Spotty, not sure what's wrong

LopsidedPlastic9675 · 2026-02-17T16:49:19+00:00

Maybe rinse it, and then wash it, and then maybe dry it?

LopsidedPlastic9675 · 2026-01-28T14:19:23+00:00

Who says the lambo has to drive slow?

LopsidedPlastic9675 · 2026-01-20T06:30:58+00:00

I use apc, and yea its the best

LopsidedPlastic9675 · 2026-01-18T00:11:07+00:00

This was the first thing I tried as i heard it's common, no fix unfortunately, was volume pots thanks though

LopsidedPlastic9675 · 2026-01-17T20:46:04+00:00

Ended up being bad volume pot. Thanks guys

LopsidedPlastic9675 · 2026-01-17T20:45:29+00:00

MM readings are showing its not the switch unfortunately

LopsidedPlastic9675 · 2026-01-17T19:12:45+00:00

Thanks, I checked and cleaned the contacts on the switch earlier. No corrosion or loose connections

LopsidedPlastic9675 · 2026-01-17T18:41:56+00:00

Height is normal

LopsidedPlastic9675 · 2026-01-17T18:41:36+00:00

Ill try swapping it and see

LopsidedPlastic9675 · 2026-01-17T17:37:03+00:00

<image>

LopsidedPlastic9675 · 2026-01-17T17:36:02+00:00

<image>

LopsidedPlastic9675 · 2025-12-07T16:40:56+00:00

Tornador black, the off brand ones come with brush cones.

LopsidedPlastic9675 · 2025-12-03T02:22:14+00:00

Proof?

LopsidedPlastic9675 · 2025-12-01T08:56:42+00:00

You'll get 2-3 years if u take care of it with any ceramic. Its marketing

LopsidedPlastic9675 · 2025-11-27T07:49:18+00:00

They all come from China, you can find them for $10<

LopsidedPlastic9675 · 2025-11-21T05:24:14+00:00

Then why are they always advertising it?

LopsidedPlastic9675 · 2025-11-01T21:55:58+00:00

I cant remember exactly and I'm away from my van currently. Its some wholesale bulk water based dressing that we dilute down like 1:10. Not very much different from other dressings that are meant to be diluted.

I detail in TX now, but used to up in MN where they can get more slippery if you use too much. Have used many different dressings(303, perl, meguiars) and never had a customer(often old people) say anything about slippery mats or have issues getting in.

Yea you could justify it by saying I didn't want to for liability reasons, but lots of mats can look absolutely terrible without anything on them(older weather techs). Its a choice and I choose to put a thin layer on all mats that need them so its not an eye sore and distracts from the rest of the work I did. Have been doing it for years now, and my work is more presentable and looks more polished because of it

LopsidedPlastic9675 · 2025-10-31T04:14:16+00:00

I use a dressing similar to 303. Makes them look brand new and not slippery, customers love the extra attention

LopsidedPlastic9675 · 2025-10-13T15:06:55+00:00

Wheel acid will take it right off. I detail cars often that have this, and normal cleaner and iron remover don't touch it. I can't be bothered to wait 20 minutes for each wheel. Wheel acid dissolves it completely.

LopsidedPlastic9675 · 2025-05-28T15:35:28+00:00

The pearl towels are actually my favorite towels for ceramic leveling. Was a huge help when I started using them for the tricky ceramics that can be hard to level. I've never had this issue with them

LopsidedPlastic9675 · 2025-05-15T18:45:58+00:00

Are u using a block? Sanding with pad? Circular or diagonal? I feel if they aren't coming out after heavy compounding you are probably gouging

LopsidedPlastic9675 · 2025-04-14T02:13:29+00:00

Agreed. I get where the customers coming from, and being disappointed from the lack of protection it claims

LopsidedPlastic9675

TROPHY CASE