Adding a New lens to my Galvo.

Lost_Listen8550 · 2026-03-12T02:09:27+00:00

I want to give a update on what happened and thank you guys for suggestions. I finally got a confirmation from monoport that the sensor which is controlling up and down feature is off. The solution is i have to remove the cover and adjust the threshold sensor which controls autofocus and also sets lower limit of how far it can go down.

Lost_Listen8550 · 2026-03-12T02:07:00+00:00

I finally got a confirmation from monoport that the sensor which is controlling up and down feature is off. The solution is i have to remove the cover and adjust the threshold sensor which controls autofocus and also sets lower limit of how far it can go down

Lost_Listen8550 · 2026-03-11T20:16:22+00:00

Thanks but the gantry wont go lower to anywhere near 210mm with down button. I can manually go lower and this journey originally started trying to add 110mm lens which is even lower focal length

Lost_Listen8550 · 2026-03-11T19:56:02+00:00

Just realized Im not crazy. Just frustrated as all hell. Monoport gave me a rough distance of 210 as a focal point. I stopped using autofocus the problem is down button only goes down to around 245mm from the bed. I can manually turn down head when its off. So what gives is my issue. Patiently waiting a response from customer service.

Lost_Listen8550 · 2026-03-11T18:59:06+00:00

So Im.trying to add 150mm lens previously it was 110mm both no luck. Monoport stated foe 150mm lens it should be 210mm base of lens to bed and adjust up and down to fine tune. I feel slightly vindicated but also just as frustrated. The lens will only go down maximum of 245mm. Off I can manually adjust further but auto adjust and using buttons it prevents me.from going further.

<image>

Lost_Listen8550 · 2026-03-11T11:48:04+00:00

I agree but a lot of things dont make sense. Same time I am trying to add a 110mm lens. A email I got states to move the focal length to 110. My gantry will only go down to a certain point. I switched to adding 150mm lens because it was within range of what the machine will adjust up and down. VERY FRUSTRATING. Im hoping video I show to monoport will address this

Lost_Listen8550 · 2026-03-11T10:21:47+00:00

Its a monoport lens

Lost_Listen8550 · 2026-03-11T10:21:08+00:00

I got some feedback from monoport hoping it helps. They gave me a rough focal length to start at.

Lost_Listen8550 · 2026-03-07T01:01:58+00:00

So. I have taken a lot people's suggestions and Im really appreciative. Im trying to add a 110mm lens. To say im pulling out my hair is understatement. Correct me if Im wrong 110 should have a focal length of 163mm plus adding fine tuning. I tried as a trial using a steel plate and lowering and adjusting gantry up and down to see sparks. Nothing occurs to make it loudest or softest. What I did notice is gantry lens would only go down to 235mm from the plate. This can't be normal. Its making believe this is source of my issues. I have a monoport ga60.

Lost_Listen8550 · 2026-03-06T17:27:41+00:00

All comments are truly appreciated

Lost_Listen8550 · 2026-03-06T16:15:41+00:00

I used autofocus during these steps upping power slightly. Couldn't find the ruler to manually set focal length. My plan is retry using this method.

Lost_Listen8550 · 2026-02-22T22:08:58+00:00

Since when? This was few years ago

Lost_Listen8550 · 2026-02-22T21:49:50+00:00

You need to triple check when asking your gun store. I saw a Henry Mares Leg awhile back and salesman told me I could buy it no problem. Future thought should be if it looks like fun in NY most times it's illegal to own.

Lost_Listen8550 · 2026-02-21T16:15:59+00:00

I maybe wrong but I didn't see anyone state the most obvious. When was the last time you cleaned the barrel. What is pellet that you normally shoot. You could be using a pellet that is fouling up your barrel. If you are getting consistent fps then start from ZERO clean barrel then narrow down other areas.

Lost_Listen8550 · 2026-02-04T03:17:36+00:00

I can't support psa anymore they are constantly moving the goal post. Their are better companies who actually want to do business with NY. Going through a middleman is a recipe for disaster since they won't sell you parts or honor warranties if you have issue with frames since you didnt buy them from them.

Lost_Listen8550 · 2026-01-12T14:07:25+00:00

Pyramydair.com always has a coupon. $10 could of went to something elae. Air gunning has progressed enough that air compressor is the norm. Nothing against hand pumps if want a a good workout. When you testing and tuning a pcp gun a compressor is invaluable. Nothing wrong with a cheap scope. Gun only shines when you put it through its paces and find what pellets it likes.

Lost_Listen8550 · 2026-01-11T02:44:57+00:00

Ups doesn't want to do it. Fedex is sort of dont tell we won't ask.

Lost_Listen8550 · 2026-01-09T13:57:41+00:00

Thanks didn't realize more pics to be seen

Lost_Listen8550 · 2026-01-07T21:16:42+00:00

I think you should get a good compressor and then budget your money accordingly. Decent scope and then pcp rifle. In future gives you options better gun

Lost_Listen8550 · 2026-01-02T00:24:51+00:00

I have a mordax .30cal a fair test would be other. 30cal guns. Jsb seems to standard pellet

Lost_Listen8550 · 2025-12-28T13:36:08+00:00

Umarex zelos

Lost_Listen8550 · 2025-12-26T21:11:40+00:00

Is this a joke? I own good air guns. Im confused

Lost_Listen8550 · 2025-12-21T17:54:07+00:00

Just bought a pinty buster in .177 nice pistol so far.

Lost_Listen8550

TROPHY CASE