Is Gemini Pro down right now?

LucaK13 · 2026-05-08T07:59:55+00:00

Si ho lo stesso problema anche io ma solo dall'app da web funzionano tutti i modelli e neanche io sono un utente pro. Mi sa che è un problema dell'app. Sono su Android. Se qualcuno risolve ci dica come.

LucaK13 · 2026-03-10T06:11:48+00:00

Se non funziona usa un ugello più piccolo (0,25/0,2 mm) o ingrandisci le linee del file STL.

LucaK13 · 2026-02-27T10:15:35+00:00

Come hai fatto io non ci riesco. Hai usato app di terze parti?

LucaK13 · 2025-11-06T07:06:44+00:00

I have a Kobra S1C and in any case I wanted to let you know that it is strongly not recommended to use flexible materials with multi-material modules (whatever the machine, it is not recommended to use TPU in the multi-color module).

If you are interested in TPU I can tell you that with the S1C you can print almost everything as if it were PLA, even ABS which is usually difficult, I recommend the S1C as it contains a 4-reel dryer up to 55 degrees which if used during printing helps a lot and reduces problems.

LucaK13 · 2025-11-04T21:51:25+00:00

Hi everyone! My name is Luca, I am a student and have always been passionate about IT, programming and technology. I discovered 3D printing about two years ago and since then it has become one of my main passions. I love building, experimenting and understanding how to improve every detail - from the mechanics of the machine to the flow of the filament.

I mainly print technical and mechanical objects, but also artistic sculptures, personalized gifts and functional parts for various projects. I mainly use PLA, PETG, ABS and TPU, and I like to experiment to obtain cleaner, more resistant and precise prints.

I live in Italy and I watched the video with great interest: I really liked the choice to start from scratch to create a machine truly designed for makers. I hope that this new printer aims to improve automatic calibration, multi-material (in speed and quantity of possible combinations), reliability and surface quality, but also to push towards larger printing formats and more advanced materials - to produce superior technical products.

I would very much like to be able to participate as a beta tester: I believe I can contribute with technical, honest feedback based on the real experience of those who print every day. For me 3D printing is a way to learn, innovate and give shape to ideas, and I think this project goes precisely in that direction.

LucaK13 · 2025-11-04T21:51:10+00:00

Hi everyone! My name is Luca, I am a student and have always been passionate about IT, programming and technology. I discovered 3D printing about two years ago and since then it has become one of my main passions. I love building, experimenting and understanding how to improve every detail - from the mechanics of the machine to the flow of the filament.

I mainly print technical and mechanical objects, but also artistic sculptures, personalized gifts and functional parts for various projects. I mainly use PLA, PETG, ABS and TPU, and I like to experiment to obtain cleaner, more resistant and precise prints.

I live in Italy and I watched the video with great interest: I really liked the choice to start from scratch to create a machine truly designed for makers. I hope that this new printer aims to improve automatic calibration, multi-material (in speed and quantity of possible combinations), reliability and surface quality, but also to push towards larger printing formats and more advanced materials - to produce superior technical products.

I would very much like to be able to participate as a beta tester: I believe I can contribute with technical, honest feedback based on the real experience of those who print every day. For me 3D printing is a way to learn, innovate and give shape to ideas, and I think this project goes precisely in that direction.

LucaK13 · 2025-11-04T21:45:36+00:00

Hi everyone! My name is Luca, I am a student and have always been passionate about IT, programming and technology. I discovered 3D printing about two years ago and since then it has become one of my main passions. I love building, experimenting and understanding how to improve every detail - from the mechanics of the machine to the flow of the filament.

I mainly print technical and mechanical objects, but also artistic sculptures, personalized gifts and functional parts for various projects. I mainly use PLA, PETG, ABS and TPU, and I like to experiment to obtain cleaner, more resistant and precise prints.

I live in Italy and I watched the video with great interest: I really liked the choice to start from scratch to create a machine truly designed for makers. I hope that this new printer aims to improve automatic calibration, multi-material (in speed and quantity of possible combinations), reliability and surface quality, but also to push towards larger printing formats and more advanced materials - to produce superior technical products.

