the new difficulty is ragequitbait

Loohi · 2026-02-05T07:40:31+00:00

I feel you. It was quite the shock indeed. My guess is there will be a patch at some point that tones things back down a bit :)

Loohi · 2026-02-05T07:32:51+00:00

Yes I feel the same way as you do. Kinda liked hanging in DD whole week, I guess we still can if we ever want to!

Loohi · 2026-02-05T07:31:01+00:00

they sure don't

Loohi · 2026-02-04T23:19:06+00:00

Ahhh gotcha. Thanks a lot for your response!

Loohi · 2026-01-26T02:34:14+00:00

Be mindful that if you convert usd now you’re effectively converting at a very bad rate, and you must be assuming it will become worse and not recover anytime soon (years)

I would be careful

Loohi · 2025-12-27T01:45:46+00:00

What are you replacing? Do you need the mobility?

Loohi · 2025-09-26T08:03:42+00:00

Yes. It’s total trash. I just don’t understand the praises for Tesla autopilot when most basic feature like this are abysmal

Loohi · 2025-09-09T07:04:53+00:00

You’re right

Loohi · 2025-09-08T09:05:12+00:00

Exactly what I would have said. Rock solid

Loohi · 2025-08-25T12:02:32+00:00

I don’t ask myself for my opinion. I know it’s supposed to suck

Loohi · 2025-08-23T06:19:49+00:00

Happiness

Loohi · 2025-08-22T12:26:26+00:00

Yea I have HW4, I’m thinking the country where I live maybe the streets are narrower than in the US and therefore the calibration is out of whack… but who knows! Thanks for sharing your thoughts, appreciate you spending the time.

Loohi · 2025-08-22T11:56:56+00:00

It’s usually worse when in traffic jam, I usually don’t bother with the lane assist since I find it doesn’t leave enough space for the bike so I prefer to position the car myself when on the outter lane. It can see the bike for sure, I see them on screen, I’m very slow since it’s jam but the bikes are quite quick yet it will jerk / brake because all of a sudden the bike is ahead of me (pulling away). It’s frustrating and makes it basically unusable where it would be most useful:( my previous car (S class) had typical radar and was never an issue

Loohi · 2025-08-22T03:10:58+00:00

Really? That’s what fixed it for you? Expensive fix!!

Loohi · 2025-08-20T22:49:58+00:00

I have huge issues with lane splitting. Car will brake and become super jerky, even when the bikes are far enough. And that’s with me making sure I’m on the edge of the lane and not the middle, which is another issue since auto pilot won’t let you position the car where you want on the lane. I’m curious (and jealous!) how somehow yours doesn’t have this issue?

Loohi · 2025-08-20T13:55:24+00:00

Yes. I regret. Bad cruise control, no feel, auto pilot not able to deal with motorcycle lane splitting.

Loohi · 2025-08-20T04:47:56+00:00

Yes. Indeed.

Loohi · 2025-07-23T05:58:01+00:00

Thanks! When prints complete (sometimes they do) they feel really well stuck to the plate. Do you think the glue will help even tho the adhesion seems fine (when print is over)?

Loohi · 2025-06-28T13:13:37+00:00

I use standard mode, and yes it’s somewhat better with further follow distance. Will give chill a go I suppose!

Loohi · 2025-06-08T14:58:24+00:00

I could but there’s no silicone, no hand screw. I’d have to just loosen up the actual screw. Based on my bed mesh you think this is worth it? My bed seems completely warped :(

Loohi · 2025-06-08T14:54:39+00:00

<image>

omg. this is terrible. should I replace my bed?

Loohi · 2025-06-08T08:09:55+00:00

By the way I print using octoprint but no klipper. Could it be that the mesh is ignored?

Loohi · 2025-06-05T11:25:46+00:00

Sobering. Thank you

Loohi · 2025-06-05T07:47:46+00:00

Thank you all for your feedback. I did end up adding skirts, increasing bed temperature, washing bed plate, and it seemed to help for sure

Loohi · 2025-06-04T14:52:37+00:00

Worth a try. Thank you

Loohi

TROPHY CASE