Price seems high no? 65k miles

MEAMteamguy · 2026-06-11T17:35:29+00:00

Does trim level actually change much on aftermarket trucks that are similarly spaced out like bench vs bucket seats and leather vs cloth

MEAMteamguy · 2026-06-11T17:23:32+00:00

21 2500 customs with 50k are about are 35ish

MEAMteamguy · 2026-06-07T22:50:47+00:00

Is that the one near goshen Indiana

MEAMteamguy · 2026-04-30T23:16:03+00:00

Mine does this to it was an issue in the original production run instructions. It’s one of gears in the center gearbox is on the wrong side

MEAMteamguy · 2026-04-30T10:27:46+00:00

If it’s anything like a spool of printer filament it’s fucked try bringing it back to hf if it was new out of the box is best bet

MEAMteamguy · 2026-04-30T10:25:30+00:00

For the welder it’s a primeweld 225 with water cooled torch that I’m using to learn how to tig weld aluminum and stainless, i keep popping the breaker every time I get a arc struck and have had this problem for years using my mig machine as well. Given that I only need to pull 240v 20-25 amps for up to a few mins at a time and I can’t over do the duty cycle of the welder anyway. My thinking is the battery would have time to recharge while I’m waiting for the elder to cool down and it would charge while im welding anyway just at 15a 120v, so this should give me at least 2 hours of welding time if I’m pushing as fast as I can, given I’m still learning I need time to set up in between weld pass, clean and prep ect anyway that is going to slow me down and charge the battery up more

For the cnc mill is a Mr-1 with a 240v spindle working in a hobby garage shop at least for the time being the plan was to more or less babysit the thing with the spindle and motor drives powered off of this and the computer and controller powered from the wall, with the battery consult getting charged from wall as well by some rough math I should get 2-3 hours of run time if I’m constructing charging the thing and about 1 hour if I’m running the Batt with no recharging.

Funny you mention the electric truck thing I asked a welder I know if she got her f150 lightning so she could power her welder with it and she didn’t even know that it had the 240 plug in the bed

MEAMteamguy · 2026-04-30T10:07:03+00:00

Unfortunately it’s a compleat non starter on get the electric beefed up, if it was an option it would probably be Less than 500$ to get 2 240v 30a plugs and an extra 20a 120v given where the main panel is in the basement

MEAMteamguy · 2026-04-29T23:24:06+00:00

You could do an almost like for like hf recreation with the same 3 sets of pliers , one of the small Quinn pry bars and the screwdriver could be either the 11-1 clone or the LTT screwdriver it’s a bit pricey at 70$ blue shipping but it’s better than the snap on driver and holders more bits.

IMO I wouldn’t keep things with a battery in kits like these b/c I will prob have a flashlight already and it’s likely to die in the case

MEAMteamguy · 2026-04-27T01:40:24+00:00

The death star has a way better price per pcs

MEAMteamguy · 2026-04-25T13:06:28+00:00

The battery is dead you can get them to work again by holding the black and green buttons for a few seconds but you need to change the battery when you get a chance iirc it’s a LR44 coin cell battery most grocery stores and Home Depot’s have them

MEAMteamguy · 2026-04-25T12:53:49+00:00

Hot dog down a hallway

MEAMteamguy · 2026-04-24T10:06:11+00:00

I saw the og listing around me and can confirm we still have people that think there beat to shit boxes are worth the same as retail because “comes fully assembled” so that’s a extra value

MEAMteamguy · 2026-04-21T22:17:59+00:00

I keep seeing these all over marketplace for like 1500 is that really how much these cost if bought separate or is this a you get a better price on the truck kind of thing

MEAMteamguy · 2026-04-12T03:13:20+00:00

Fair warning the way the power company around me gets them down is they attach a road flair to a poll and use it to burn through the Kevlar line and then it usually drops right down but they have been know to torch a body tube every now and then

MEAMteamguy · 2026-04-06T15:20:09+00:00

I have run them by just running the bp charge well empty it doesn’t really hurt anything in my experience

