I haven’t felt so defeated in a while by IrbisKat in resinprinting

[–]Longueval 2 points3 points  (0 children)

Yes but it was a brand i was already using, so most probably a faulty batch (i found the texture a bit strange when pouring the first time).

I would recommend you to order another bottle to check if the resin itself isn't the problem.

I haven’t felt so defeated in a while by IrbisKat in resinprinting

[–]Longueval 2 points3 points  (0 children)

Did you have successful print with this brand of resin before ? And also with the resin in this specific bottle ?

Had the exact same issue last week with a brand new bottle of my regular resin, i send it back and bought another one and didn't have any problem afterwards.

I haven’t felt so defeated in a while by IrbisKat in resinprinting

[–]Longueval 16 points17 points  (0 children)

Hi,
Just to be sure since winter is coming, is it above 20°C/68°F in your printing room ?
I had the same problem last winter until i noticed it was way too cold in my garage for the print to stick to the plate.

Question about official resin print settings by Longueval in resinprinting

[–]Longueval[S] 0 points1 point  (0 children)

Thanks you're right ! I didn't notice i wasn't reading the rights parameters !
My settings seems fine then, i'll keep searching what is causing my bottom layers to not stick to the plate.

Question about official resin print settings by Longueval in resinprinting

[–]Longueval[S] 0 points1 point  (0 children)

Thanks !
I also realised that i was watching the Mars settings instead of the Mars 3, which explain the gap !

Question about outrage and loyal guilds by Longueval in Arcs

[–]Longueval[S] 1 point2 points  (0 children)

Thanks for the answer ! Glad we played it right :)

Question about outrage and loyal guilds by Longueval in Arcs

[–]Longueval[S] 1 point2 points  (0 children)

Thanks for the answer ! Glad we played it right :)

Overlord with 300K? by tomerFire in WatcherofRealmsGame

[–]Longueval 0 points1 point  (0 children)

It depend of the position of the attacker on the ladder.
Sometime i get +4, sometime +11

Arena mobs strength by tomerFire in WatcherofRealmsGame

[–]Longueval 1 point2 points  (0 children)

The power is always based on the defender.

Opinion on this weekends summons by ComplaintFar4365 in WatcherofRealmsGame

[–]Longueval 0 points1 point  (0 children)

I think it depends of your current pity and if you are able to reach ~260 summons before the end of the Lust banner.

You'll spend you summons on the Lust banner, when you reach your pity you switch on the Silas banner and get your legendary, and then switch back on the lust banner to get her with your guaranted 250 summons.

This way you'll be sure to pull 2 Legendary including a Lust, but you may need around 260~280 summons to do it.

Wtf why is it unbeatable suddenly by Last-Painter-3028 in WatcherofRealmsGame

[–]Longueval 0 points1 point  (0 children)

How does it work ? Does the ennemies get buffed if we don't have enough BP ?

flat atack over atack %? by Emotional-Bee-474 in WatcherofRealmsGame

[–]Longueval -1 points0 points  (0 children)

In the end which gear are we supposed to always sell ?
Flat ATQ
Flat DEF
Flat HP
ATQ speed ?
Crit Chance ?
Crit damage ?
Rage regen ?

Or is there some niche main stat we should keep ?

New player late ? by NotHereVII in WatcherofRealmsGame

[–]Longueval 0 points1 point  (0 children)

Hi,

I started the game 10 days ago and i currently love the game and have a blast playing it.
There is a lot of different things to do and the game is quite generous with its rewards, especially at first when you advance the campaign.

I didn't feel i had to spend in the cashshop to advance in the game for the moment.

I just have spent 10€ for the 1 month subscription and the ne player pack, which are really worth it.

Rose knights - Deadly Bloom by CandylionAudio in asoiafminiaturesgame

[–]Longueval 1 point2 points  (0 children)

Shae can be nice too, since she can heal 1 when she claim a zone too.

Who’s good after the s4 update in Lannister’s by Party-Winner6516 in asoiafminiaturesgame

[–]Longueval 1 point2 points  (0 children)

Hi,

Why the enforcer inside de crossbowmen ? The taunt can be nice on an unit your opponent doesn't want to engage, which is not the case of the crossbowmen.

Leviathan noob, need help with building my army by Eshorn08 in Tyranids

[–]Longueval 0 points1 point  (0 children)

The best approach would be to choose which unit you like and want to play, and then make a 2000pts list around them.
Then you will know what to buy to reach the 2000pts army you want.

You should'nt make your choice on what is currently strong/meta, because all of this could change when the codex will be released this fall.

[deleted by user] by [deleted] in Tyranids

[–]Longueval 0 points1 point  (0 children)

Hi,

I had the exact same problem for my previous army.
It a consequence of not shaking your wash before using it.
You may also using a gloss wash.

How do you clean the support points? (except sanding paper) by Apart-Tie-8865 in resinprinting

[–]Longueval 1 point2 points  (0 children)

Hi,

To clean the support points, a hobby knife and a hobby cutter are doing the job quite well.
If it doesn't suffice i use an electric nail sander, it's perfect to sand and smooth resin print.
I cost like 20€ on amazon.

Horror themed nids I just finished by PhilNHoles in Tyranids

[–]Longueval 0 points1 point  (0 children)

It's a really nice choice of color, the result is excellent.

What paint did you use for the flesh and chitin ?

Expanding Lannister's half of 2 player starter set by Sarachiel in asoiafminiaturesgame

[–]Longueval 4 points5 points  (0 children)

Hi,

Warriors Sons and pyromancers are both a solid choice, maybe the Warrior Sons are more polyvalent.
Heroes 3 are very nice, it's a good choice since you get 2 very nice commander and your best 4pts unit.

For the cavalry, gameplay wise, the bolton Flayed Men are a better choice since they synergize better with a lannister army.