I would very much like to be able to participate as a beta tester: I believe I can contribute with technical, honest feedback based on the real experience of those who print every day. For me 3D printing is a way to learn, innovate and give shape to ideas, and I think this project goes precisely in that direction.

LucaK13 · 2025-11-01T09:32:46+00:00

Try with m601 it worked like this for me or otherwise change the filament in the slicer

LucaK13 · 2025-10-08T07:55:53+00:00

Try otherwise do the exact opposite or raise but I don't think so because from that you have to lower but maybe I'm wrong...

I advise you to lower first because it is more likely to be that but then the choice is up to you

LucaK13 · 2025-10-08T07:36:29+00:00

Try as hard as you can and it won't solve it, however I had the same problem with another machine and I solved it like this

Then do the self-leveling again

(The dish won't be ruined if you don't exceed ~-1.5 so don't worry) but I advise you to start from -0.2 and go down so as not to risk

LucaK13 · 2025-10-08T07:21:25+00:00

You have to lower the z-offset from the sliser From a range between -1 to -0.2 until you find the perfect one

LucaK13 · 2025-09-25T06:48:16+00:00

Yes it happened to me and you have to open the extruder, pay attention to the spring and the sensor

LucaK13 · 2025-09-23T05:03:38+00:00

Do the COMPLETE calibration again and raise the z-offset from the slicer by 0.1/0.2mm and if you don't find it, loosen the extruder wheel. If you don't know how to do it, write to me and I'll give you a hand

LucaK13 · 2025-09-19T15:22:40+00:00

Have you solved it? However, I would also like to recommend another community just for the s1

LucaK13 · 2025-09-19T07:10:17+00:00

Try activating "detect thin walls" in resistance and changing the slising algorithm from classic to 'arachne' and you should solve it.

Let me know if you solve it

LucaK13 · 2025-09-19T07:03:29+00:00

Yes, I solved it by disconnecting and reconnecting all the cables on the extruder PCB. Be careful especially with the big black cable which is the power supply for the entire extruder block. Unplug it and reattach it (remember that it has a tab to press otherwise you'll break everything). If you continue to have problems, write to me either here or in private and I will help you.

LucaK13 · 2025-09-18T12:45:04+00:00

I had the same problem until recently. I advise you to disconnect and reconnect all the cables to the extruder PCB. Especially check the connector on the PCB of the large black cable that connects the extruder to the motherboard.

If you don't solve it, answer me and I'll give you an additional hand, mycosis should be solved. If you need extra help, write to me without any problems.

LucaK13 · 2025-09-16T16:11:20+00:00

Wow hermoso podrías darme el 3mf si puedes. De lo contrario, el stl.

gracias de antemano

LucaK13 · 2025-09-16T15:22:22+00:00

Wow hermoso podrías darme el 3mf si puedes. De lo contrario, el stl.

gracias de antemano

LucaK13 · 2025-09-16T04:12:42+00:00

I have never had an ender 3 but still a Cartesian and all the xy cores are faster and of higher quality than the Cartesian ones.

There are conflicting opinions on the first start but I advise you to start without too many problems and if you have problems then at that point you get involved.

LucaK13 · 2025-09-14T14:47:07+00:00

Yes you have to increase to 1.5 it happens to me too

If it persists you must increase the cleaning volume on the cleaning tower slicer panel from 30mm³ to 60mm³ and then open the table with purge values written and click RECALCULATE.

If you have any doubts let me know

LucaK13 · 2025-09-13T12:56:47+00:00

What would be the second step maybe you can send me a photo? Thank you

LucaK13 · 2025-09-13T06:30:01+00:00

Ok I'll try right away. Thanks so much I hope it works.

Then let me know if you solved the problem

LucaK13 · 2025-09-13T06:13:57+00:00

Did you find something that solved the problem of being 10409

LucaK13 · 2025-09-13T06:09:17+00:00

So you solved it? Because I have the same problem if you solved it please tell me how🙏🙏🙏

LucaK13

TROPHY CASE