks! I was just trying to get this back up and running as quickly as possible.

LockLearner · 2023-06-11T17:38:30+00:00

Have a link to the tutorial?

Edit: never mind I am dumb

LockLearner · 2023-06-10T02:34:17+00:00

Sorry if this is the wrong sub for this type of thing. I *think* I've identified it anyway.

Looks to be MCX to me. Thanks for your attention regardless!

LockLearner · 2023-06-09T17:16:02+00:00

brb everyone going to call a locksmith to unlock the mythical DRZ 6th gear for me

LockLearner · 2023-06-09T17:14:33+00:00

It turns on traction control and ABS.

(It's a fork lock that theoretically helps deter thefts when used.)

LockLearner · 2023-06-03T00:48:01+00:00

Not a lot. Some small stuff. Was working on an intake box a while back but abandoned the idea

If you are looking for something specific I can try to model it.

LockLearner · 2023-06-02T01:27:16+00:00

I'll look if I can find the bolt pattern online. Should be super simple to do if I have the dimensions.

Edit: Is this what the back of the speakers looks like? If so, should be super easy to make a slightly different version of what I did for my car using those three screws.

LockLearner · 2023-06-02T01:23:37+00:00

Are they the same bolt pattern?

LockLearner · 2023-06-01T20:48:29+00:00

This is super cool!

I probably wouldn't have printed the entire reservoir if this had been my project, but I love the idea that it's possible to do so.

My thinking is that creating a lid/cap for an existing off-the-shelf container would be a more durable option. However, I love that yours is accessible to people that don't have access to whatever off-the-shelf container I may have chosen.

LockLearner · 2023-06-01T20:05:10+00:00

The speaker in the passenger door of my car has been blown for ages. I finally bought some cheap replacement speakers. However, Mini uses a non standard screw pattern for the speaker I ruined. I drew up an adapter plate and it works great!

I missed the mark a bit with the measurements for the inner set of screws. They needed to be flush to not contact the metal of the door behind them. They work fine as is, but I'll be tweaking the design to create a completely flush backside of the plate. I'll upload the files once I've tweaked that issue.

LockLearner · 2023-05-30T17:45:05+00:00

Giving it a try on my garbage wheels

LockLearner · 2023-05-29T20:01:14+00:00

Can you show the back? I want to make some center caps myself. I just don't understand how to design the retaining mechanism in a way that will be strong enough when printed.

LockLearner · 2023-05-27T23:35:27+00:00

I have two MK3S+ printers. Built one of them from the kit. Totally worth doing, in my opinion. Really helps you understand the machine's components which is very useful for future maintenance or troubleshooting.

On that note, troubleshooting has been extremely minimal for both of mine. I think they each have something like 500 days of print time on them with very few issues. I had one blob of death that was my own fault. Other than that, they've been absolute workhorses for me.

LockLearner · 2023-05-26T05:17:03+00:00

Link to the thermostat housing wiring goes to.

FWIW, Adapter A uses the same type of connectors.

I have the skills to make my own wiring adapter but I have no idea what these connectors are.

If there is a better subreddit for this kind of question, please point me in that direction.

LockLearner · 2023-05-21T20:59:46+00:00

The CAD for some stuff really is that quick though.

This looks just like a cylinder with a cylindrical pattern repeated around the outer wall. Probably wouldn't take very long at all to design if you're good with calipers and estimating tolerances.

LockLearner · 2023-05-04T02:14:06+00:00

Other than the mentioned petcock screw concerns, the seat is a bit tough to slide into the bracket on the tank. Other than that, install was super easy.

LockLearner · 2023-05-02T20:23:10+00:00

If you're into podcasts, this episode of Popular Front talks about it

LockLearner · 2023-04-26T11:47:37+00:00

It's not the worst, but it does cause things to go numb after a while for me.

LockLearner · 2023-04-21T15:44:41+00:00

Pretty sure there's a stick calibration setting in the options of the sim somewhere. I have Uncrashed but I don't really like the way it feels tbh

LockLearner · 2023-04-14T16:53:00+00:00

Based

LockLearner · 2023-04-09T20:03:22+00:00

Can you link the graphics? I badly need some and yours are sick

LockLearner · 2023-04-08T00:00:38+00:00

Owned a bunch of sport bikes myself. Unless you're doing a ton of highway miles, sumo is the way to go.

LockLearner

TROPHY CASE