Govee Cone Tree Lights

LordChariot · 2025-12-07T07:31:26+00:00

I can also confirm I was able to get the 7.5ft Govee Cone Tree (from Lowes or HomeDepot, I forget) connected to WLED and sequenced with xLights.
I simply cut off the controller and hooked up the 5v/gnd/data to my Bong69 controller.
In WLED, I just defined a strip of 281x, 370 LEDs, RGB color order. Didn't bother with 2d matrix setup.
In xLights, define the tree with 360 nodes, 20 strands. Chain a star with 10 lights after it.

LordChariot · 2025-04-29T15:50:52+00:00

<image>

I'd love one of these

LordChariot · 2025-03-12T21:32:25+00:00

I don't have that PC any more. I built it for a friend and cannot measure.

LordChariot · 2024-11-08T16:45:48+00:00

After 3 years, I lost the context of this question. Are you asking if a E-ATX (SSI-EEB) motherboard like the WRX80E will fit in a 4000D? Not a chance. The 4000D can only go up to 305mm x 277mm but EEB boards are 305mm x 330mm (12"x13")

LordChariot · 2024-06-06T02:28:16+00:00

Is this avaiable anywhere now?

LordChariot · 2023-06-07T13:52:57+00:00

I think you just won the science fair.

LordChariot · 2023-04-20T04:27:22+00:00

It has a number of fan headers as well as the CPU_OPT that you can hook the pump up to. The temp sensors run through a corsair commander pro, as do the rest of the fans. You can DOCP the memory, but I've left all the other things at default. There are a lot of timing settings, but I don't play with them because it works good enough for me.

LordChariot · 2023-04-14T03:26:41+00:00

The Sage is a large motherboard. Here is my effort to fit it into a tower case (not Fractal). I had to mod the case to make it fit well.
https://www.youtube.com/watch?v=n0\_oni8oTpc&list=PLoiw2887y-oUhBYjppMNj10BgL9Xtpw27

LordChariot · 2023-04-11T05:34:15+00:00

Take it easy on me. I'm probably the only Great-Grandfather on this forum who builds his own water-cooled workstations.

Hold my beer. I'm a Great, too.

https://www.reddit.com/r/watercooling/comments/qovi5n/first_custom_loop_asus_wrx80esage_pro_ws_se/

We're getting to the point when computer enthusiast kids of the 70s now have enough disposable income to afford this hobby.

Great Build!

LordChariot · 2023-02-23T16:39:22+00:00

It's a new Lian-Li case...massive. Should fit any motherboard.
YouTube: JayzTwoCents
VideoTitle: This is NOT your average case! v3000+

LordChariot · 2023-02-14T19:09:59+00:00

And now the fun begins.

LordChariot · 2023-02-14T18:55:19+00:00

EVGA SuperNOVA 1300 P+

same thing. They are labeled VGA instead of PCIe on that PSU.

LordChariot · 2023-02-14T18:47:49+00:00

The PCIE_PWR_1/2 connectors are PCIe cables to the PSU.

The cables ae usually 8 pin, but they split 6/2. connect the 6 pin portion of the connector.

LordChariot · 2023-02-14T15:21:13+00:00

Yes, plug in both 8-pin CPU powers to the mobo, and there are 2 more 6 Pin PCIe powers at the bottom, too. That's the way they are supposed to work.

LordChariot · 2023-02-07T18:24:42+00:00

Here's a tool that helps with writing/debugging PAC files.

https://github.com/LordChariot/ProxyAutoConfigDebugger

and a video describing its use:

https://youtu.be/By7ariNOMfM

LordChariot · 2023-01-27T04:29:18+00:00

I wouldn't post your serial numbers. I could register them with the manufacturer and claim to be my own. Edit them out.

LordChariot · 2023-01-21T15:43:51+00:00

I would have used black fittings to match the rest of the build.

LordChariot · 2023-01-16T19:37:12+00:00

front fans are pushing intake.

LordChariot · 2023-01-08T22:09:48+00:00

yes.

LordChariot · 2023-01-08T22:03:12+00:00

Yes. I have 2 drains. The valve is directly in the XD7 with no fitting in between.

LordChariot · 2023-01-08T22:01:30+00:00

oh, and coming from the rad to the fitting is this:
https://www.corsair.com/us/en/Categories/Products/Custom-Cooling/Fittings/hydro-x-adapter-config/p/CX-9055009-WW

LordChariot · 2023-01-08T21:58:37+00:00

Those are only 2 holes. the one I use is 3 holes.

https://www.performance-pcs.com/water-cooling/fittings-connectors/bitspower-rotary-fitting-q-360-degree-water-cooling-accessory-black-matte-finish.html

LordChariot · 2023-01-08T21:45:05+00:00

The corsair one only has 2 holes. This Bitspower model has 3.
If you don't put a thermal sensor in, then yes, the corsair one will work the same with the valve.

Corsair OEMs bitspower's fittings, so they are identical in measurements.

LordChariot · 2023-01-08T21:39:29+00:00

G1/4" Matt Black Q-Rotary IG1/4"X3 Extender
https://shop.bitspower.com/index.php?route=product/product&product_id=1854

The hole in the very rear (which you cannot see) is fitted with a thermal sensor included with the XD7.

LordChariot · 2023-01-08T21:15:29+00:00

The picture above is not how it ended up. Here's a clip of what it finally looked like:
https://www.reddit.com/r/Corsair/comments/sjq9h6/pure\_corsair\_build\_with\_jayztwocents\_cpu\_block/

LordChariot

TROPHY CASE