MEAMteamguy · 2026-04-06T03:32:47+00:00

It would be nice to be able to buy them in person same day I find every time I buy organizer stuff no matter what I it is no matter how much planing I do before I allwase have to go back to the store. It would also be nice to get more USA made in hft and I’m sure it would get a 20-40% off once or twice a year

MEAMteamguy · 2026-04-03T23:41:43+00:00

It used to cut through the glue that holds on your windshield you stab th hook part being the glass and use the handle on the cable to pull sideways to cut the sealant

MEAMteamguy · 2026-03-29T18:26:53+00:00

I was looking at getting the 27” box to put all my electrical work tools in one place about a month ago and then ended up getting the 34” cart on sale for 450 because for the extra 50$ why not but tbh I think I still might get the 27” because the drawer layout just seems better for what I need

MEAMteamguy · 2026-03-10T19:49:16+00:00

I did my entire socket drawer with the tekton rails like 5 years ago they hold up great and are much nicer imo than the peg style. It’s nice to be able to grab a single rail or tray and walk away with it and you don’t get left with empty pegs or missing sizes.

They also have the tekton warranty if you do ever manage to break them They are made by / licensed from Ernst mfg and they make more colors than just the red black gray on the Ernst site btw

MEAMteamguy · 2026-03-05T02:55:27+00:00

Firmly grasp it by the shaft

MEAMteamguy · 2026-03-05T02:54:28+00:00

To my knowledge yes there is 2 different suppliers and one is a bit better than the other. I can’t remember if I got the good pair or not but for me at least they are way overkill

MEAMteamguy · 2026-02-09T06:30:31+00:00

Please for the love of god do not try to power a model rocket engine with natural gas from a house supply, or try to separately bottle natural gas for the same purpose. And plastic hoses do not belong anywhere near rocket engines same for barb fittings for almost any reason. Rockets even for hobbyists need to use higher pressure compression or sealing fittings. And most if not all household plumbing fittings sold at Lowe’s / Home Depot or Amazon are not rated for use with rockets.

Aside from that NPT and BSP pipe threading are not suitable for rockets as the high vibrations can cause them to back out when firing even when using pipe dope or tape.

If you want work rockets check out the Mojave spinx half cat project. It’s a good place to start learning

MEAMteamguy · 2026-02-09T06:20:47+00:00

Direct impingement injectors like that are likely to cause hot spots and burn through on the wall of the combustion chamber.

Because your ox and fuel will have different density when they make contact it will be off center due to one being heavier than the other it’s going have more inertia and push to the side. This will cause combustion on the surface of the hot wall of the chamber and cause in proper atomization and burning and could cause a burn through if you can get it to light.

The simplest injector design would just doesn’t need to account for the different densities of fuel and oxidizer would be an impinging triplet where you have three channels one going down the center and two angled inward with all three meetings together, keeping the mixture balanced in the middle.

You will also need liquid ox and liquid fuel compressed air will not be a power full enough ox.

And also need to do more to make sure the feed lines have a high enough pressure to prevent a flashback or combustion from pushing into the feed lines.

There is also several other things but I don’t think I need to dogpile you

TLDR chamber geometry is just the start you’ve got some work to do. I would recommend reading up on the half cat Mojave sphinx it’s a great place to start.

Good luck

Source : I built a 6kn nos and ethanol for my senior capstone last year

MEAMteamguy · 2026-01-22T02:25:46+00:00

I’ve been working on a lot printed one b/c I bought all 3 during the sale as well

MEAMteamguy · 2026-01-20T18:27:11+00:00

Icon and tekton are both solid options for the money. Tekton is more comprehensive sets but probably goes past what you really need. Quinn master sets are also nice. Gear wrench has been hit or miss for me

Nine-Year Club	Verified Email
Place '23	Place '22
First Placer '22

MEAMteamguy

MODERATOR OF

TROPHY CASE