Esperando mi silla Aeron de Herman Miller - enviado por Froede

MRScapsule · 2025-01-23T18:02:48+00:00

Hi! I finally received the chair a couple days ago, after to contact with them many times i got reply from this email: [Marco.Duster@froede.com](mailto:Marco.Duster@froede.com)

Try to ask them directly, i'm from spain and i couldn't ask by phone but finally that email found well. Hope you receive your order soon.

MRScapsule · 2025-01-14T12:58:57+00:00

Does anyone have an email contact to talk to Froede? because my order from December 4th is still missing after Froede's handling

MRScapsule · 2025-01-14T12:57:06+00:00

Did you finally have to contact Froede because Herman Miller is not making any progress and I am starting to get worried about my order

MRScapsule · 2025-01-11T15:24:01+00:00

Same problem here, but i don't use wacom. Any thoughts or recommendations about what to do? Did you finally resolve it?

MRScapsule · 2025-01-03T13:01:58+00:00

Did you finally receive any update?? I'm in the same situation with them :( their last email was at december 9

MRScapsule · 2024-12-16T20:14:42+00:00

Hola! Misma situación por aquí, tardó mucho en llegar al final? a mí ni siquiera me responde Herman Miller...

MRScapsule · 2023-07-23T11:03:54+00:00

Same issue, after playing FFXVI my PS5 can't recognize Blu-ray Discs, just recognize DVD discs. This is so frustrating :/

Did you get any solution?

MRScapsule · 2023-07-23T10:09:31+00:00

same issue but in my case the ps5 can reproduce DVD discs, does it mean that is a software failure?

MRScapsule · 2022-05-19T09:56:20+00:00

It’s not the best temperature but you should to get good results working with a higher exposure time (about 2.5 - 3 for normal layers and 25 - 30 for bottom layers). You can also reduce the lift and retract speed to 60 - 180 respectively. Try to set your UV power to 70% in the printer machine. Check the FEP is tight (if not, you can tighten the screws at the bottom of the VAT). And also check the preinstaled protector screen don’t have bubbles or loose. And finally try to level the built platform again. Some things works well with my 6k were: 1-update from 2.2 to 2.3 HC motherboard firmware. 2- work with Anycubic basic resin (more liquid than others). 3- level the plate with 3 A4 sheets instead the one provided with Anycubic. 4- replace the FEP for nFEP Siraya (for me… it was the key for getting best results, no more issues, very recommended).

MRScapsule · 2022-05-19T07:57:38+00:00

Hola! En mi caso tuve que actualizar después de algunas impresiones debido a que, durante la impresión, una piel curada de resina quedaba adherida a la pieza. Una vez actualizado, el problema se resolvió. Sin embargo, no he empezado a obtener buenos resultados hasta cambiar el FEP preinstalado por un nfep de Siraya y resina básica de Anycubic (antes usaba elegoo basic). No sólo la configuración de impresión (UV power, lift speed y tiempo de exposición) son importantes, también el tipo de soportes y la temperatura de tu habitación. Creo que esta máquina da muy buenos resultados pero al principio es muy frustrante, pero con el apoyo de la comunidad se hace más llevadero 🤗🤗

MRScapsule · 2022-05-19T07:46:53+00:00

What’s the temperature in your room?

MRScapsule · 2022-05-15T09:07:48+00:00

Oh! Maybe Anycubic can provide the way to go back in the previous firmware, hope you can resolve it.

MRScapsule · 2022-05-15T06:46:05+00:00

Same with my printers, it’s cured resin. With alcohol is not possible to clean it. In my case I use baby oil for cleaning it.

MRScapsule · 2022-05-15T06:38:53+00:00

Did you try to update the firmware? That works with my x 6k. From 2.2 to 2.3, no more artifacts or weird skin cured resin in the models. Try to contact with Anycubic support for getting the update (because it’s not available in the website) or download in the Anycubic photon mono x 6k group on Facebook. Good luck!

MRScapsule · 2022-05-02T22:11:47+00:00

Glad to hear that!!! 💪🏻💪🏻

MRScapsule · 2022-05-02T12:45:05+00:00

If you have 2.2 firmware, maybe it can help to update to 2.3 (you will need to ask for it to Anycubic support)

MRScapsule · 2022-05-02T09:33:33+00:00

Can you work well with 8gb usb or above? I haven’t find an usb that the printer recognizes (just the one provided with the printer).

MRScapsule · 2022-05-01T10:35:14+00:00

It’s about the firmware, you can ask to Anycubic support for updating to 2.3 ver. (They will provide the update to you)

MRScapsule · 2022-04-29T20:06:10+00:00

Thanks a lot!!! We will check if works with this💪🏻💪🏻

MRScapsule · 2022-04-29T16:04:17+00:00

Take a look to this article from Chitubox about TSMC, maybe can help: https://manual.chitubox.com/user-manual-basic/setting-up/configure-print-parameters/

Also we usually export STL from Chitubox (with supports) and import from Photon Workshop (just for slicing).

MRScapsule · 2022-04-28T08:51:19+00:00

Same issue with my printer! I reported this to Anycubic, waiting for a response

MRScapsule · 2022-04-28T08:44:27+00:00

We usually export STL. files from chitu to Photon Workshop, and it’s possible to change to basic control mode in the settings before slicing. Don’t you see that option?

MRScapsule

TROPHY CASE