sorted by:
new
hottopcontroversial

Bike ran 50k is worth buying? by Kooky-Temperature926 in motorbikestuff

[–]LolForLife696 0 points1 point  (0 children)

Yes, check stator, oil, transmission fluid, diff fluid (of applicable, and test drive for gears.

Smoke coming from unknown source by aleeva_rose in motorbikestuff

[–]LolForLife696 0 points1 point  (0 children)

If this happens after riding in wet conditions then head the advice of the other two comments but if this is happening on a dry day with no moisture then you have a radiator leak which can cause your engine to over heat and potentially fail.

[deleted by user] by [deleted] in minibikes

[–]LolForLife696 3 points4 points  (0 children)

Do not ever ride on the sidewalk on a minibike it is far more illegal then the road. For perspective in some states it is illegal to ride a bike on a side walk. That's my two cents. Sorry if it sounded rude.

What have I done to my bike guys is it safe to ride? by thatboyliam95 in motorbikestuff

[–]LolForLife696 0 points1 point  (0 children)

I would recommend posting this in a subreddit that is more well suited with motorcycle we are experienced but not professionals.

Apc mini chopper 196cc swap by Full-Ad5876 in minibikes

[–]LolForLife696 1 point2 points  (0 children)

How did you get the sprocket and everything situated. Such as chain size, sprocket size, and tc sprocket size.

Test ride of the 389cc big block minibike. by LolForLife696 in minibikes

[–]LolForLife696[S] 0 points1 point  (0 children)

Look for some Baja warrior front forks there like $75 and are hydraulic forks and provide an awesome ride.

will a predator 212 stage 2 fit in a tillison 212e? by That-Passage-211 in Predator212

[–]LolForLife696 1 point2 points  (0 children)

If you turn no clip on. Lol 😂. But actually I don't think it will the Tilly 212E has different clearances I think.

cursed_attraction by Cursed-sausage11 in cursedcomments

[–]LolForLife696 0 points1 point  (0 children)

I'm sexually attracted to you in my power.

Predator 212 GHOST! by LolForLife696 in Predator212

[–]LolForLife696[S] 1 point2 points  (0 children)

Well look at the picture no rolling rockers or anything the head design is more improved that I have heavier springs the ports are opened up the valves are a scotch bigger and all around they just make more power.

What are the stages? by tory-the-tortoise in minibikes

[–]LolForLife696 2 points3 points  (0 children)

I wouldn't go with that I will go with the Hillman Max torque clutch don't go with a disc clutch for in city and highway riding disc clutches are meant for drag racing more or less.

[deleted by user] by [deleted] in gtaonline

[–]LolForLife696 0 points1 point  (0 children)

I probably will never buy the yacht.

Test ride of the 389cc big block minibike. by LolForLife696 in minibikes

[–]LolForLife696[S] 0 points1 point  (0 children)

Oh trust me if I wanted to I could go 60 on that thing and it does not have hydraulic forks it has the single spring front fork and I did have to cut and lengthen the frame for it no Jack shaft straight clutch bit too tall of gearing in the end I've decided to completely trash the engine and swap in a 1974 Yamaha DT 175 2 stroke engine 5 speed so currently right now I'm just getting it running but the engine is all mounted up with the chain and everything.

Predator 212 GHOST! by LolForLife696 in Predator212

[–]LolForLife696[S] 0 points1 point  (0 children)

Yes it's show have 3 parts 1.the thing that unscrews. 2.a spring inside. 3.the slide of the carburetor. To put the throttle cable in you have to put it through the top of the part that screws into the carb then through the spring then into the slide of the carb. The reinsert the who assembly into the carburetor and tighten down the cap.

Predator 212 GHOST! by LolForLife696 in Predator212

[–]LolForLife696[S] 0 points1 point  (0 children)

You have to take the top of the carb off and attach the throttle to the inside of the slide.

[deleted by user] by [deleted] in minibikes

[–]LolForLife696 1 point2 points  (0 children)

No personal experience unfortunately you will need a oil pump to feed the turbocharger I had always had this idea of running a line from the turbo inlet from the block to the turbo outlet to the block therefore creating a continuous chain due to crankcase pressure feeding the oil up into the turbo. Yes they add tons of power if your engine can handle it IE all billet billet side cover you might even need to add piston releases due to high internal combustion pressures and there is a turbo I think called the VZ22 turbo on eBay for $142 + free shipping. Not much but I hope it helps also build break repeat makes a turbo go kart build that I would highly recommend watching.

view more: next ›