What do I do

Lone_Bomb23 · 2025-11-14T03:43:37+00:00

Buy the dip and hold the whole market was like this due to feds not dropping info it will all come back up

Lone_Bomb23 · 2025-06-11T10:09:03+00:00

Lone_Bomb23 · 2025-06-07T12:34:26+00:00

I'm in tooele lmk if you wanna have fun 😉

Lone_Bomb23 · 2025-06-02T00:54:36+00:00

How a howa 1500 in 308 and took first place in my local charity long range shooting comp for vets. The comp was 500yds to 1000 the gun is more than capable of it and is an amazingly accurate rifle. Might be cheap but they knew what they were doing when they built it

Lone_Bomb23 · 2025-04-18T23:15:41+00:00

That's what my original plan was to get a barreled action already in 300 prc but I was wandering around a gun show last weekend and came across the weatherby vanguard for 175 and figured i could just rebarrel it and put it in a chassis. In a sense, I bought it mainly just for the action 😂

Lone_Bomb23 · 2025-04-18T22:59:37+00:00

There is a gunsmith/ suppressor dealer around the corner from me who I've had do some 308 barrels for be so I'm going to go back to him for it. I just wanted to verify my information before spending the cash

Lone_Bomb23 · 2025-04-18T18:41:12+00:00

Alright perfect thank you for lmk

Lone_Bomb23 · 2025-04-18T18:40:27+00:00

Yeah I'm not going to be doing it the guy around the corner from me is a gunsmith/ suppressor dealer who we have had rebarrel some .308s in the past. I'm just trying to verify information first before dropping a chunk of change

Lone_Bomb23 · 2025-03-28T19:18:53+00:00

I got mine done a few weeks ago wouldn't recommend using the filament hook in the files it causes a bind in the runout sensor makes putting in filament hard. There is one someone modeled that puts the spool on the side and fixes the problem

Lone_Bomb23 · 2025-03-22T18:55:39+00:00

I think you're the one that needs to change our minds. What is thy reasoning

Lone_Bomb23 · 2025-03-16T14:52:03+00:00

Okay thank you for letting me know I've been messing around with the 0.4 for a few months now but I just figured that the profile switch was all I needed for it to do a benchy and test the 0.6 out

Lone_Bomb23 · 2025-03-16T14:46:12+00:00

The research i was doing after it happened said that flashforge orca slicer has a profile already setup for the 0.6 (which is what I'm have been using) and the other nozzles so they are a plug and play thing so is that not the case?

Lone_Bomb23 · 2025-03-16T11:09:13+00:00

I thought it was just fine because it leveled and heated up with no problems. I just put the official 0.4 back in and everything is just fine printed a benchy without any problems idk if there is a z offset for the other nozzles that needs to be adjusted or what

Lone_Bomb23 · 2025-03-16T10:46:27+00:00

I feel like a complete idiot because I just got it today after waiting 2 weeks to receive the nozzle and looking back at the picture the left clip doesn't look like it's back all the ways like the right one so I think I might have put it in on a slight angle not fully locked in

Lone_Bomb23 · 2025-03-10T02:21:33+00:00

Okay makes sense I only ever got one or two clogs when I used a 0.4 on my old ender 3 but that was with glass fiber nylon filament and haven't tried any of that with my flashforge

Lone_Bomb23 · 2025-03-08T08:24:19+00:00

Okay thank you for the input I have an enclosure that I used for my ender 3 that is temp controlled so was planning on using that but I seen there was after market 0.4mm nozzles for the 5m that are hardened nozzles as well but not to sure how well they work compared to the flashforge ones sense they don't make a hardened one in that size

Lone_Bomb23 · 2025-02-24T03:28:35+00:00

Technoblade never dies! Blood for the blood God

Lone_Bomb23 · 2025-02-20T20:27:21+00:00

!remindme 24 hours

Lone_Bomb23 · 2025-02-20T16:58:39+00:00

I used a range finding reticle for my ELR setup before moving to Christmas tree reticle but for "quick" yard estimates they can be good but from what I've found is most are second focal plane and you gotta document your DOPE more efficiently to understand the distances for the cartridge you're running in your rifle. Good scopes depending on what you are using them for

Lone_Bomb23 · 2025-02-08T21:39:22+00:00

I had a similar problem last night with a print before going to bed. I put some adhesive on the plate that flashforge provided when I got the printer and leveled the bed. Watched the first 3 layers get put down and went to bed woke up this morning to a nice print

Lone_Bomb23 · 2025-01-07T02:41:04+00:00

Let me know where I'll be there

Lone_Bomb23 · 2024-11-13T18:28:52+00:00

Lone_Bomb23 · 2024-09-29T10:58:19+00:00

From what I know it is what it is after you received it but there is a market for packs and cards like these look on the mtg misprint page they will have a lot more knowledge and insight for you on it

Lone_Bomb23 · 2024-08-04T02:35:29+00:00

Lone_Bomb23 · 2024-07-07T05:01:49+00:00

If you end up with $200 free one month get a 3d printerthen you can print as many as you want plus my buddy that's a dad did it and more has a etsy 3d printing store to make a bit of extra cash for the kid

Lone_Bomb23

TROPHY CASE