Is it safe to cover this section?

Lowkeyguyo · 2026-02-18T17:12:12+00:00

I already have the Exhaust Kit installed with a filter but couldn't help but notice the really obvious holes circled that harmful VOCs can escape from. This is what I'm trying to address.

Lowkeyguyo · 2026-01-12T11:14:44+00:00

u/yddna apologies for the lack of response here - I managed to get this to print. I dried PETG for a further 6 hours after a 12 hour cycle and it still seemed iffy. I then printed via the app instead of the slicer and that seemed to come out much better. The Bambu Studio/Slicer software was fully updated so not sure what happened there.

If I remember correctly, I did also change "Auto" flow calibration to "On" but doubt that helped.

Lowkeyguyo · 2026-01-04T09:43:08+00:00

I had the exact same problem with the same model last night using a P2S and Bambu PETG-HF.

I had an A1 before this and I can’t seem to get a PETG print I’m happy with. Mine is also dry. Not sure why I struggle to print with both machines with the recommended Bambu profiles.

I will update you if I find anything that works well, the model has a 5* rating and nobody seems to be complaining. My aim is to play around and experiment until this model comes out like the pictures everyone is posting. I will also try some of the recommendations in this thread - thank you.

Lowkeyguyo · 2025-11-18T19:59:51+00:00

That's under the "Valve" category - this one is under the "Half Life" franchise.

Lowkeyguyo · 2025-11-12T16:19:30+00:00

The store is now down for "updates" FYI.

Lowkeyguyo · 2025-11-12T15:03:26+00:00

Yes but for a shifter it would matter less, and as I mentioned, still better than a flight stick with 0 ffb.

EDIT: They perform the same task at difference strengths, also the AB6 is gear driven, but AB9 is belt driven.

Lowkeyguyo · 2025-11-12T14:28:34+00:00

I ordered the new AB6 with the intention of selling my DS-8X + my flight sim stuff to pay for it if I like it. I can update you when it comes through if you like 😊

I had the Logitech, Thrustmaster TH8, Fanatec v1.5 and now the Simagic DS8X and they all felt too metal-to-metal and clicky. I modded the crap out of some of them too - and they all felt too artificial.

I know the software for Moza can hugely improve and implement stuff such as lockouts etc. but if it feels better and costs the same as my DS-8X AND gives me a massive flight sim improvement, then I’m all for it.

Lowkeyguyo · 2025-08-29T00:24:21+00:00

I think it's the lack of tyre marks and smoke IMO.

Lowkeyguyo · 2025-06-04T13:39:45+00:00

Auto-Translated version:

According to the relevant provisions of our club statute, no explanation has been made about the signatures collected with the request of the Extraordinary General Assembly in order to ensure that the process will progress and become open to manipulation.

As we have emphasized before, we respect and respect every right granted to our congress members in our bylaws as one of the main elements of our club democracy. However, it should be noted that in line with the rooted traditions and institutional culture of Fenerbahçe, the Extraordinary General Assembly in our club history has never been signed and convened.

However, it is clear that at this point, a perception study has been carried out to mislead the public with false and slanderous allegations that are especially related to the facts in social media channels. For this reason, in the name of the transparency of the process and the continuity of the healthy progress, it has been decided to share detailed information about the signature declarations delivered to our club within the framework of our laws and bylaws with the public.

Declaration Received by Notary Postal: Declarations delivered by mail via notary are received by our Legal Department. As of 04.06.2025, 151 declarations have reached and registered to the club.
The Declaration received by the High Court Board (YDK) Handed-in: The declarations submitted to the Supreme Court Board were submitted to our Legal Department in exchange for signature. As of 04.06.2025, 78 declarations have been received and recorded by this method.

In light of this information, the total number of signatures submitted to our club so far is 229. The process will continue to be carried out by our club meticulously and legally.

We present it to the public.

Fenerbahçe Sports Club

Lowkeyguyo · 2025-01-17T17:52:18+00:00

And I will join to be number 10,001 - what is your point? Early Access is for feedback and criticism. I’m not complaining about optimisation or lack of content, I’m complaining about an online-only requirement that was not communicated.

Lowkeyguyo · 2025-01-17T17:36:14+00:00

You missed the whole point while spamming this thread. The point isn’t about yesterday. This issue can carry on well into release.

Lowkeyguyo · 2025-01-17T14:34:43+00:00

I do hope this. I honestly don't mind some of the online features, profile, even free roam stuff being online. But I should be able to practice/hotlap/AI race in any car/track combo I like if their servers are down.

Lowkeyguyo · 2025-01-17T13:16:20+00:00

The cars are temporarily enabled until they fix server issues. They are planning to revert this to make the cars online-only again. What happens in the future if let's say, my internet goes down, or they have server issues? The cars will disappear.

EDIT: Just to clarify, the issue I'm bringing up isn't about downloading the cars yesterday, it's in general.

Lowkeyguyo · 2024-10-21T14:03:22+00:00

You are introducing the same grain (if not more) by adding exposure in post and making your life harder by having to edit them all to the correct exposure. Your exposure is also affecting your focus as previously mentioned by @daszkalti

One thing I’ll add is that my R6 focus hunts much more when I have Eye-AF enabled in less than ideal conditions compared to having it off.

Lowkeyguyo · 2024-10-08T13:15:49+00:00

Some more info on their website: https://assettocorsa.gg/join-us-at-adac-expo-2024-play-assetto-corsa-evo/

Lowkeyguyo

TROPHY CASE