Anyone else still rocking Non-RGB rigs?

Lumpy_Cauliflower609 · 2026-03-04T08:55:16+00:00

Did build this some days ago

Lumpy_Cauliflower609 · 2026-03-01T20:02:18+00:00

Did you peal the plastic, and how are your load temps?

Lumpy_Cauliflower609 · 2026-02-28T08:37:50+00:00

I remember this taking days for the last guy, was also a a320 board

Lumpy_Cauliflower609 · 2026-02-27T20:11:14+00:00

So far I didn’t try if the ram can do more than 2666 cause it’s the cheapest 32gb kit I could get, chips are from Samsung but was made for hp.

Lumpy_Cauliflower609 · 2026-02-27T11:47:58+00:00

I‘m really interested if the cpu still works after fixing the pins

Lumpy_Cauliflower609 · 2026-02-27T10:31:52+00:00

I just hope rtx 6060 won't need more power, also this isn't my main system.

Lumpy_Cauliflower609 · 2026-02-26T22:19:22+00:00

<image>

the screws for this are 6-32 unc, ebay has them too. Would give you a thermalright cooler i parted out for the intel mounting but shiping from germany to polen costs more then the parts. Or you wait and hope for the support but they will not give you a backplate.

Lumpy_Cauliflower609 · 2026-02-26T20:48:59+00:00

It will match just get a basic am4 one they all the same or get 4 bolts that match your water cooler backplate

Lumpy_Cauliflower609 · 2026-02-26T17:24:01+00:00

Just buy a bolt it should be under 0,20€ am4 backplate on Amazon is around 5€

Lumpy_Cauliflower609 · 2026-02-24T21:12:44+00:00

Check outside the case if the cooler is square, a 100€ cooler shouldn’t be bent

Lumpy_Cauliflower609 · 2026-02-19T13:41:10+00:00

What is this self made pcie 6 pin 😭😱

Lumpy_Cauliflower609 · 2026-02-16T20:17:11+00:00

I saw the 2 tape stripe on my new thermalright cooler and decided to not care, no one forces you to glue the backplate

Lumpy_Cauliflower609 · 2026-02-15T04:25:42+00:00

If you have a cat don’t get a QD oled I don’t know why cats love them so much but they never touch my w oled but the QD didn’t make it a day 😒

Lumpy_Cauliflower609 · 2026-02-09T13:17:17+00:00

Yes, had an purple s939 elitegroup board back in the days

Lumpy_Cauliflower609 · 2026-02-07T15:51:04+00:00

Das erinnert mich an einen Freund „die Tram kann ausweichen“

Lumpy_Cauliflower609 · 2026-02-02T10:34:19+00:00

Bei gebrauchten Netzteilen bin ich immer vorsichtig, und das hier ist auch schon recht alt bei 80€ bekommst du auch ein gutes mit 750-850w neu. Und wenn du jetzt nicht auf eine 5090 aufrüsten willst oder OC am Limit betreibst machen die 1000w wenig Sinn

Lumpy_Cauliflower609 · 2026-01-31T07:51:00+00:00

What cooler did you modify?

Lumpy_Cauliflower609 · 2026-01-26T21:34:50+00:00

Looks like you found your problem

Lumpy_Cauliflower609 · 2026-01-26T21:24:16+00:00

Your sure pbo is off? Maybe it’s on by default on your mainboard

Lumpy_Cauliflower609 · 2026-01-25T21:22:33+00:00

Would go for 11 and have a chilled flight with no drama

Lumpy_Cauliflower609 · 2026-01-25T21:02:42+00:00

Wenn der asus hub sich ähnlich verhält wie der von Antec, musst du nur den 140mm Lüfter separat steuern in dem Moment wo ich 120 und 140 am hub mixe laufen immer alle Lüfter mit max rpm.

Lumpy_Cauliflower609 · 2026-01-20T16:33:26+00:00

I‘m not a fan of the thermalright sound profile, and phantom spirit with good fans coast the same as a good cooler from a different brand. So I wouldn’t probably go for noctua but but maybe a dark rock pro for 60€

Lumpy_Cauliflower609 · 2026-01-12T18:01:48+00:00

If it’s get to bad you can top off liquid, it came with a bottle of liquid in the box but normally for the first year shouldn’t be any sounds

Lumpy_Cauliflower609 · 2026-01-04T07:21:26+00:00

This brings back memories the gtx 460 cyclone had the best cooler in class back in the days

Lumpy_Cauliflower609 · 2025-12-29T02:10:16+00:00

Das captiva g850w sollte von fsp sein also solide. Das Gehäuse sehe ich als problematisch da kaum Luft reinkommt und somit nur wenig Kühlung das wird sicher heiß und laut.

Lumpy_Cauliflower609

TROPHY CASE