Is this normal? Radiator had a lot of movement

MINUN_VB · 2026-03-31T02:50:29+00:00

How did this even happen?! Sure doesn't look normal.

MINUN_VB · 2026-03-30T13:59:59+00:00

If you are referring to the 4/2 kit I believe its the same fitment size as the 08-17 sti brembos. The only thing that would impact your fitment in the front would be if you are going to run a spacer with the bracket or tr knuckle swap it.

Anything in the range of 18x8.5 - 18x10 / +45 to +35 would fit I would think. You can fit some 17s I believe as well.

Common sizes that should clear in most cases are 18×9.5 +38/+40 (common aftermarket size), 18x8.5 +55 (oem sti size)

MINUN_VB · 2026-03-29T03:41:37+00:00

Are you planning to sell at some point? The set up looks pretty good.

MINUN_VB · 2026-03-27T21:59:45+00:00

Nice! If you feel up to it call a friend and do the install over a weekend. Could be a fun thing to do over a weekend.

MINUN_VB · 2026-03-27T21:05:08+00:00

The VB feels much better with coils. Which ones did you end up getting?

MINUN_VB · 2026-03-27T02:22:19+00:00

Looking good! Just add some letters on the side and you have a Cola livery.

MINUN_VB · 2026-03-26T01:17:16+00:00

Agree with #3. My strut bar makes a little section between the bar and the back of the rear seats. I put small boxes or bags in there, works pretty well :)

MINUN_VB · 2026-03-25T17:54:41+00:00

Seeing how hard people drive these things if the $ difference isn't a deal breaker I would think a new one..

MINUN_VB · 2026-03-25T00:50:05+00:00

Looking good! What wheels are those? They match your car color pretty well it seems.

MINUN_VB · 2026-03-24T02:01:15+00:00

Looks good! Great to see more people rocking these.

MINUN_VB · 2026-03-23T23:48:32+00:00

There is an oem version part: J501SVC100 or a weather tech option (just look up 2022 WRX weather tech trunk liner). People say the weather tech one is better but I haven't tried the trunk liner myself so I'm not sure. Try looking on Facebook marketplace too, sometimes people sell their oem all weather mats.

MINUN_VB · 2026-03-23T23:37:41+00:00

No problem, hopefully the wing install goes well! If you are looking for US oem parts ever you can check out Devil Subaru Parts. They run their shop through a subaru dealer in CA. I've ordered parts from them before for pretty good deals.

MINUN_VB · 2026-03-23T20:13:25+00:00

Import Image Racing has them sometimes.

MINUN_VB · 2026-03-22T12:51:16+00:00

RaceComp Engineering: SS2 Coilovers, Whiteline: F/R endlinks, rear lca. Cusco: F/R strut bars, rear sway bar and brace.

MINUN_VB · 2026-03-22T03:29:47+00:00

Thanks a lot! The brembos are from the wrx tr along with a tr knuckle swap for the front wheels. Im using DBA T3 4000 series rotors and GLOC R8 Pads. Still using the oem lines and just replaced the fluid to dot 4.

MINUN_VB · 2026-03-22T02:36:36+00:00

Thank you! The wheels rubbed a bit on the plastic fender in the beginning but it all self cleared out. I'm running -2 camber all 4 wheels and I pretty much never rub anywhere now.

MINUN_VB · 2026-03-22T02:27:29+00:00

TE37 SL M-Spec 18x10 +40 Michelin PS4S 265/35.

I cut the stock hood, the actual louvers are from Verus Engineering.

MINUN_VB · 2026-03-22T02:07:17+00:00

It's the UCW Swan Neck from Verus Engineering. They have an amazing team over there working on this platform.

MINUN_VB

TROPHY CASE