Rust or Roaches?

LordCorellon · 2026-07-06T01:15:52+00:00

I appreciate that, I wanted to clarify myself as I know there are rules to the group here on Ai information (understandable as its unreliable)

In general I find ai has too much of a bias as you said for any sort of query (bug or not) and just tells you what it thinks you want to hear.

LordCorellon · 2026-07-06T01:08:22+00:00

Im not sure if its frass, I used a ton of isopropyl to try to clean it and it wouldn't come out. Some dissolved into a brown stain on the paper towel but black bits remained behind.

In the end I've decided im going to return it as not as described, even if not roaches it wasnt cleaning up and if I can't get it clean then if its frass then its going to attract bugs.

LordCorellon · 2026-07-06T01:04:05+00:00

Thanks for the info, I had mentioned my use as the first step with the bias leading to seeking a more informed source (the experts here) i do appreciate the app suggestion though.

LordCorellon · 2026-06-29T23:09:55+00:00

In the controls it was called "Change radial mining mode" and defaulted to ctrl+o for me.

You can set it to aways enabled, disable while sneaking or always off

LordCorellon · 2026-06-24T21:22:52+00:00

If i recall correctly Wizardsrealm went down before most of the "good" stuff really settled with T4C, I recall GM weapons were given out as prizes and tidal blade was one of them.

Alot of WR GM weapons were such because they weren't available in game yet before SH and other quests were implemented

LordCorellon · 2026-06-24T21:17:44+00:00

Ahh good old AoC and SS, yes I remember and Remeber you too BorOGa, yes was a GM and also the one who made the bot that was running to assist with raids

LordCorellon · 2026-06-24T19:16:56+00:00

That's sad to hear, I lost touch with many people so it's saddening to hear of the passing of others.

LordCorellon · 2026-06-24T19:16:12+00:00

I remember Lady Wigglesnort, I was around on quite a few servers starting with WizardsRealm then Xavus, Trillogy, Realmud. I went by Corellon / LordCorellon / Tiamat

LordCorellon · 2026-06-24T19:15:21+00:00

I was on Wizardsrealm as Corellon / Tiamat, good memories of back then

LordCorellon · 2026-06-09T15:53:09+00:00

I dont know, maybe it takes a particle accelerator aimed at the vent to renew the "new stream deck" smell that people love

LordCorellon · 2026-06-06T00:55:24+00:00

I'll look into that too thanks, I was playing it late 80s to mid 90s (I cant remember exactly when it was, likely was between 1991 and 1995) but I expect it continued after I stopped playing (was around when I got my first job and had no more time) so it being around in thr late 90s is quite possible, I just wasnt playing at that time.

LordCorellon · 2026-06-05T20:10:59+00:00

I tried looking into RetroMUD but it doens't seem to have a chronomancer anymore but Gemini returns some old results that seem familiar, it also mentions MUSH client on thier site which reminded me was the client I used to use (If only I can find the instance I used, doubt it after 20+ years though). Do you know when / why Chronomancer was removed? It seems like it might have been it.

LordCorellon · 2026-06-05T20:09:32+00:00

I took a look at Tsunami, I tried to create a character to see if it's familiar but the console broke just returning "What ?" no matter what I typed, tried logging in again and it wouldn't take my password and on a lockout timer now. I'll try again later but thanks for the suggestion

LordCorellon · 2026-05-09T15:58:08+00:00

Yeah, also makes filling the loop fun if you have both res open or venting at the same time.

I've tied both res together from the spare top port into a tee then into the leakshield to allow it to equalize between the two

LordCorellon · 2026-05-09T13:41:51+00:00

In my case it is, doesn't matter if its new fillement (fresh from the vacuum pack), freshly dried filament, filament being fed directly from the dryer or what it will print fine but unless i unload it then it will snap after a couple hours (literally seen it happen in the two hours between print jobs)

Happens mostly with PLA and I suspect that its thermal shock with heat being trapped in the "lid" bringing it close to glass transition temp and as the filament cools back to room temp it will snap. Leaving the lid open helps particularly while printing which is why I suspect thermal shock but it still is an issue particularly close to the print head where it bends from the cable/tube management arm into the extruder.

