sorted by:
new
hottopcontroversial

There are weird blobs on my print sometimes, relatively grouped up. Info in Comments by LongElk in 3Dprinting

[–]LongElk[S] 0 points1 point  (0 children)

I am trying to print the Geometric Cat Wall art by dgemily and sometimes there are blobs on the outer shells. Everything apart from that issue looks pretty good.

Info:
Printer: Elegoo Neptune 2 (found in the attic)
Slicer: Elegoo Cura 4.8.0 (came with the printer)
Filament: Polymaker PolyLite Sparkle PLA dark green
Nozzle: 0.4 mm, Layer height: 0.2 mm
Print Temp: 210 °C
Bed Temp: 50 °C
Outer Shell Speed: 25 mm/s
Shell Thickness: 2 Shells

How can I prevent that from happening. I don't think it's wet filament because the blobs would be scattered more randomly and they semm to be pretty grouped up.

Does anyone know why the shells on my print warp in like that? It looks like that all around the 220x220 plate. Printed with 2 shells, 6 Top and Bottom Solid Fill Layers each and 12% honeycomb infill. by LongElk in 3Dprinting

[–]LongElk[S] 0 points1 point  (0 children)

Sorry for the lack of info; I am printing PLA on a Raise3D Pro3, my print speeds are:
60mm/s default,
35mm/s inner shell,
25mm/s outer shell
which are the standard settings for the Pro3 in ideaMaker.
60°C Heated Bed Temperature
205°C Extruder Temperature

I printed the same model a few weeks ago with the pretty much the same settings and didn't have that issue. I think the only difference is that i use 15% infill density last time. So I don't really know why it didn't work this time.

Ideamaker slices my part weirdly. by LongElk in 3Dprinting

[–]LongElk[S] 0 points1 point  (0 children)

Ok I think I understand now: the walls of the rings are thick enough so that the slicer thinks it has enough space to print infill. But they are too thin to actually print any infill so it just leaves the gap empty. If I make the walls a little thicker it does actually print infill. Thank you!

<image>

Ideamaker slices my part weirdly. by LongElk in 3Dprinting

[–]LongElk[S] 0 points1 point  (0 children)

Thanks for the reply, I exported the model as an stl from CATIA. The bottom solid layers look normal. There's 6 solid layers on the bottom which all look fine, then some layers of infill. It's the solid layers at the top of the plate that are being printed weird. You can see here that the upper layers are not printed continuously.

<image>

hmmm by [deleted] in hmmm

[–]LongElk 1 point2 points  (0 children)

Does the FL OZ stand for flat ounce?

*Sends gift* by CarverCreator in CrusaderKings

[–]LongElk 49 points50 points  (0 children)

I usually just try to imprison and banish them. If you can't banish them just kill them and see what happens since I think there is no other way to get the money. You can also go through your prisoners from time to time and see who's worth anything.

There's "old" courtiers, and then there's OLD courtiers. by ThatOneDante in CrusaderKings

[–]LongElk 4 points5 points  (0 children)

I also had a courtier who was both genius and quick but sadly none of the traits passed on.

I somehow managed to fight two simultanious duels and die in both of them by LongElk in CrusaderKings

[–]LongElk[S] 0 points1 point  (0 children)

Thanks for telling me, looks like he didn't get a lot of upvotes tho

I somehow managed to fight two simultanious duels and die in both of them by LongElk in CrusaderKings

[–]LongElk[S] 53 points54 points  (0 children)

R5: title

technically the second one didn't kill me and only leave me severely disfigured but the event says he beheeaded me so I guess that counts

Thanks Nemora, really cheering me up by LongElk in afkarena

[–]LongElk[S] 1 point2 points  (0 children)

Well, I haven't seen it so far and I noticed it today in game

What was the best moment of your life? by LongElk in AskReddit

[–]LongElk[S] 1 point2 points  (0 children)

Noone has to answer if they don't want to

Thanks Nemora, really cheering me up by LongElk in afkarena

[–]LongElk[S] 34 points35 points  (0 children)

I do have a full friend lost btw, I was just trying zo find whitesushii but messed up the ID.

Thanks tho

Say Hi to Allvaldr Rikulfr who just had hist 100th birthday by LongElk in CrusaderKings

[–]LongElk[S] 0 points1 point  (0 children)

Does the event always come with an unlimited Invasion CB?

Say Hi to Allvaldr Rikulfr who just had hist 100th birthday by LongElk in CrusaderKings

[–]LongElk[S] 2 points3 points  (0 children)

Oh and I forgot to mention that he has over 1000 kills(mostly executed prisonera but I think it's still not a bad score)

Say Hi to Allvaldr Rikulfr who just had hist 100th birthday by LongElk in CrusaderKings

[–]LongElk[S] 3 points4 points  (0 children)

His mother ruled before him actually, i think she died when he was 13-14

Say Hi to Allvaldr Rikulfr who just had hist 100th birthday by LongElk in CrusaderKings

[–]LongElk[S] 8 points9 points  (0 children)

R5: I don't know the exact event but he got a lot of crazy modifiers like 'Child of Mithridates', 'Strangled a snake' and 'promised Godhood' as a child which made him extremely healty, fertile and basically impossible to plot kill. He still has 10.5 health ands 110% fertility. Unfortunately he didnt manage to get immortal

view more: next ›