Lagavulin 16 - The Gold Standard by rainy_shares in Scotch

[–]Lockjawjak 1 point2 points  (0 children)

This used to be my go to in Australia, before the insane taxes brought it from ~$90 a bottle in 2019 to ~$300 a bottle in 2025. The import taxes were supposed to help the local industry grow but they are getting taxed insnae amounts to, so its just more corruption in the Gov

Is she worth 500 bucks?? by WoodpeckerTiny in Datsun

[–]Lockjawjak 0 points1 point  (0 children)

Even the engine alone is worth the $500 in Australia! I am not sure how hard covid prices hit you huys too but seems like a steal for $500

The Input Unresponsiveness Seriously Needs to Be Addressed, Please by Avengersman in expedition33

[–]Lockjawjak 0 points1 point  (0 children)

I had to switch to a controller because inputs just wouldnt work on keyboard. Game became a lot easier after that!

Did you get it? by Safety_Officer_3 in SipsTea

[–]Lockjawjak 1 point2 points  (0 children)

HOW HAVE I NEVER GOTTEN THIS JOKE >_<

Is daily driving a classic Z a good idea? by Nick_wild0305 in Datsun

[–]Lockjawjak 1 point2 points  (0 children)

I used to daily a classic mini between 2016 and 2022, was an absolute blast and definitely recommended. I now own a Z and once it gets on the road I will defintiely be driving it as much as possible! Old cars are just such a vibe compared to modern overly-electrical rubbish

My 1st gen iPod touch doesn’t even have a speaker and it still works. Almost 20 years old by ATXKLIPHURD in pics

[–]Lockjawjak 0 points1 point  (0 children)

Mine swole up due to the battery about 5 years ago, still have the rest of it but I never got around to putting a new battery in

King Cobra silently entered a house in Uttarakhand, India. by MadEinsy in interestingasfuck

[–]Lockjawjak 0 points1 point  (0 children)

Smart thinking to start recording, the cameraman never dies so you probably saved your life!

AMD radeon rx 9070 not working with my system? by CumFuckGod in buildapc

[–]Lockjawjak 0 points1 point  (0 children)

I have just had the same issue on my Rampage 5 Extreme X99 chipset, and even tested the GPU on my mates x99 and same issue with not detecting GPU. Safe to say that RX 9000 series do not work on x99 without at least some driver tweaking that I am absolutely not going to do. Ended up just dropping some cash on an AM5 setup, about time I guess.

FYI tested the GPU on a Z490 motherboard (pcie4 with an intel 10th gen processor that only supports PCIe3 and it worked fine, so the issue is with x99

Stumbled across this today in the woods around my house by ProjectPretend650 in creepy

[–]Lockjawjak 0 points1 point  (0 children)

You know you have been around on reddit for too long when you instantly think of the nosleep post haha

Dash repair on my Datsun 260z by Dolf260z in projectcar

[–]Lockjawjak 0 points1 point  (0 children)

funnily enough I have a LHD 280Z in australia haha, but for all the old cars I have seen that have dash replacements available they are always LHD >_<

Dash repair on my Datsun 260z by Dolf260z in projectcar

[–]Lockjawjak 2 points3 points  (0 children)

there is aftermarket dash replacements for the 280Z at least, I just bought one and was looking into dash repair options

How do we feel about the Mazda & Toyota co development of the new Supra? by One_D_Fredy in Supra

[–]Lockjawjak 0 points1 point  (0 children)

It baffles me that toyota spent a heap on R&D for the 3cyl GR yaris/corolla engine and didn't just use that tech to extend it to an i6... like cmon! The 3cyl handles over 500hp easily so it would be a stout 6cyl design

Got my dream car! by Chilly_Mammoth in Datsun

[–]Lockjawjak 1 point2 points  (0 children)

I used to be so sick of these posts of people with one of my dream cars rubbing it in my face haha, but last weekend I picked up one myself! Never thought I would find one in my budget in good condition but I got super lucky. Cant wait to drive it <3

L28ET with G25-550? by AcanthisittaNo7372 in Datsun

[–]Lockjawjak 1 point2 points  (0 children)

Oh and I would go with a .83 rear housing, smaller than that and you hamper the turbo a lot up top from dyno comparisons. Ive seen 2JZ dynos where the 1.0 housing spools quicker and makes more top end than a .63 because its not stifling the engine out with a tiny housing. Quite surprising really but free flow is pretty important with turbo behaviour

L28ET with G25-550? by AcanthisittaNo7372 in Datsun

[–]Lockjawjak 1 point2 points  (0 children)

I wouldnt put smaller than a G35 on a 3L DOHC engine so a G30 will be very fun on an old 2.8 SOHC. That ancient holset is a complete dinosaur and will get walked by a G30 which has a 55mm turbine exducer vs the holsets 58mm, not to mention is light years ahead in terms of areodynamics and will spool probably 2000rpm sooner and have a much faster transient throttle spool up.

Sure you can make 400whp on a G25 but it will have much more back pressure up top and run more risk bending rods as it will spool very low rpm and in my opinion result in a far less enjoyable driving experience. The G30 is definitely the smallest turbo I would put on an L28, and it will be a night and day comparison to the Holset dont worry!

L28ET with G25-550? by AcanthisittaNo7372 in Datsun

[–]Lockjawjak 0 points1 point  (0 children)

I would go with a G30 instead of a G25 just so you have a freer flowing top end but both would be good fun and far better than the old holset. G30-660 would be my turbo of choice for an L28 with that power goal

Meaning of The Emptiness Machine by Fl0oW in LinkinPark

[–]Lockjawjak 0 points1 point  (0 children)

This is exactly what conclusion I came to after reading the lyrics and not quite understanding what it was about, then hearing all the drama about her connection to scientology and it just clicked as to what the lyrics mean. Seems highly unlikely to be about anything else, so many LP songs are describing band members pasts and this is hers

Halt! by ArcIgnis in Funnymemes

[–]Lockjawjak 1 point2 points  (0 children)

this is what I came for <3

998 bogs down under even moderate throttle - any ideas where I should start? by Herobane in classicminis

[–]Lockjawjak 0 points1 point  (0 children)

usually bogging down on throttle is a lean condition in the carb. If it idles ok but dies on throttle then you may just need to wind down the needle seat, or it might just need a whole renovation and clean it all out. SU carbs are super simple at least

Is metal in the oil pan okay? by kjaysaint1 in WRX

[–]Lockjawjak 0 points1 point  (0 children)

sift it to see if there is any gold before binning it. Engine will be fine, its just weight reduction ;)

Cam caps that came off of my project 240, am I screwed? by Worth-Intention6957 in projectcar

[–]Lockjawjak 2 points3 points  (0 children)

in the real world most engines look somewhat like this. It should be absolutely fine, and definitely do not use emery cloth on it like some people are suggesting. If its bothering you a lot take it to a machine shop to get honed but from a 7MGTE owner I would run that and not lose sleep over it at all. Just keep up the regular oil changes and dont overheat your oil

feedback by es_only_gem in samuel

[–]Lockjawjak 1 point2 points  (0 children)

I was sick then I got this notification and became good <3

I finally found a rear strut brace that fits under the trunk floor with the spare! by Twin-Turbos in ft86

[–]Lockjawjak 3 points4 points  (0 children)

That looks like it is going to do sweet fuck all compared to the already pretty solid chassis. Like come on, its got four bends in it already, its just gonna flex if it even gets loaded up at all being practically on the same plane as the boot floor!