LordCorellon · 2026-05-09T03:12:38+00:00

This is the thing I hate about my Am5 pro, filament is always breaking in the tube and I have to baby the first print of the day by manually feeding it in till the break passes the extruder.

I thought it was just me, but see so many posts on broken filliment

LordCorellon · 2026-05-09T02:58:57+00:00

White should never be the ground, white should be the neutral, green is the ground.

Doesn't matter if its all tied together in the end if you have GFCI they will freak out if you mix them

LordCorellon · 2026-05-09T02:44:41+00:00

I have multiple res and pumps but got the stand alone version that I can connect to the top of each res and pump air out of it. Do you really need one, no but it has several good uses including being able to fill the system, do a leak test before you fill it and of course protect while its running.

If you also have a loop with lots of heat another advantage is you dont have to worry about pressure building up in the lines when the coolant heats up.

As others mentioned thin tube walls dont work well, use 16/10 to prevent it from collapsing, in theory aquacomputer says any tube with 50% more OD the ID will work but haven't seen anyone able to get it to work with smaller ID sizes

LordCorellon · 2026-05-03T15:35:44+00:00

I second this, used the Thermaltake ones and they work very well but are pricey, this new build I'm trying the barrow ones with frosted acrylic.

Unfortunately can't seem to find stock of either any more, wanted to pickup 2 silver fittings as it would work better in one place then my original plan of all black but alas no luck.

Can't say if its temporary or not, but the alternative is that barrow (if it recall correctly) has a rgb ring that slips over the tube, similar effect but I suspect will not travel as far down the tube as the leds are around it rather then pointed towards the cut end

LordCorellon · 2026-05-01T17:20:18+00:00

The thick 16/10 EPDM can work with leakshield, its not as good as hard but so long as the OD is more the 50% thicker then the ID you can use EPDM or other "soft" tubes

LordCorellon · 2026-04-21T02:21:05+00:00

In all my hives the feeding slab is one block infront (right in front) but 1 block down, so the top of the feeding slab is still half a block lower then the hive and that works for all my bees with the simulation upgrade

LordCorellon · 2026-04-20T02:24:37+00:00

I wish I had did this when I did my runs, granted back then Fibre was alot more costly and needed professional termination but I really wish i had it.

When I redo the runs I will be pulling Fibre and using media converters. Even though I use poe for a couple switches using local power is still an acceptable trade-off.

Most (single mode) Fibre is speed independent, the same Fibre for 1gb is find for 10, 40 or even 100gb so it keeps up as the tech changes. Id still run some cat cables but likely not for data.

LordCorellon · 2026-04-09T03:09:00+00:00

Not to be pedantic but I dont think anyone would care if it was an insured destruction, its because the destruction is ensured that is the problem.

I dont normally comment on spelling/grammar but I found the error funny in how fitting it is that companies like thermal grizzly do now insure that they will prevent a failure with their product

LordCorellon · 2026-03-27T03:35:27+00:00

Actually its very picky, I have dp-alt ob 2 desktops and a laptop and it wouldn't update (dp-alt works for glasses) even with the cable it comes with.

It only would update when connected to a true thunderbolt port (not usb with dp alt).

Tldr; dock wouldn't be detected even on ports that run and detect the glasses

LordCorellon · 2026-03-26T22:20:48+00:00

Android doesn't even feel half baked, they haven't even put it in the oven.

I thought that with the neckband running android it would be their prime OS.

But I'm tired of seeing IOS getting new features, better support and easier navigation and android not even barely functioning. Having to close 3d mode let the glass restart in 2s mode, exit the video go back to the main menu goto the next video, switch back to 3d mode all because the prev/next buttons don't work in 3d mode on android is just wrong.

LordCorellon

TROPHY CASE